Atazanavir/ Ritonavir Tablets 300 mg/100 mg

Indications

• HIV infection in combination with other antiretroviral drugs
• HIV infection in patients previously treated with antiretroviral therapy

Dosage

Children: Children 30 kg and above: 1 tablet (300 mg) twice daily. For children aged 2–17 years: 375 mg twice daily for 15–29 kg, 450 mg twice daily for 30–39 kg, 600 mg twice daily for 40 kg and above. Refer to BNF for Children for specific dosing.

Adults: 1 tablet (300 mg) once daily, taken with food.

Mechanism of action

Atazanavir inhibits the HIV protease enzyme, preventing the cleavage of viral polyproteins into functional proteins, thus inhibiting the maturation of infectious viral particles.

Pharmacodynamics

Atazanavir exhibits antiviral activity against HIV, which is primarily dependent on the inhibition of the HIV protease. This leads to a decrease in viral load and an increase in CD4 cell count in HIV-positive patients.

Pharmacokinetics

Atazanavir is metabolized by the liver, primarily via the cytochrome P450 system (CYP3A4). It has oral bioavailability and its elimination half-life is approximately 7 hours. Renal impairment does not significantly affect its clearance, but caution is advised in patients with severe hepatic impairment.

Contra-indications

• Acute porphyrias

Adverse effects

• Hematuria
• Depression
• Disorientation
• Memory loss
• Myopathy
• Eosinophilia
• Nephritis
• Tubulointerstitial nephritis
• Proteinuria
• Syncope
• Torsade de pointes
• Increased urinary frequency
• Severe rash

Interactions

• Atazanavir + combined hormonal contraceptives: Moderate (affects exposure)
• Atazanavir + dolutegravir: Moderate (increases exposure)
• Atazanavir + macrolides: Moderate (increases exposure)
• Atazanavir + clarithromycin: Moderate (increases exposure)
• Atazanavir + bictegravir: Unknown (increases exposure)
• Atazanavir + maraviroc: Unknown (increases exposure)
• Atazanavir + raltegravir: Unknown (increases exposure)
• Atazanavir + high-dose: Unknown (increases exposure)

Precautions

• Caution in mild hepatic impairment; avoid in moderate to severe impairment
• Monitor viral load and atazanavir concentration during pregnancy
• Avoid if estimated glomerular filtration rate is less than 50 mL/minute/1.73 m2

Pregnancy

Theoretical risk of hyperbilirubinaemia in neonate if used at term.

Breast-feeding

null

Storage

Store in a cool, dry place. Protect from light.

Formulations

• Atazanavir 150 mg capsule
• Atazanavir 200 mg capsule
• Atazanavir 300 mg capsule

Indications

• HIV infection in combination with other antiretroviral drugs

Dosage

Children: For children over 2 years of age

Adults: The typical adult dose of ritonavir is 100–200 mg taken 1–2 times a day. For high-dose ritonavir used as a booster, the recommended dose is 800/200 mg once daily, but this should only be used in patients with an HIV strain that has fewer than 3 mutations to protease inhibitors.

Mechanism of action

Ritonavir inhibits the HIV protease enzyme, which is crucial for the cleavage of the viral polyprotein precursors into functional proteins essential for the formation of infectious HIV particles. By binding to the active site of the protease, ritonavir prevents this cleavage, leading to the production of non-infectious viral particles. Additionally, ritonavir is a potent inhibitor of the cytochrome P450 CYP3A4 isoenzyme, which enhances the pharmacokinetic profile of other protease inhibitors by reducing their metabolism.

Pharmacodynamics

Ritonavir exhibits antiviral activity specifically against HIV-1 by preventing the function of the viral protease. This inhibition disrupts the normal life cycle of HIV, resulting in immature viral particles that cannot propagate infection. Ritonavir is generally administered in conjunction with other antiretroviral therapies to achieve a synergistic effect, enhancing the overall antiviral activity and therapeutic success.

Pharmacokinetics

Ritonavir is well-absorbed when taken orally, with peak plasma concentrations occurring approximately 2 to 4 hours post-administration. Its bioavailability is influenced by food intake. The drug is extensively metabolized in the liver, primarily by the CYP3A4 enzyme. Ritonavir has a half-life of about 3 to 5 hours in adults, requiring multiple daily doses to maintain effective plasma levels. The drug is excreted mainly in feces, with minimal renal excretion.

