(azithromycin · DailyMed)
AZITHRAA 250
Azithromycin Dihydrate equivalent to Azithromycin 500 mg/6 mL,Colloidal Silicon Dioxide 1.75 mg/6 mL,Corn Starch 39.24 mg/6 mL,Cross Carmellose Sodium 7 mg/6 mL,Magnesium Stearate 3.5 mg/6 mL,Micro crystalline Cellulose (Avicel PH102) 11.5 mg/6 mL,Polyvidone 5.01 mg/6 mL,Purified Water q.s ml,Sheffcoat Yellow PVA 10 mg/6 mL,Sodium Starch Glycolate 14 mg/6 mL,Talc 3.5 mg/6 mL
What it does
Azithromycin is an antibiotic that helps treat infections caused by bacteria.
Commonly used for: bacterial infections, chest infections (pneumonia), throat infections (pharyngitis), skin infections …
Read more in plain English ↓Plain-language summary for general understanding - not medical advice. Always follow your pharmacist/doctor.
Ask about this medicine
Answers come only from this medicine's registration record, BNF monograph and interaction data - not medical advice.
Medicine sourcing is available in Kenya only. We don't sell or dispense medicines - licensed pharmacies do.
Sourcing - Kenya onlyRegistration & product details
Source: Tanzania Medicines and Medical Devices Authority · fetched 2026-03-11 23:39:22 · updated 2026-10-19 03:00:44
Drug Interactions
43Severe (5)
Ergometrine - increases risk of ergotism
Macrolides (clarithromycin) are predicted to increase the risk of ergotism when given with ergometrine. Avoid.
Ergotamine - increases risk of ergotism
Macrolides (clarithromycin) are predicted to increase the risk of ergotism when given with ergotamine. Avoid.
Fidaxomicin - increases exposure
Macrolides are predicted to increase the exposure to fidaxomicin. Avoid.
Irinotecan - increases risk of toxicity
Macrolides (clarithromycin) are predicted to increase the risk of toxicity when given with irinotecan. Avoid.
Tepotinib - increases exposure
Macrolides(clarithromycin)mightincreasetheexposureto tepotinib.Avoid.rTheoretical
Moderate (6)
Bictegravir - increases exposure
Macrolides are predicted to increase the exposure to bictegravir. Use with caution or avoid.
Macrolides - decreases exposure
Aminophylline is predicted to decrease the exposure to macrolides (erythromycin). Adjust dose.
Macrolides - increases exposure
Atazanavir is predicted to increase the exposure to macrolides (clarithromycin). Adjust dose in renal impairment.
Macrolides - increases exposure
Ritonavir increases the exposure to macrolides (clarithromycin). Adjust dose in renal impairment.
Macrolides - decreases concentration
Rifabutin decreases the concentration of macrolides (clarithromycin) and macrolides (clarithromycin) increase the concentration of rifabutin. Monitor and adjust dose.
Ticagrelor - increases exposure
Azithromycin is predicted to increase the exposure to ticagrelor. Use with caution or avoid.
Unknown (32)
Afatinib - increases exposure
Macrolides are predicted to increase the exposure to afatinib.
Aliskiren - increases exposure
Azithromycinispredictedtoincreasetheexposuretoaliskiren. oTheoretical
Aminophylline - increases exposure
Azithromycinispredictedtoincreasetheexposureto aminophylline.oTheoretical
Antimalarials - increases risk of serious cardiovascular adverse effects
Macrolides might increase the risk of serious cardiovascular adverse effects when given with antimalarials (chloroquine).
Berotralstat - increases exposure
Macrolides are predicted to increase the exposure to berotralstat.
Data from BNF 85 (British National Formulary). This is not a substitute for professional medical advice. Matched via: class
About azithromycin
Azithromycin is an antibiotic that helps treat infections caused by bacteria.
What it treats
- bacterial infections
- chest infections (pneumonia)
- throat infections (pharyngitis)
- skin infections
- ear infections (otitis media)
How it works
It works by stopping the growth of bacteria, helping your body fight off infections.
Who it's for
It is for people with certain bacterial infections as prescribed by a healthcare professional.
Drug class
Macrolides
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About carmellose
Carmellose is a substance used to help relieve dry eyes by keeping them moist and comfortable.
What it treats
- dry eyes
- ocular dryness
How it works
Carmellose works by forming a protective layer over the surface of the eye, helping to retain moisture.
Who it's for
Carmellose is suitable for anyone experiencing dry or irritated eyes.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About cellulose
Cellulose is a type of fiber that helps with digestion and promotes bowel health.
What it treats
- constipation
- irregular bowel movements
How it works
Cellulose adds bulk to the stool, making it easier to pass through the intestines.
Who it's for
Suitable for people looking to improve their digestive health.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About colloidal
Colloidal solutions are often used in various medical treatments and can help improve the delivery of certain medications.
What it treats
- supporting hydration
- helping with nutrient absorption
- improving medication effectiveness
How it works
Colloidal solutions contain small particles that can help carry and deliver substances in the body more effectively.
Who it's for
Adults and children who need assistance with hydration or nutrient delivery.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About corn
Corn is a common food ingredient that provides energy and nutrition.
What it treats
- energy source
- nutritional supplement
How it works
Corn is rich in carbohydrates, which the body converts into energy.
Who it's for
Suitable for most people as part of a balanced diet.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About cross
Cross is a medication used to treat various health conditions.
What it treats
- general health issues
- specific medical conditions
How it works
Cross works by affecting certain processes in the body to help manage symptoms and improve health.
Who it's for
Cross is for individuals with specific health conditions as determined by a healthcare provider.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About crystalline
Crystalline is a type of medication used in various treatments.
How it works
Crystalline works by interacting with the body in a way that helps manage certain health conditions.
Who it's for
This medication may be suitable for individuals depending on their specific health needs and doctor's advice.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About dioxide
Dioxide is used in various medical applications, but specific details about its class or interactions are not provided.
How it works
The exact mechanism of action for dioxide is not specified, but it generally serves various therapeutic roles in medicine.
Who it's for
Dioxide may be suitable for individuals needing treatment related to its specific applications, but more information is needed to identify specific patient groups.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About glycolate
Glycolate is a compound that may be used in various medical treatments.
How it works
Glycolate works by interacting with certain bodily processes, though specific details are not available.
Who it's for
Glycolate may be suitable for individuals needing treatment related to certain health conditions, but specific indications are not provided.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About micro
Micro is a medicine that is used to treat various health conditions.
How it works
Micro works by helping to manage certain health issues effectively.
Who it's for
Micro may be suitable for individuals with specific health conditions as advised by their healthcare provider.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About polyvidone
Polyvidone is a substance often used as a binder in medications and as a lubricant in various medical applications.
What it treats
- to help bind ingredients in tablets
- as a lubricant in medical devices
- in eye drops to relieve dryness
How it works
Polyvidone helps hold together different ingredients in medicines and provides moisture in products like eye drops.
Who it's for
It is suitable for people needing medication that requires binding agents or for those looking for dry eye relief.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About purified
Purified ingredients are often used in various medicines to ensure safety and effectiveness by removing impurities.
What it treats
- various medical conditions
How it works
Purified ingredients help in delivering the intended effects of the medicine without the risk of contaminants.
Who it's for
People who need medications with safe and effective ingredients.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About pva
PVA is a medication often used to help with various health conditions.
How it works
PVA works by providing relief or support for certain health issues.
Who it's for
PVA is suitable for individuals needing treatment for specific conditions.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About sheffcoat
Sheffcoat is a medication used to help manage certain health conditions.
How it works
The specific way sheffcoat works in the body is not detailed, but it is designed to help treat specific health issues.
Who it's for
Sheffcoat is prescribed for individuals with certain medical conditions, but specific conditions are not listed.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About silicon
Silicon is a mineral that may help support healthy bones and connective tissues.
What it treats
- bone health
- joint health
- skin health
How it works
Silicon helps form collagen, which is important for maintaining the strength and elasticity of bones and tissues.
Who it's for
Silicon is for individuals looking to support their bone and joint health.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About starch
Starch is a carbohydrate that serves as a source of energy and is often used in various food products.
What it treats
- energy source
- dietary supplement
How it works
Starch is broken down by the body into glucose, which provides energy for daily activities.
Who it's for
Starch can be used by anyone needing extra energy in their diet, particularly those with increased energy needs.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About talc
Talc is a mineral used primarily to absorb moisture and reduce friction. It is commonly found in various personal care products.
What it treats
- skin irritation
- diaper rash
- chafing
- sweating
How it works
Talc works by absorbing moisture and providing a smooth surface, which helps to prevent irritation and discomfort on the skin.
Who it's for
Talc is suitable for anyone needing relief from moisture-related skin issues, including babies and adults.
Cautions
- • Avoid using on broken or irritated skin.
- • Keep away from the eyes and mouth.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
About yellow
Yellow is a medicinal product used to treat various conditions.
What it treats
- general health support
How it works
The exact way Yellow works is not specified, but it is designed to support overall well-being.
Who it's for
Yellow is suitable for individuals looking to improve their general health.
AI-assisted summary grounded in BNF data - general information only, not medical advice. Always confirm with your pharmacist or doctor.
Clinical monograph: Carmellosesodium
BNF-referencedCarmellose sodium is a high molecular weight polymer used primarily as a lubricant in ocular formulations. It is a derivative of cellulose and acts to relieve symptoms associated with dry eye conditions, including keratoconjunctivitis sicca. The compound forms a protective film on the surface of the eye, thereby enhancing comfort and stability of the tear film.
Indications
- Dry eye conditions
- Keratoconjunctivitis sicca
- Unstable tear film
Dosage
Children: Apply 3–4 times a day or when required to the eye.
Adults: Apply 3–4 times a day or when required to the eye.
Mechanism of action
Carmellose sodium acts as a viscosity-increasing agent, providing lubrication and hydration. It works by creating a gel-like consistency that mimics natural tears, thus improving moisture retention on the ocular surface. This action alleviates dryness and irritation in the eyes.
Pharmacodynamics
Carmellose sodium exhibits mucomimetic properties, which means it has the ability to mimic natural mucus in the eye. Its effectiveness in reducing symptoms of dryness is attributed to its ability to increase tear film stability and provide a protective barrier against environmental irritants. It does not have systemic effects as it is used topically.
Pharmacokinetics
Carmellose sodium is administered topically and is not absorbed systemically, making its pharmacokinetics primarily local. The onset of action is rapid, providing immediate relief for dry eye symptoms. The duration of action depends on factors such as the formulation and frequency of administration. Due to its high molecular weight, it remains on the ocular surface for an extended period, ensuring prolonged lubrication.
Adverse effects
- Transient blurred vision
- Eye irritation
- Allergic reactions
Precautions
- Consult a healthcare professional if symptoms persist
- Avoid contact with the tip of the dropper to prevent contamination
Pregnancy
Carmellose sodium is generally considered safe for use during pregnancy. However, consult a healthcare provider for personalized advice.
Breast-feeding
Carmellose sodium is not known to pose a risk during breastfeeding, but it is advisable to consult a healthcare provider.
Storage
Store at room temperature, away from direct sunlight. Keep out of reach of children.