Contra-indications

• Severe hepatic impairment
• Severe renal impairment
• History of pancreatitis

Adverse effects

• Nausea
• Diarrhea
• Vomiting
• Abdominal pain
• Increased risk of infections
• Pancreatitis
• Hyperlipidemia
• Fat redistribution
• Liver enzyme elevation
• Cardiac conduction disorders
• Visual impairment
• Peripheral neuropathy
• Hypersensitivity reactions

Interactions

• Ritonavir + antipsychotics (second-generation): Severe (affects exposure)
• Ritonavir + clozapine: Severe (affects exposure)
• Ritonavir + benzodiazepines: Severe (increases exposure)
• Ritonavir + diazepam: Severe (increases exposure)
• Ritonavir + flurazepam: Severe (increases exposure)
• Ritonavir + clopidogrel: Severe (decreases efficacy)
• Ritonavir + glecaprevir: Severe (increases exposure)
• Ritonavir + opioids: Severe (increases risk of central nervous system toxicity)
• Ritonavir + pethidine: Severe (increases risk of central nervous system toxicity)
• Ritonavir + tepotinib: Severe (increases exposure)

Precautions

• Monitor liver function tests regularly
• Use with caution in patients with a history of cardiac conduction disorders
• Evaluate signs of pancreatitis, discontinue if diagnosed
• Avoid use in severe impairment of hepatic or renal function
• Consider potential for drug interactions due to CYP3A4 inhibition

Pregnancy

Use during pregnancy only if the potential benefit justifies the potential risk to the fetus. Ritonavir is classified as Category B.

Breast-feeding

Ritonavir is excreted in breast milk. Weigh the benefits of breastfeeding against the potential risks of HIV transmission or adverse effects to the infant.

Storage

Store at room temperature, away from moisture and heat. Keep out of reach of children.

Formulations

• Ritonavir 50 mg tablets

Indications

• Hypovolemic shock
• Severe burns
• Postoperative fluid replacement
• Sepsis
• Trauma management

Dosage

Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Mechanism of action

Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.

Pharmacodynamics

The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.

Pharmacokinetics

Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.

Adverse effects

• Allergic reactions
• Injection site reactions
• Nausea
• Vomiting
• Headache
• Fever

Precautions

• Use with caution in patients with known allergies to any component of the formulation
• Monitor for signs of hypersensitivity during administration
• Consider volume overload in patients with cardiac or renal impairment

Pregnancy

The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.

Storage

Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.

Formulations

• Colloidal silver
• Colloidal gold
• Colloidal iron
• Other metal colloids

Indications

• Used as a binder in tablet formulations
• Acts as a stabilizer in liquid formulations
• Serves as a film-forming agent in topical preparations

Dosage

Children: Refer to specific formulations for guidance; dosages will vary based on the formulation and therapeutic use.

Adults: Refer to specific formulations for guidance; dosages will vary based on the formulation and therapeutic use.

Mechanism of action

Copovidone acts primarily as a binder in solid dosage forms. It forms a cohesive gel in the presence of moisture, which helps in the agglomeration of powder particles, thus improving the mechanical strength and integrity of tablets. Additionally, copovidone can enhance drug solubility and dissolution rate, thereby facilitating better absorption of active pharmaceutical ingredients.

Pharmacodynamics

As a polymer, copovidone does not exert a pharmacological effect in the traditional sense but plays a crucial role in the pharmaceutical formulation process. It aids in the uniform distribution of active ingredients and can enhance the stability of formulations, thereby ensuring consistent therapeutic efficacy. Its properties allow for the sustained release of drugs when used in controlled-release formulations.

Pharmacokinetics

Copovidone is not absorbed in the gastrointestinal tract and therefore does not exhibit systemic pharmacokinetics. Instead, it remains in the gastrointestinal lumen, where it can affect the release and absorption of other co-administered drugs. Its degradation products are typically non-toxic and are excreted without causing harm to the body.

Adverse effects

• Hypersensitivity reactions
• Nausea
• Vomiting
• Diarrhea
• Abdominal pain

Precautions

• Use with caution in patients with known allergies to polyvinyl compounds
• Evaluate risk of allergic reactions in sensitive individuals

Pregnancy

Safety during pregnancy has not been established. Use only if clearly needed and potential benefits justify the risks.

Breast-feeding

It is not known whether copovidone is excreted in human milk. Caution is advised when administering to nursing mothers.

Storage

Store in a cool, dry place, protected from light. Keep out of reach of children.

Formulations

• Oral tablets
• Capsules
• Topical ointments

Indications

• Used as an excipient in solid dosage forms
• Facilitates drug disintegration and dissolution

Dosage

Children: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Adults: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Mechanism of action

Crospovidone acts by rapidly absorbing water and swelling upon contact with moisture. This action leads to the disintegration of solid dosage forms, thus increasing the surface area of the active ingredients and promoting their dissolution and subsequent absorption in the gastrointestinal tract. It does not affect the pH of the formulation, ensuring that the active ingredients remain stable.

Pharmacodynamics

Crospovidone exhibits properties that enhance the bioavailability of active ingredients in pharmaceutical formulations. Its ability to rapidly disintegrate tablets and capsules leads to quicker release and absorption of the drug into systemic circulation. As a disintegrant, it aids in the effective delivery of drugs that may otherwise be poorly soluble.

Pharmacokinetics

Crospovidone itself is not absorbed systemically when administered orally. It remains in the gastrointestinal tract, where it performs its function as a disintegrant. The pharmacokinetic profile of drugs formulated with crospovidone may be influenced by the enhanced dissolution and absorption rates provided by this excipient.