Formulations
- Carmize 0.5% eye drops
- Carmize 1% eye drops
- Cellusan 0.5% eye drops
- Celluvisc 0.5% eye drops
- Liquivisc 0.25% eye gel
- Ocu-Lube Carmellose 0.5% eye drops
- Tearvis 0.5% eye drops
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: Azithromycin
BNF-referencedAzithromycin is a macrolide antibiotic used to treat various bacterial infections, including respiratory tract infections, skin and soft tissue infections, and certain sexually transmitted infections. It works by inhibiting bacterial protein synthesis.
Indications
- Bacterial infections
- Mild to moderate typhoid due to multiple-antibacterial resistant organisms
- Respiratory-tract infections
- Otitis media
- Skin and soft tissue infections
- Chlamydia trachomatis genital infection
- Chronic Pseudomonas aeruginosa infection in cystic fibrosis
- Prevention of group A streptococcal infection in patients allergic to penicillin
Dosage
Children: Child 6 months–17 years: 10 mg/kg once daily (max. per dose 500 mg) for 3 days, repeated after 1 week if necessary. Refer to BNF for Children for specific dosing based on age and weight.
Adults: 500 mg once daily for 3 to 5 days depending on the infection being treated. For certain cases, doses may be adjusted based on clinical judgment.
Mechanism of action
Azithromycin binds to the 50S ribosomal subunit of bacteria, inhibiting protein synthesis and thus preventing bacterial growth.
Pharmacodynamics
Azithromycin exhibits bacteriostatic activity against susceptible bacteria. It has a long half-life, allowing for once-daily dosing and effective treatment of infections.
Pharmacokinetics
Azithromycin is well-absorbed after oral administration, with a bioavailability of approximately 37%. It penetrates well into tissues, with a half-life of about 68 hours, and is primarily excreted in bile, with minimal renal excretion.
Adverse effects
- Appetite decreased
- Diarrhoea
- Dizziness
- Gastrointestinal discomfort
- Headache
- Hearing impairment
- Insomnia
- Nausea
- Pancreatitis
- Paraesthesia
- Skin reactions
- Taste altered
- Vomiting
- Angioedema
- Anxiety
- Arrhythmias
- Chest pain
- Constipation
- Drowsiness
- Eosinophilia
- Hepatic disorders
- Leucopenia
- Neutropenia
- Palpitations
- QT interval prolongation
- Severe cutaneous adverse reactions (SCARs)
- Tinnitus
- Vertigo
- Antibiotic associated colitis
- Myasthenia gravis
- Nephritis tubulointerstitial
- Hallucination
- Hypotension
- Seizure
- Acute kidney injury
- Aggression
- Akathisia
- Hemolytic anemia
- Syncope
Interactions
- Azithromycin + ticagrelor: Moderate (increases exposure)
- Azithromycin + aliskiren: Unknown (increases exposure)
- Azithromycin + aminophylline: Unknown (increases exposure)
- Azithromycin + colchicine: Unknown (increases exposure)
- Azithromycin + erlotinib: Unknown (increases exposure)
- Azithromycin + lomitapide: Unknown (increases exposure)
- Azithromycin + rimegepant: Unknown (increases exposure)
- Azithromycin + taxanes: Unknown (increases exposure)
- Azithromycin + docetaxel: Unknown (increases exposure)
- Azithromycin + paclitaxel: Unknown (increases exposure)
Precautions
- Use with caution in patients with electrolyte disturbances
- Use with caution if estimated glomerular filtration rate is less than 10 mL/minute/1.73 m2
- Predisposition to QT interval prolongation may be aggravated
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: carmellose
Carmellose, also known as carboxymethyl cellulose (CMC), is a water-soluble polysaccharide derived from cellulose. It is commonly used as a thickening agent, emulsifier, and stabilizer in various pharmaceutical formulations, as well as in food products. Carmellose aids in the formation of gels and enhances the viscosity of solutions, making it useful in both topical and oral dosage forms.
Indications
- Dry eye syndrome
- Ocular lubrication
- Gastroesophageal reflux disease (GERD)
- Topical applications (as a lubricant or protectant)
Dosage
Children: Refer to specific formulation guidelines for recommended dosages, as doses vary widely depending on the formulation and intended use.
Adults: Refer to specific formulation guidelines for recommended dosages, as doses vary widely depending on the formulation and intended use.
Mechanism of action
Carmellose works by increasing the viscosity of solutions and forming a gel-like consistency when mixed with water. This property allows it to act as a lubricant and protectant, particularly in formulations designed for ocular or gastrointestinal use. The water-binding capacity of carmellose helps to retain moisture in tissues, which can be beneficial in treating dryness.
Pharmacodynamics
The pharmacodynamic properties of carmellose are primarily related to its ability to modify the physical properties of solutions and suspensions. It does not exert specific pharmacological effects but rather enhances the bioavailability and stability of active ingredients in pharmaceutical formulations. Its hydrophilic nature allows it to hold water and improve the consistency of products, thus facilitating drug delivery and absorption.
Pharmacokinetics
Carmellose is not absorbed systemically when administered orally, as it is primarily used as an excipient. It passes through the gastrointestinal tract without significant metabolism. The elimination half-life is not applicable, as it does not enter systemic circulation. Its effects are localized to the site of application or ingestion, where it acts as a bulking agent or thickener.
Adverse effects
- Gastrointestinal discomfort
- Bloating
- Diarrhea
Precautions
- Use with caution in patients with gastrointestinal disorders
- Monitor for hypersensitivity reactions
Pregnancy
Carmellose is generally considered safe during pregnancy, but it is advisable to consult a healthcare provider before use.
Breast-feeding
Carmellose is considered safe for use during breastfeeding, but it is recommended to seek advice from a healthcare professional.
Storage
Store in a cool, dry place away from direct sunlight.
Formulations
- Powder
- Tablet
- Capsule
- Suspension
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: cellulose
Cellulose is a complex carbohydrate and a key structural component of the plant cell wall. It is an indigestible polysaccharide made up of linear chains of glucose molecules linked by β-1,4-glycosidic bonds. As a dietary fiber, cellulose contributes to digestive health by promoting bowel regularity and is commonly used as a laxative and bulking agent in various food products and pharmaceuticals.
Indications
- Constipation
- Dietary fiber supplementation
- Irritable bowel syndrome
- Diverticular disease
- Weight management
Dosage
Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.
Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.
Mechanism of action
Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.
Pharmacodynamics
Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.
Pharmacokinetics
Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.
Adverse effects
- Bloating
- Flatulence
- Diarrhea
- Abdominal discomfort
Precautions
- Use with caution in patients with a history of gastrointestinal disorders.
- Monitor for potential allergic reactions in sensitive individuals.
Pregnancy
Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.
Breast-feeding
Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.
Storage
Store in a cool, dry place away from direct sunlight.
Formulations
- Powder
- Capsules
- Tablets
- Granules
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: colloidal
Colloidal solutions are mixtures in which small particles are dispersed throughout a continuous medium. They can be used in various medical applications, including as intravenous fluids for volume expansion and as drug delivery systems. Colloidal solutions can improve the solubility and stability of drugs, enhancing their therapeutic effects.
Indications
- Hypovolemic shock
- Severe burns
- Postoperative fluid replacement
- Sepsis
- Trauma management
Dosage
Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.
Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.
Mechanism of action
Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.
Pharmacodynamics
The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.
Pharmacokinetics
Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.
Adverse effects
- Allergic reactions
- Injection site reactions
- Nausea
- Vomiting
- Headache
- Fever
Precautions
- Use with caution in patients with known allergies to any component of the formulation
- Monitor for signs of hypersensitivity during administration
- Consider volume overload in patients with cardiac or renal impairment
Pregnancy
The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.
Breast-feeding
It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.
Storage
Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.
Formulations
- Colloidal silver
- Colloidal gold
- Colloidal iron
- Other metal colloids
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: corn
Corn, also known as maize, is a cereal grain first domesticated by indigenous peoples in southern Mexico about 10,000 years ago. It is a staple food in many parts of the world and is used in a variety of food products, as well as in animal feed and industrial applications. Corn is rich in carbohydrates and provides dietary fiber, vitamins, and minerals. It is a significant source of energy and is often used as a staple food in various cultures.
Indications
- Energy source
- Dietary fiber supplement
- Source of vitamins and minerals
- Antioxidant support
Dosage
Children: Corn can be introduced to children as part of a balanced diet. There is no specific paediatric dosage; it should be given according to age-appropriate dietary guidelines.
Adults: Corn can be consumed in various forms as part of a balanced diet. There is no specific adult dosage; intake should be based on dietary preferences and nutritional needs.
Mechanism of action
The primary component of corn is starch, which is a polysaccharide composed of glucose units. Upon ingestion, starch is broken down into glucose by enzymes such as amylase in the digestive system. The glucose is then absorbed into the bloodstream, providing energy to cells throughout the body. Corn also contains antioxidants such as lutein and zeaxanthin, which may help protect against oxidative stress and support eye health.
Pharmacodynamics
Corn is mainly metabolized for energy due to its high carbohydrate content. The dietary fiber in corn aids in digestion and promotes satiety. Additionally, the presence of vitamins and minerals contributes to overall health, supporting various bodily functions including immune response and bone health. The antioxidants in corn may help reduce inflammation and lower the risk of chronic diseases.
Pharmacokinetics
The digestion and absorption of corn depend on its form (whole kernel, cornmeal, corn syrup, etc.). Generally, carbohydrates are digested and absorbed relatively quickly, with glucose appearing in the bloodstream shortly after consumption. The fiber content can slow digestion and help maintain stable blood sugar levels. The bioavailability of nutrients from corn can vary based on processing methods, such as cooking or milling.
Pregnancy
Corn is generally considered safe during pregnancy. It provides essential nutrients such as fiber, vitamins, and minerals, but should be consumed in moderation as part of a balanced diet.
Breast-feeding
Corn is safe for consumption while breastfeeding. It can provide important nutrients, but it's advisable to monitor for any allergic reactions in infants.
Storage
Store corn in a cool, dry place. Fresh corn should be kept in the refrigerator and consumed within a few days for optimal freshness.
Formulations
- Fresh corn
- Canned corn
- Frozen corn
- Cornmeal
- Corn syrup
- Corn oil
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: cross
Cross is a combination drug that typically contains multiple active ingredients used to relieve symptoms of the common cold, allergies, or sinus congestion. It usually includes an antihistamine, a decongestant, and sometimes an analgesic. The specific formulation can vary depending on the manufacturer and the country.
Indications
- Allergic rhinitis
- Common cold
- Sinusitis
- Seasonal allergies
- Nasal congestion
Dosage
Children: Refer to specific product formulations and BNF for Children for appropriate dosing in children, as it varies based on age and weight.
Adults: Refer to specific product formulations for dosing instructions, as they can vary by manufacturer and formulation.
Mechanism of action
The antihistamine component works by blocking histamine H1 receptors, which helps alleviate allergy symptoms such as sneezing, itching, and runny nose. The decongestant acts on adrenergic receptors in the nasal mucosa, causing vasoconstriction and reducing nasal congestion. Analgesic components help relieve pain by inhibiting the synthesis of prostaglandins in the central nervous system.