Pregnancy

Crospovidone is considered to have low toxicity and is generally regarded as safe for use during pregnancy, but specific studies are limited.

Breast-feeding

There is insufficient data on the excretion of crospovidone in human milk, but it is deemed safe for use during breastfeeding.

Storage

Store in a cool, dry place away from light and moisture, in tightly closed containers.

Formulations

• Powder
• Tablets

Indications

• Calcium deficiency
• Osteoporosis prevention
• Osteomalacia
• Rickets
• Dietary supplementation in individuals with increased calcium and phosphorus requirements

Dosage

Children: Refer to established guidelines for specific dosing based on clinical indications and individual patient needs.

Adults: Refer to established guidelines for specific dosing based on clinical indications and individual patient needs.

Mechanism of action

Dicalcium phosphate dissociates in the gastrointestinal tract to release calcium and phosphate ions. Calcium plays a vital role in various physiological processes, including muscle contraction, neurotransmitter release, and blood coagulation. The phosphate ions are essential for energy metabolism and are integral to the formation of ATP (adenosine triphosphate), nucleic acids, and cellular membranes. The availability of these ions supports bone mineralization and overall skeletal integrity.

Pharmacodynamics

The pharmacodynamics of dicalcium phosphate involves its role in maintaining calcium and phosphate homeostasis in the body. Adequate levels of calcium are critical for normal bone metabolism, while phosphate is necessary for the formation of hydroxyapatite in bone tissue. The balance of these minerals is regulated by hormones such as parathyroid hormone and calcitriol, which modulate their absorption in the intestines and reabsorption in the kidneys. Supplementation with dicalcium phosphate can help alleviate deficiencies and support bone health.

Pharmacokinetics

Dicalcium phosphate is absorbed in the gastrointestinal tract, with varying absorption rates depending on the presence of other dietary components. Calcium absorption occurs primarily in the small intestine, while phosphate absorption can occur throughout the gastrointestinal tract. After absorption, calcium is distributed to bones, teeth, and soft tissues, while excess calcium is excreted through urine. The pharmacokinetics may be influenced by factors such as age, dietary habits, and the presence of gastrointestinal disorders.

Adverse effects

• Gastrointestinal disturbances (nausea, constipation)
• Hypercalcemia
• Kidney stones
• Fatigue
• Muscle weakness

Interactions

• May interact with calcium channel blockers
• Increased risk of hypercalcemia with thiazide diuretics
• May affect the absorption of certain antibiotics (e.g., tetracyclines)

Precautions

• Use with caution in patients with renal impairment
• Monitor calcium levels in patients receiving high doses
• Consider potential interactions with other medications

Pregnancy

Dicalcium is generally considered safe in pregnancy when used as directed, but high doses should be avoided.

Breast-feeding

Calcium is an essential nutrient during breastfeeding, but excessive supplementation should be approached with caution.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Formulations

• Tablets
• Powders
• Chewable tablets

Indications

• Monitoring respiratory function
• Assessment of metabolic status
• Management of respiratory acidosis
• Management of respiratory alkalosis

Dosage

Children: Dosing for interventions related to carbon dioxide levels in pediatric patients should be guided by clinical protocols and the BNF for Children.

Adults: Dosing for interventions related to carbon dioxide levels is typically based on clinical assessment and individual patient needs. Refer to clinical guidelines for specific scenarios.

Mechanism of action

Carbon dioxide acts primarily as a signaling molecule in the body, influencing respiratory drive and blood pH. It is produced during cellular respiration and is a critical component of the bicarbonate buffering system, which helps maintain acid-base homeostasis. Elevated levels of CO2 in the blood stimulate ventilation in the lungs, increasing the rate of gas exchange and facilitating the removal of excess CO2.

Pharmacodynamics

The pharmacodynamic effects of dioxides, particularly carbon dioxide, are closely related to its concentration in the blood. As CO2 levels increase, it leads to respiratory acidosis, which can stimulate the respiratory centers in the brain to increase ventilation. Conversely, low levels of CO2 can cause respiratory alkalosis, potentially leading to decreased respiratory drive. CO2 also plays a role in vasodilation and can affect blood flow and pressure through its influence on smooth muscle tone.

Pharmacokinetics

Carbon dioxide is produced endogenously during metabolic processes and is transported in the bloodstream primarily in three forms: dissolved in plasma, as bicarbonate ions (HCO3-), and bound to hemoglobin. The half-life of CO2 in the bloodstream is very short due to its rapid exchange with alveolar gas in the lungs. The elimination of CO2 occurs through exhalation, making it a dynamic component of respiratory physiology.

Pregnancy

Data on the effects of dioxide during pregnancy are limited. Caution is advised due to potential risks associated with exposure.

Breast-feeding

Limited data are available regarding the excretion of dioxide in human milk. Caution is recommended.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Indications

• Iron deficiency anemia
• Chronic blood loss
• Nutritional iron deficiency
• Pregnancy-related anemia

Dosage

Children: Refer to the BNF for Children for specific dosing information as it may vary based on the formulation and clinical context.