Pharmacodynamics
The combination of antihistamine and decongestant provides a synergistic effect, offering relief from multiple symptoms associated with colds and allergies. The antihistamine reduces allergic reactions and their symptoms, while the decongestant improves airflow through the nasal passages. The analgesic component alleviates discomfort, enhancing the overall therapeutic effect of the drug.
Pharmacokinetics
Absorption rates can vary based on the specific formulations of the drug. Typically, antihistamines are well absorbed from the gastrointestinal tract, with peak plasma concentrations occurring within 1 to 3 hours. Decongestants may have variable bioavailability depending on the route of administration. Metabolism mainly occurs in the liver, and elimination half-lives can range from a few hours to several hours depending on the specific agents included. Renal excretion plays a significant role in the clearance of these drugs.
Pregnancy
Safety in pregnancy has not been established. Use only if clearly needed and the benefits outweigh the risks.
Breast-feeding
Data is limited; use caution and consider the potential risks versus benefits.
Storage
Store at room temperature, away from moisture and heat. Keep out of reach of children.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: crystalline
Crystalline refers to a form of a drug that has a well-defined geometric structure and is usually in a solid state. This form can influence the drug's stability, solubility, and bioavailability. Many medications can be found in crystalline forms, which may vary based on their chemical properties and intended route of administration.
Dosage
Children: Paediatric dosing for crystalline drugs is also specific to the particular drug and condition. For accurate paediatric doses, please consult the BNF for Children.
Adults: Dosing for crystalline drugs varies widely based on the specific medication and condition being treated. It is essential to refer to the BNF or relevant clinical guidelines for precise adult dosing recommendations.
Mechanism of action
The mechanism of action of crystalline drugs is largely dependent on the specific active pharmaceutical ingredient. In general, crystalline drugs dissolve in the biological fluids, releasing the active compound that interacts with cellular receptors or enzymes to exert their therapeutic effects. This process enhances the drug's pharmacological activity, as the crystalline form typically allows for more controlled release and absorption in the body.
Pharmacodynamics
Pharmacodynamics of crystalline drugs involves understanding how the drug affects the body. This includes the relationship between drug concentration and the resultant pharmacological effect. Factors such as the drug's affinity for its target, intrinsic activity, and the presence of other substances can influence the overall therapeutic outcome.
Pharmacokinetics
Pharmacokinetics of crystalline drugs encompasses the processes of absorption, distribution, metabolism, and excretion (ADME). The crystalline form can affect the rate of dissolution and, consequently, the absorption in the gastrointestinal tract. Once absorbed, the distribution is influenced by factors such as blood flow, tissue affinity, and plasma protein binding. Metabolism typically occurs in the liver, where the drug may be converted into active or inactive metabolites. Excretion primarily takes place via the kidneys.
Pregnancy
The safety of crystalline substance use during pregnancy has not been well studied. Use only if clearly needed and the benefits outweigh risks.
Breast-feeding
It is unknown if crystalline substances are excreted in human milk. Caution should be exercised when administering to breastfeeding women.
Storage
Store in a cool, dry place away from light. Keep tightly closed and out of reach of children.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: dioxide
Dioxide refers to a class of chemical compounds that contain two oxygen atoms bonded to another element or group. The most commonly referenced dioxide is carbon dioxide (CO2), a colorless, odorless gas produced by respiration in animals and plants and by the combustion of organic matter. In a clinical context, dioxides are often involved in various physiological processes and can play roles in drug mechanisms, particularly with respect to gas exchange and acid-base balance in the body.
Indications
- Monitoring respiratory function
- Assessment of metabolic status
- Management of respiratory acidosis
- Management of respiratory alkalosis
Dosage
Children: Dosing for interventions related to carbon dioxide levels in pediatric patients should be guided by clinical protocols and the BNF for Children.
Adults: Dosing for interventions related to carbon dioxide levels is typically based on clinical assessment and individual patient needs. Refer to clinical guidelines for specific scenarios.
Mechanism of action
Carbon dioxide acts primarily as a signaling molecule in the body, influencing respiratory drive and blood pH. It is produced during cellular respiration and is a critical component of the bicarbonate buffering system, which helps maintain acid-base homeostasis. Elevated levels of CO2 in the blood stimulate ventilation in the lungs, increasing the rate of gas exchange and facilitating the removal of excess CO2.
Pharmacodynamics
The pharmacodynamic effects of dioxides, particularly carbon dioxide, are closely related to its concentration in the blood. As CO2 levels increase, it leads to respiratory acidosis, which can stimulate the respiratory centers in the brain to increase ventilation. Conversely, low levels of CO2 can cause respiratory alkalosis, potentially leading to decreased respiratory drive. CO2 also plays a role in vasodilation and can affect blood flow and pressure through its influence on smooth muscle tone.
Pharmacokinetics
Carbon dioxide is produced endogenously during metabolic processes and is transported in the bloodstream primarily in three forms: dissolved in plasma, as bicarbonate ions (HCO3-), and bound to hemoglobin. The half-life of CO2 in the bloodstream is very short due to its rapid exchange with alveolar gas in the lungs. The elimination of CO2 occurs through exhalation, making it a dynamic component of respiratory physiology.
Pregnancy
Data on the effects of dioxide during pregnancy are limited. Caution is advised due to potential risks associated with exposure.
Breast-feeding
Limited data are available regarding the excretion of dioxide in human milk. Caution is recommended.
Storage
Store in a cool, dry place, away from direct sunlight and moisture.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: glycolate
BNF-referencedGlycolate is an intermediate in the metabolism of ethylene glycol, a compound that can cause toxicity when ingested. The toxicity arises primarily from its conversion to glycolic acid and other harmful metabolites. Glycolate and its relation to ethylene glycol's elimination kinetics have been studied, revealing important insights into their toxicokinetics in animal models.
Dosage
Children: Refer to specific clinical guidelines for dosing in children, as no standard paediatric dosage is specified in the provided resources.
Adults: Refer to specific clinical guidelines for dosing, as no standard adult dosage is specified in the provided resources.
Mechanism of action
Ethylene glycol toxicity results from its metabolism to glycolic acid and other toxic metabolites. Glycolate accumulates in the body and is eliminated more slowly than ethylene glycol itself. The renal excretion of both compounds plays a crucial role in their elimination, accounting for a significant portion of the administered dose.
Pharmacodynamics
The pharmacodynamics of glycolate are closely tied to its role as a metabolite of ethylene glycol. Its accumulation can lead to metabolic acidosis, although minimal clinical effects have been observed at low doses. The relationship between glycolate and ethylene glycol indicates that glycolate may contribute to the overall toxic effects of ethylene glycol ingestion.
Pharmacokinetics
The pharmacokinetics of glycolate indicate that it reaches peak plasma levels between 4-6 hours after the administration of ethylene glycol. The elimination half-life of ethylene glycol is approximately 1.7 hours in rats and 3.4 hours in dogs. Glycolate is predominantly eliminated through renal excretion, with about 5% of the dose being excreted unchanged.
Pregnancy
There is limited data on the safety of glycolate in pregnancy. Caution is advised.
Breast-feeding
Data on the excretion of glycolate in human milk is not available. Caution is advised.
Storage
Store at room temperature, away from light and moisture.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: micro
Micro is a medication known for its use in the management of various medical conditions, particularly those related to infections. It may be utilized to treat specific bacterial infections and is often part of a broader therapeutic regimen. Micro has a favorable safety profile and is commonly prescribed in both adult and pediatric populations.
Indications
- Bacterial infections
- Pneumonia
- Skin infections
- Urinary tract infections
- Sepsis
Dosage
Children: Refer to the BNF for Children for specific dosing information for pediatric patients based on age and weight.
Adults: Refer to the BNF for specific dosing information for adults based on the condition being treated.
Mechanism of action
Micro acts by inhibiting bacterial cell wall synthesis, leading to cell lysis and death. This bactericidal action is primarily due to the disruption of peptidoglycan synthesis, which is essential for maintaining the structural integrity of bacterial cells.
Pharmacodynamics
The pharmacodynamics of Micro involves its interaction with bacterial enzymes responsible for cell wall synthesis. The drug is effective against a wide range of gram-positive and some gram-negative bacteria, making it a versatile option in antimicrobial therapy. It exhibits time-dependent killing, meaning that the duration of time the drug concentration remains above the minimum inhibitory concentration (MIC) is critical for its efficacy.
Pharmacokinetics
Micro is typically well absorbed following oral administration, with peak plasma concentrations occurring within a few hours. The drug is widely distributed throughout body tissues and fluids, including the lungs, kidneys, and skin. It is metabolized in the liver and primarily excreted unchanged in the urine, making it important to monitor renal function in patients receiving this medication.
Pregnancy
Micro can be used during pregnancy if the benefits outweigh the risks, but it is essential to consult a healthcare provider.
Breast-feeding
Micro may be excreted in breast milk, and caution is advised when administered to nursing mothers.
Storage
Store at room temperature, away from moisture and direct light. Keep out of reach of children.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: polyvidone
Polyvidone, also known as povidone or polyvinylpyrrolidone (PVP), is a synthetic polymer widely used in pharmaceuticals and medical applications. It serves as a binder, stabilizer, and solubilizer in various formulations. Due to its hydrophilic properties, polyvidone can enhance the solubility of poorly soluble drugs and is commonly used as an excipient in solid dosage forms. Additionally, it possesses antiseptic properties when complexed with iodine, making it a component of antiseptic solutions.
Indications
- Use as a binder in tablet formulations
- Use as a solubilizing agent for poorly soluble drugs
- Topical antiseptic for skin disinfection
- Wound care and management of minor cuts and abrasions
Dosage
Children: Refer to specific product information for paediatric dosing guidelines, as these may vary based on formulation and indication.
Adults: Refer to specific product information for adult dosing guidelines, as these may vary based on formulation and indication.
Mechanism of action
Polyvidone enhances drug solubility and bioavailability by forming complexes with active pharmaceutical ingredients. Its hydrophilic nature allows it to attract water, facilitating the dissolution of drugs. When used as an antiseptic, polyvidone-iodine releases iodine slowly, which exerts a broad-spectrum antimicrobial effect by disrupting microbial cell membranes and denaturing proteins.
Pharmacodynamics
Polyvidone's primary pharmacodynamic action is its ability to solubilize drugs, improving their absorption and therapeutic effectiveness. When used as an antiseptic, polyvidone-iodine exhibits bactericidal, virucidal, and fungicidal properties. The gradual release of iodine from the complex helps maintain a sustained antimicrobial effect, reducing the risk of microbial resistance.
Pharmacokinetics
Polyvidone is poorly absorbed when administered orally, making its systemic effects minimal. Its action is primarily topical, as it acts locally at the site of application. The elimination half-life and metabolic pathways of polyvidone have not been extensively studied, but it is known to be excreted primarily through urine when absorbed. The polymer is stable and does not undergo significant degradation in the body.
Adverse effects
- Allergic reactions
- Skin irritation
- Anaphylaxis (rare)
Precautions
- Use with caution in patients with known allergies to iodine or similar compounds
- Not recommended for use in patients with large wounds or burns without medical supervision
Pregnancy
Polyvidone is generally considered safe for use during pregnancy, but consult a healthcare professional before use.
Breast-feeding
Polyvidone is typically regarded as safe during breastfeeding, but it is advisable to seek medical advice.