Adults: Refer to the BNF for specific dosing information as it may vary based on the formulation and clinical context.

Mechanism of action

Ferric ions participate in various biological processes, including oxygen transport and electron transfer. They facilitate the formation of hemoglobin in red blood cells, allowing for efficient oxygen delivery throughout the body. Ferric compounds can also promote the absorption of iron from the gastrointestinal tract by providing a more bioavailable form of iron.

Pharmacodynamics

Ferric compounds exhibit their effects primarily through the restoration of iron levels in the body. This leads to improved synthesis of hemoglobin and overall enhancement of oxygen-carrying capacity. The pharmacological action is dose-dependent, with higher doses leading to more pronounced effects on hemoglobin levels and erythropoiesis. Additionally, ferric ions can influence various metabolic pathways involved in cellular respiration and energy production.

Pharmacokinetics

Ferric is absorbed in the gastrointestinal tract, with absorption rates influenced by dietary factors and the presence of other substances in the gut. Once absorbed, ferric ions are transported in the bloodstream bound to transferrin, a transport protein. The body regulates iron levels primarily through absorption rather than excretion, and excess iron can be stored in the liver, spleen, and bone marrow. The elimination of ferric compounds is generally slow, as they are incorporated into various biological systems or stored for future use.

Contra-indications

• Hypersensitivity to ferric compounds
• Iron overload conditions such as haemochromatosis or haemosiderosis
• Chronic liver disease
• Active peptic ulcer disease

Adverse effects

• Gastrointestinal disturbances including nausea, vomiting, and constipation
• Diarrhea
• Abdominal pain
• Black stools
• Allergic reactions including rashes and anaphylaxis
• Staining of teeth (with oral formulations)

Interactions

• Antacids may reduce the absorption of oral ferric preparations
• Tetracyclines and quinolone antibiotics may have reduced absorption when taken with iron
• Ascorbic acid may enhance the absorption of iron

Precautions

• Caution in patients with a history of gastrointestinal disease
• Monitor for signs of iron overload in patients receiving repeated doses
• Use with caution in patients with renal impairment

Pregnancy

Ferric compounds are generally considered safe in pregnancy when used as directed to treat iron deficiency, but should be used under medical supervision.

Breast-feeding

Ferric compounds are excreted in breast milk in small amounts, usually considered safe but should be used under medical supervision.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Oral tablets
• Oral solution
• Intravenous injection

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Indications

• Antimicrobial agent
• Support for immune function
• Gastrointestinal health
• Emulsifying agent in food products

Dosage

Children: Refer to specific product guidelines or consult a healthcare provider, as dosing can vary based on the formulation and intended use.

Adults: Refer to specific product guidelines or consult a healthcare provider, as dosing can vary based on the formulation and intended use.

Mechanism of action

Monolaurate exhibits its antimicrobial activity primarily through disruption of lipid membranes of bacteria, viruses, and fungi. Its mechanism involves the incorporation into the lipid bilayer of microbial cell membranes, leading to increased permeability and eventual cell lysis. This action makes it effective against a wide range of pathogens, including Gram-positive and Gram-negative bacteria.

Pharmacodynamics

Monolaurate has been shown to possess antiviral, antibacterial, and antifungal properties. The compound works by destabilizing the lipid membranes of pathogens, which can lead to their death. Additionally, it may enhance the immune response by promoting the activity of immune cells, although the exact pathways involved are still being explored. The effects of monolaurate can vary based on the concentration used and the specific microorganisms targeted.

Pharmacokinetics

Monolaurate is absorbed in the gastrointestinal tract and is rapidly metabolized into free fatty acids and glycerol. The medium-chain fatty acids can be readily transported to the liver and utilized for energy or converted into ketone bodies. Its bioavailability can be influenced by dietary fats present in the meal, as fats can enhance the absorption of monolaurate. The elimination half-life and specific metabolic pathways in humans are not well characterized, necessitating further research.

Pregnancy

There is insufficient data to determine the safety of monolaurate during pregnancy. Caution is advised.

Breast-feeding

Limited information is available on the safety of monolaurate during breastfeeding. Consult a healthcare provider before use.

Storage

Store in a cool, dry place, away from direct sunlight and heat.

Formulations

• Capsules
• Powder
• Liquid

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Mechanism of action

Oxides do not have a single mechanism of action as they are a broad category of compounds. However, in general, metal oxides can exhibit catalytic properties, while non-metal oxides may participate in biochemical reactions by forming acids or bases upon dissolution in water.

Pharmacodynamics

The pharmacodynamics of oxides depend on the specific type of oxide and its interaction with biological systems. For instance, metal oxides may have antimicrobial properties, while certain non-metal oxides can influence metabolic pathways through their acid-base chemistry. The effects vary widely, necessitating specific studies for each oxide's role in therapeutic contexts.