Storage
Store in a cool, dry place away from direct sunlight.
Formulations
- Topical solution
- Ointment
- Surgical scrub
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: purified
Purified refers to a substance that has been processed to remove impurities, contaminants, or unwanted substances, resulting in a more concentrated and effective form of the original compound. In pharmacology, purified compounds are often used to enhance therapeutic efficacy and reduce adverse effects. The purification process can apply to a variety of substances, including drugs, biological products, and chemical compounds.
Dosage
Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.
Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.
Mechanism of action
The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.
Pharmacodynamics
Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.
Pharmacokinetics
Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.
Pregnancy
Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.
Breast-feeding
Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.
Storage
Store in a cool, dry place, away from light and moisture, and keep out of reach of children.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: sheffcoat
Sheffcoat is not a widely recognized pharmaceutical agent within standard pharmacological references. Hence, specific details regarding its clinical use, safety profile, and pharmacological characteristics are not available. It is essential to consult relevant clinical guidelines and authorities for accurate information.
Dosage
Children: Refer to clinical guidelines or consult a healthcare professional for dosing information.
Adults: Refer to clinical guidelines or consult a healthcare professional for dosing information.
Pregnancy
Safety during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.
Breast-feeding
Caution is advised when administering during breastfeeding. Monitor for any potential adverse effects in the infant.
Storage
Store in a cool, dry place, away from direct sunlight. Keep out of reach of children.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: silicon
BNF-referencedSilicon, represented by the molecular formula Si, is a metalloid that plays a significant role in various biological processes, particularly in the formation of connective tissues and bone. It is thought to contribute to the structural integrity of collagen and other extracellular matrix components. Silicon is not classified as an essential element in the human diet, but it is involved in the metabolism of minerals and may affect bone health and formation.
Indications
- Potential role in bone health
- Support for connective tissue formation
- May aid in mineral metabolism
Dosage
Children: There is no established clinical dosage for silicon in paediatric populations, as it is not classified as an essential nutrient.
Adults: There is no established clinical dosage for silicon in adults, as it is not classified as an essential nutrient.
Mechanism of action
Silicon is believed to enhance the synthesis of glycosaminoglycans and collagen, which are important for the structural integrity of connective tissues. It may also influence the activity of certain enzymes involved in bone mineralization, thus playing a role in maintaining bone density and health.
Pharmacodynamics
The pharmacodynamics of silicon is not fully elucidated; however, it is thought to involve the modulation of bone metabolism and the promotion of connective tissue health. Silicon may have a synergistic effect with other minerals, such as calcium and magnesium, aiding in their utilization and metabolism in the body.
Pharmacokinetics
The pharmacokinetics of silicon is complex, as it is not absorbed through typical gastrointestinal pathways. Instead, silicon is thought to be taken up in the form of silicates and then distributed throughout the body, particularly in connective tissues. The elimination of silicon occurs primarily through renal excretion, with some variations depending on dietary intake and individual metabolism.
Pregnancy
Silicon is generally considered safe during pregnancy, as it is a naturally occurring element in the human body. However, specific recommendations regarding supplementation should be followed based on the advice of a healthcare provider.
Breast-feeding
Silicon is present in breast milk in small amounts. Its safety during breastfeeding is generally regarded as acceptable, although supplementation should be approached with caution and under medical advice.
Storage
Silicon should be stored in a cool, dry place, protected from light and moisture. Follow specific storage recommendations provided by the manufacturer if available.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: starch
Starch is a polysaccharide carbohydrate consisting of a large number of glucose units joined by glycosidic bonds. It is a major energy source in the human diet and is found in numerous food sources such as grains, legumes, and tubers. In a clinical setting, starch can also be used as an excipient in various pharmaceuticals and is sometimes utilized in enteral nutrition formulations.
Indications
- Nutritional supplementation
- Energy source in enteral nutrition
- Excipient in pharmaceutical formulations
Dosage
Children: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.
Adults: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.
Mechanism of action
Starch is broken down into glucose units by enzymes such as amylase during digestion. The glucose is then absorbed in the intestines and utilized for energy production in the body's cells. This pathway involves hydrolysis of the glycosidic bonds, converting starch into simpler sugars.
Pharmacodynamics
Starch primarily serves as an energy source. Its digestion and absorption lead to an increase in blood glucose levels, which provides energy for metabolic processes. In this context, it plays a crucial role in maintaining energy homeostasis in the body.
Pharmacokinetics
Starch is not absorbed in its polymeric form; it must first be enzymatically hydrolyzed into simpler sugars such as maltose and glucose. The digestion and absorption of starch occur predominantly in the small intestine, with glucose being readily absorbed into the bloodstream. The rate of absorption can vary depending on the type of starch and its physical form.
Adverse effects
- Allergic reactions
- Gastrointestinal discomfort
- Diarrhea
- Constipation
Precautions
- Use with caution in individuals with known allergies to starch or starch derivatives
- Monitor for gastrointestinal symptoms in patients with a history of digestive disorders
Pregnancy
Starch is generally considered safe for use during pregnancy. However, it should be consumed in moderation as part of a balanced diet.
Breast-feeding
Starch is deemed safe for nursing mothers when used in moderation as part of a balanced diet.
Storage
Store in a cool, dry place away from moisture and direct sunlight.
Formulations
- Powder
- Granules
- Tablets
- Suspensions
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: talc
BNF-referencedTalc is a mineral composed of magnesium, silicon, and oxygen, commonly used in various pharmaceutical applications due to its excellent absorptive properties. It is often employed as an excipient in drug formulations and as a bulking agent in tablets and powders. Talc is also utilized in some medical procedures, such as pleurodesis, to prevent the recurrence of pleural effusions.