Pharmacokinetics

The pharmacokinetics of oxides are also variable. Many metal oxides are poorly soluble and thus have limited absorption when ingested. Non-metal oxides, such as carbon dioxide, can be readily absorbed and utilized in metabolic processes. The distribution, metabolism, and excretion of oxides depend on their chemical form and the biological system in which they are involved.

Pregnancy

Not applicable as oxide is not a drug but a class of chemical compounds.

Breast-feeding

Not applicable as oxide is not a drug but a class of chemical compounds.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Used as a binding agent in tablet formulations
• Serves as a disintegrant to enhance drug release
• Acts as a filler in capsule formulations

Dosage

Children: Refer to specific formulation guidelines and BNF for Children for detailed dosing instructions, as pregelatinized starch is an excipient and does not have a standalone dosage.

Adults: Refer to specific formulation guidelines and BNF for detailed dosing instructions, as pregelatinized starch is an excipient and does not have a standalone dosage.

Mechanism of action

Pregelatinized starch acts as a disintegrant in pharmaceutical formulations. Upon contact with water, it swells and ruptures, facilitating the breakup of tablets and aiding in the release of the active ingredient. This mechanism improves the dissolution and absorption of drugs in the gastrointestinal tract.

Pharmacodynamics

The pharmacodynamic properties of pregelatinized starch are linked to its ability to enhance the solubility and bioavailability of active ingredients. It does not exert a therapeutic effect on its own but improves the performance of drug formulations by promoting rapid disintegration and dissolution.

Pharmacokinetics

Pregelatinized starch is not absorbed in the gastrointestinal tract, as it primarily functions as an excipient. It passes through the digestive system and is excreted unchanged. Its rapid swelling and disintegration properties facilitate the release of other compounds within the formulation, impacting their pharmacokinetic profiles.

Pregnancy

Pregelatinized starch is generally considered safe during pregnancy, as it is a food-grade ingredient. However, it is advisable to consult a healthcare provider before use.

Breast-feeding

Pregelatinized starch is unlikely to pose a risk during breastfeeding as it is commonly used in food products. Consultation with a healthcare provider is recommended for specific concerns.

Storage

Store in a cool, dry place away from moisture and heat. Keep in tightly closed containers.

Formulations

• Pregelatinized starch powder
• Tablets containing pregelatinized starch as excipient
• Capsules containing pregelatinized starch as excipient

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Diarrhea
• Gastrointestinal infections
• Toxin elimination

Dosage

Children: Refer to the BNF for Children for specific dosing guidelines as they are dependent on the formulation and condition being treated.

Adults: Refer to the BNF for specific dosing guidelines as they are dependent on the formulation and condition being treated.

Mechanism of action

Silicates function by adsorbing toxins and pathogens in the gastrointestinal tract, thereby reducing their absorption into the systemic circulation. This mechanism is particularly beneficial in conditions such as diarrhea or gastrointestinal infections, where the reduction of harmful substances can help alleviate symptoms.

Pharmacodynamics

The pharmacodynamics of silicates are characterized by their ability to bind with various substances in the gut, including toxins, bacteria, and other pathogens. This binding helps in reducing the irritative effects of these substances on the intestinal lining and can assist in normalizing bowel function.

Pharmacokinetics

Silicates are generally not absorbed systemically after oral administration. They act locally within the gastrointestinal tract, where they exert their effects. Due to their physical properties, they can remain in the gut for prolonged periods, enhancing their efficacy in adsorbing harmful agents.

Pregnancy

There is limited data on the use of silicates during pregnancy. It is advisable to avoid use unless clearly needed.

Breast-feeding

Silicates are not known to be excreted in human milk. Caution is advised when using.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Potential role in bone health
• Support for connective tissue formation
• May aid in mineral metabolism

Dosage

Children: There is no established clinical dosage for silicon in paediatric populations, as it is not classified as an essential nutrient.

Adults: There is no established clinical dosage for silicon in adults, as it is not classified as an essential nutrient.

Mechanism of action

Silicon is believed to enhance the synthesis of glycosaminoglycans and collagen, which are important for the structural integrity of connective tissues. It may also influence the activity of certain enzymes involved in bone mineralization, thus playing a role in maintaining bone density and health.

Pharmacodynamics

The pharmacodynamics of silicon is not fully elucidated; however, it is thought to involve the modulation of bone metabolism and the promotion of connective tissue health. Silicon may have a synergistic effect with other minerals, such as calcium and magnesium, aiding in their utilization and metabolism in the body.

Pharmacokinetics

The pharmacokinetics of silicon is complex, as it is not absorbed through typical gastrointestinal pathways. Instead, silicon is thought to be taken up in the form of silicates and then distributed throughout the body, particularly in connective tissues. The elimination of silicon occurs primarily through renal excretion, with some variations depending on dietary intake and individual metabolism.

Pregnancy

Silicon is generally considered safe during pregnancy, as it is a naturally occurring element in the human body. However, specific recommendations regarding supplementation should be followed based on the advice of a healthcare provider.

Breast-feeding

Silicon is present in breast milk in small amounts. Its safety during breastfeeding is generally regarded as acceptable, although supplementation should be approached with caution and under medical advice.

Storage

Silicon should be stored in a cool, dry place, protected from light and moisture. Follow specific storage recommendations provided by the manufacturer if available.

Indications

• Emulsifying agent in topical formulations
• Stabilizing agent in oral drug formulations
• Food industry applications as an emulsifier
• Cosmetic formulations

Dosage

Children: Refer to specific formulation guidelines for dosage recommendations.

Adults: Refer to specific formulation guidelines for dosage recommendations.

Mechanism of action

Sorbitan acts primarily as a surfactant and emulsifier. Its amphiphilic nature allows it to reduce the surface tension between oil and water, thereby facilitating the formation and stabilization of emulsions. The hydrophilic part of the sorbitan molecule interacts with water, while the lipophilic part interacts with oils, promoting the mixing of immiscible liquids.

Pharmacodynamics

As an emulsifier, sorbitan enhances the bioavailability of lipophilic drugs by aiding their dispersion in aqueous environments. This property is particularly valuable in formulations where uniform distribution of active ingredients is critical for efficacy. Sorbitan may also impact the release profiles of drugs from emulsified formulations, potentially affecting the onset of action.

Pharmacokinetics

Sorbitan is generally considered to be poorly absorbed when administered orally, leading to minimal systemic exposure. Its primary role is local, serving as an excipient in formulations rather than as an active therapeutic agent. Due to its emulsifying properties, it may enhance the solubility and absorption of other drugs in the gastrointestinal tract, but the absorption characteristics of sorbitan itself are limited. Metabolism and excretion details specific to sorbitan are not well-documented, as it typically functions in a non-systemic capacity.

Pregnancy

Sorbitan has not been well studied in pregnant women. Use during pregnancy should be based on a risk-benefit assessment.

Breast-feeding

Sorbitan is generally considered safe during breastfeeding, however, there is limited data available.

Storage

Store at room temperature, away from moisture and heat. Keep container tightly closed.

Formulations

• Sorbitan monooleate
• Sorbitan monostearate
• Sorbitan tristearate

Indications

• Nutritional supplementation
• Energy source in enteral nutrition
• Excipient in pharmaceutical formulations

Dosage

Children: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Adults: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Mechanism of action

Starch is broken down into glucose units by enzymes such as amylase during digestion. The glucose is then absorbed in the intestines and utilized for energy production in the body's cells. This pathway involves hydrolysis of the glycosidic bonds, converting starch into simpler sugars.

Pharmacodynamics

Starch primarily serves as an energy source. Its digestion and absorption lead to an increase in blood glucose levels, which provides energy for metabolic processes. In this context, it plays a crucial role in maintaining energy homeostasis in the body.

Pharmacokinetics

Starch is not absorbed in its polymeric form; it must first be enzymatically hydrolyzed into simpler sugars such as maltose and glucose. The digestion and absorption of starch occur predominantly in the small intestine, with glucose being readily absorbed into the bloodstream. The rate of absorption can vary depending on the type of starch and its physical form.

Adverse effects

• Allergic reactions
• Gastrointestinal discomfort
• Diarrhea
• Constipation

Precautions

• Use with caution in individuals with known allergies to starch or starch derivatives
• Monitor for gastrointestinal symptoms in patients with a history of digestive disorders

Pregnancy

Starch is generally considered safe for use during pregnancy. However, it should be consumed in moderation as part of a balanced diet.

Breast-feeding

Starch is deemed safe for nursing mothers when used in moderation as part of a balanced diet.

Storage

Store in a cool, dry place away from moisture and direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Suspensions

Indications

• Dry skin conditions
• Cosmetic formulations
• Emollient in topical creams and lotions
• Emulsifying agent in pharmaceutical preparations

Dosage

Children: For pediatric use, refer to specific product formulations and guidelines, as dosing may vary based on the formulation and concentration.

Adults: Stearyl alcohol is used topically in various formulations. Specific dosing is typically determined by the formulation and intended use, refer to product guidelines for detailed instructions.

Mechanism of action

Stearyl alcohol functions primarily as an emollient and emulsifier. It aids in the formation of stable emulsions by reducing the surface tension between oil and water phases, allowing for the creation of creams and lotions. Its hydrophobic tail interacts with lipids, while the hydroxyl group can form hydrogen bonds with water, enhancing moisture retention in the skin.

Pharmacodynamics

Stearyl alcohol acts by providing a protective barrier on the skin, reducing transepidermal water loss and enhancing hydration. Its emollient properties make it effective in softening and smoothing the skin, which can alleviate dryness and improve the overall appearance of the skin. Additionally, it can enhance the delivery of other active ingredients in topical formulations.

Pharmacokinetics

Stearyl alcohol is not significantly absorbed systemically when applied topically. Its primary action is local to the site of application, where it exerts its emollient effects. The compound is metabolized in the body to various fatty acids and alcohols, and it is excreted primarily through the skin and gastrointestinal tract, with minimal systemic exposure.

Pregnancy

Stearyl is generally considered safe for use during pregnancy; however, specific formulations should be evaluated for their ingredients.

Breast-feeding

Stearyl can be used while breastfeeding, but it's recommended to consult a healthcare provider for specific concerns regarding topical applications.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Cream
• Ointment
• Lotion

Pregnancy

No specific data available, consult a healthcare professional.

Breast-feeding

No specific data available, consult a healthcare professional.

Storage

Store in a cool, dry place away from light.

Mechanism of action

Atazanavir selectively inhibits the virus-specific processing of viral Gag and Gag-Pol polyproteins in HIV-1 infected cells by binding to the active site of HIV-1 protease, thus preventing the formation of mature virions. Atazanavir is not active against HIV-2. Atazanavir is an azapeptide HIV-1 protease inhibitor. The compound selectively inhibits the virus-specific processing of viral Gag and Gag-Pol polyproteins in HIV-1 infected cells, thus preventing formation of mature virions. BMS-232632 is an azapeptide human immunodeficiency virus type 1 (HIV-1) protease (Prt) inhibitor that exhibits potent anti-HIV activity with a 50% effective concentration (EC(50)) of 2.6 to 5.3 nM and an EC(90) of 9 to 15 nM in cell culture. Proof-of-principle studies indicate that BMS-232632 blocks the cleavage of viral precursor proteins in HIV-infected cells, proving that it functions as an HIV Prt inhibitor. Comparative studies showed that BMS-232632 is generally more potent than the five currently approved HIV-1 Prt inhibitors. Furthermore, BMS-232632 is highly selective for HIV-1 Prt and exhibits cytotoxicity only at concentrations 6,500- to 23, 000-fold higher than that required for anti-HIV activity. To assess the potential of this inhibitor when used in combination with other antiretrovirals, BMS-232632 was evaluated for anti-HIV activity in two-drug combination studies. Combinations of BMS-232632 with either stavudine, didanosine, lamivudine, zidovudine, nelfinavir, indinavir, ritonavir, saquinavir, or amprenavir in HIV-infected peripheral blood mononuclear cells yielded additive to moderately synergistic antiviral effects. Importantly, combinations of drug pairs did not result in antagonistic anti-HIV activity or enhanced cytotoxic effects at the highest concentrations used for antiviral evaluation. Our results suggest that BMS-232632 may be an effective HIV-1 inhibitor that may be utilized in a variety of different drug combinations.

Pharmacodynamics

Atazanavir (ATV) is an azapeptide HIV-1 protease inhibitor (PI) with activity against Human Immunodeficiency Virus Type 1 (HIV-1). HIV-1 protease is an enzyme required for the proteolytic cleavage of the viral polyprotein precursors into the individual functional proteins found in infectious HIV-1. Atazanavir binds to the protease active site and inhibits the activity of the enzyme. This inhibition prevents cleavage of the viral polyproteins resulting in the formation of immature non-infectious viral particles. Protease inhibitors are almost always used in combination with at least two other anti-HIV drugs. Atazanivir is pharmacologically related but structurally different from other protease inhibitors and other currently available antiretrovirals. Atazanavir exhibits anti-HIV-1 activity with a mean 50% effective concentration (EC50) in the absence of human serum of 2 to 5 nM against a variety of laboratory and clinical HIV-1 isolates grown in peripheral blood mononuclear cells, macrophages, CEM-SS cells, and MT-2 cells. Atazanavir has activity against HIV-1 Group M subtype viruses A, B, C, D, AE, AG, F, G, and J isolates in cell culture. Atazanavir has variable activity against HIV-2 isolates (1.9-32 nM), with EC₅₀ values above the EC₅₀ values of failure isolates. Two-drug combination antiviral activity studies with atazanavir showed no antagonism in cell culture with PIs (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir, and saquinavir), NNRTIs (delavirdine, efavirenz, and nevirapine), NRTIs (abacavir, didanosine, emtricitabine, lamivudine, stavudine, tenofovir DF, and zidovudine), the HIV-1 fusion inhibitor enfuvirtide, and two compounds used in the treatment of viral hepatitis, adefovir and ribavirin, without enhanced cytotoxicity. HIV-1 isolates with a decreased susceptibility to atazanavir have been selected in cell culture and obtained from patients treated with atazanavir or atazanavir with ritonavir. HIV-1 isolates with 93- to 183-fold reduced susceptibility to atazanavir from three different viral strains were selected in cell culture for 5 months. The substitutions in these HIV-1 viruses that contributed to atazanavir resistance include I50L, N88S, I84V, A71V, and M46I. Changes were also observed at the protease cleavage sites following drug selection. Recombinant viruses containing the I50L substitution without other major PI substitutions were growth impaired and displayed increased susceptibility in cell culture to other PIs (amprenavir, indinavir, lopinavir, nelfinavir, ritonavir, and saquinavir). The I50L and I50V substitutions yielded selective resistance to atazanavir and amprenavir, respectively, and did not appear to be cross-resistant. Concentration- and dose-dependent prolongation of the PR interval in the electrocardiogram has been observed in healthy subjects receiving atazanavir. In placebo-controlled Study AI424-076, the mean (±SD) maximum change in PR interval from the predose value was 24 (±15) msec following oral dosing with 400 mg of atazanavir (n=65) compared to 13 (±11) msec following dosing with placebo (n=67). The PR interval prolongations in this study were asymptomatic. There is limited information on the potential for a pharmacodynamic interaction in humans between atazanavir and other drugs that prolong the PR interval of the electrocardiogram. Electrocardiographic effects of atazanavir were determined in a clinical pharmacology study of 72 healthy subjects. Oral doses of 400 mg (maximum recommended dosage) and 800 mg (twice the maximum recommended dosage) were compared with placebo; there was no concentration-dependent effect of atazanavir on the QTc interval (using Fridericia’s correction). In 1793 subjects with HIV-1 infection, receiving antiretroviral regimens, QTc prolongation was comparable in the atazanavir and comparator regimens. No atazanavir-treated healthy subject or subject with HIV-1 infection in clinical trials had a QTc interval >500 mse

Mechanism of action

Ritonavic inhibits the HIV viral proteinase enzyme that normally cleaves the structural and replicative proteins that arise from major HIV genes, such as *gag* and *pol*. *Gag* encodes proteins involved in the core and the nucleocapsid, while *pol* encodes the the HIV reverse transcriptase, ribonuclease H, integrase, and protease. The *pol*-encoded proteins are initially translated in the form of a larger precursoe polypeptide, *gag-pol*, and needs to be cleaved by HIV protease to form other complement proteins. Ritonavir prevents the cleavage of the *gag-pol* polyprotein, which results in noninfectious, immature viral particles. Ritonavir is a potent inhibitor of cytochrome P450 CYP3A4 isoenzyme present both in the intestinal tract and liver. It is a type II ligand that perfectly fits into the CYP3A4 active site cavity and irreversibly binds to the heme iron via the thiazole nitrogen, which decreases the redox potential of the protein and precludes its reduction with the redox partner, cytochrome P450 reductase. Ritonavir may also play a role in limiting cellular transport and efflux of other protease inhibitors via the P-glycoprotein and MRP efflux channels. Unlike nucleoside antiretroviral agents, the antiviral activity of ritonavir does not depend on intracellular conversion to an active metabolite. Ritonavir and other HIV protease inhibitors (e.g., amprenavir, indinavir, lopinavir, nelfinavir, saquinavir) act at a different stage of the HIV replication cycle than nucleoside and nonnucleoside reverse transcriptase inhibitors, and results of in vitro studies indicate that the antiretroviral effects of HIV protease inhibitors and some nucleoside or nonnucleoside antiretroviral agents may be additive or synergistic. Ritonavir is a selective, competitive, reversible inhibitor of HIV protease. HIV protease, an aspartic endopeptidase that functions as a homodimer, plays an essential role in the HIV replication cycle and the formation of infectious virus. During HIV replication, HIV protease cleaves viral polypeptide products of the gag and gag-pol genes (i.e., p55 and p160) to form structural proteins of the virion core (i.e., p17, p24, p9, and p7) and essential viral enzymes (i.e., reverse transcriptase, integrase, and protease). By interfering with the formation of these essential proteins and enzymes, ritonavir blocks maturation of the virus and causes formation of nonfunctional, immature, noninfectious virions. Ritonavir is active in both acutely and chronically infected cells since it targets the HIV replication cycle after translation and before assembly. Thus, the drug is active in chronically infected cells (e.g., monocytes and macrophages) that generally are not affected by nucleoside reverse transcriptase inhibitors (e.g., didanosine, lamivudine, stavudine, zalcitabine, zidovudine). Ritonavir does not affect early stages of the HIV replication cycle; however, the drug interferes with production of infectious HIV and limits further infectious spread of the virus. While the complete mechanisms of antiviral activity of ritonavir have not been fully elucidated, ritonavir apparently inhibits replication of retroviruses, including human immunodeficiency virus type 1 (HIV-1) and 2 (HIV-2), by interfering with HIV protease. The drug, therefore, exerts a virustatic effect against retroviruses by acting as an HIV protease inhibitor.

Pharmacodynamics

Ritonavir is a protease inhibitor with activity against Human Immunodeficiency Virus Type 1 (HIV-1). Protease inhibitors block the part of HIV called protease. HIV-1 protease is an enzyme required for the proteolytic cleavage of the viral polyprotein precursors into the individual functional proteins found in infectious HIV-1. Ritonavir binds to the protease active site and inhibits the activity of the enzyme. This inhibition prevents cleavage of the viral polyproteins resulting in the formation of immature non-infectious viral particles. Protease inhibitors are almost always used in combination with at least two other anti-HIV drugs. Modern protease inhibitors require the use of low-dose ritonavir to boost pharmacokinetic exposure through inhibition of metabolism via the cytochrome P450 3A4 enzyme pathway.