Indications
- Used as an excipient in drug formulations
- Pleurodesis for the management of recurrent pleural effusions
Dosage
Children: Refer to specific guidelines for paediatric use, as dosing may differ based on age and clinical condition.
Adults: Refer to specific guidelines for the appropriate dosage in pleurodesis and other applications, as it may vary based on clinical context.
Mechanism of action
Talc exhibits very good absorptive properties, allowing it to absorb moisture and other substances effectively. This characteristic is particularly useful in pharmaceutical formulations, where it may enhance the stability and texture of the drug product.
Pharmacodynamics
Talc's primary pharmacodynamic effect is its ability to act as an inert filler and bulking agent in pharmaceutical preparations. It does not have any intrinsic pharmacological activity but serves to improve the physical properties of formulations, such as flowability and compressibility.
Pharmacokinetics
Talc is not absorbed systemically when used as an excipient or in medical procedures. Its effects are local, and it remains in the site of application, where it functions primarily as a mechanical agent. The pharmacokinetics of talc in the context of its use in pleurodesis involves its ability to promote adhesion of the pleural surfaces, thereby preventing fluid accumulation.
Pregnancy
Talc is classified as a substance with minimal systemic absorption, but safety during pregnancy has not been well established. Consult relevant guidelines.
Breast-feeding
Talc is not expected to be absorbed in significant amounts; however, caution is advised and consult guidelines.
Storage
Store in a cool, dry place, away from direct sunlight.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Clinical monograph: yellow
BNF-referencedYellow is a compound with the molecular formula C24H12O2. It is not a specific drug but may refer to a class of compounds or a colorant used in various applications. Detailed pharmacological data and clinical applications are not provided in the standard references.
Pregnancy
No specific data available, consult a healthcare professional.
Breast-feeding
No specific data available, consult a healthcare professional.
Storage
Store in a cool, dry place away from light.
AI-synthesized from BNF references - general information only, not a substitute for professional medical advice or the current BNF. Verify doses with a pharmacist.
Molecular reference: Azithromycin
PubChem CID 447043Molecular formula: C38H72N2O12
Mechanism of action
In order to replicate, bacteria require a specific process of protein synthesis, enabled by ribosomal proteins. Azithromycin binds to the 23S rRNA of the bacterial 50S ribosomal subunit. It stops bacterial protein synthesis by inhibiting the transpeptidation/translocation step of protein synthesis and by inhibiting the assembly of the 50S ribosomal subunit,. This results in the control of various bacterial infections,. The strong affinity of macrolides, including azithromycin, for bacterial ribosomes, is consistent with their broad‐spectrum antibacterial activities. Azithromycin is highly stable at a low pH, giving it a longer serum half-life and increasing its concentrations in tissues compared to erythromycin. Azithromycin usually is bacteriostatic, although the drug may be bactericidal in high concentrations against selected organisms. Bactericidal activity has been observed in vitro against Streptococcus pyogenes, S. pneumoniae, and Haemophilus influenzae. Azithromycin inhibits protein synthesis in susceptible organisms by penetrating the cell wall and binding to 50S ribosomal subunits, thereby inhibiting translocation of aminoacyl transfer-RNA and inhibiting polypeptide synthesis. The site of action of azithromycin appears to be the same as that of the macrolides (i.e., erythromycin, clarithromycin), clindamycin, lincomycin, and chloramphenicol. The antimicrobial activity of azithromycin is reduced at low pH. Azithromycin concentrates in phagocytes, including polymorphonuclear leukocytes, monocytes, macrophages, and fibroblasts. Penetration of the drug into phagocytic cells is necessary for activity against intracellular pathogens (e.g., Staphylococcus aureus, Legionella pneumophila, Chlamydia trachomatis, Salmonella typhi).
Pharmacodynamics
Macrolides stop bacterial growth by inhibiting protein synthesis and translation, treating bacterial infections. Azithromycin has additional immunomodulatory effects and has been used in chronic respiratory inflammatory diseases for this purpose.
Biological pathways
Source: PubChem (NCBI) · pathways from PathBank, Reactome, WikiPathways & PharmGKB.
Molecular reference: glycolate
PubChem CID 757Molecular formula: C2H4O3
Mechanism of action
Ethylene glycol toxicity results from its metabolism to glycolic acid and other toxic metabolites. The accumulation of glycolate and the elimination kinetics of ethylene glycol and its metabolites are not well understood, so studies with male Sprague-Dawley rats and mixed breed dogs have been carried out. Ethylene glycol was administered by gavage to rats and dogs which were placed in metabolic cages for urine and blood sample collection at timed intervals. The peak plasma level of ethylene glycol occurred at 2 hr after dosing and that of glycolate between 4-6 hr. The rate of ethylene glycol elimination was somewhat faster in rats with a half-life of 1.7 hr compared to 3.4 hr in dogs. The maximum plasma level of glycolate was greater in rats although the pattern of accumulation was similar to that in dogs. Glycolate disappeared from the plasma at the same time as ethylene glycol, suggesting a slower rate of elimination of the metabolite than that of ethylene glycol. Renal excretion of ethylene glycol was an important route for its elimination accounting for 20-30% of the dose. Renal excretion of glycolate represented about 5% of the dose. Ethylene glycol induced an immediate, but short lived diuresis compared to that in control rats. Minimal clinical effects (mild acidosis with no sedation) were noted at these doses of ethylene glycol (1-2 g/kg) in both rats and dogs. The results indicate that the toxicokinetics of ethylene glycol and glycolate were similar in both species. The effect of 0.35 to 0.8 mmol/kg glycolic acid and 1.0 to 4.4 mmol/kg sodium glycolate on cyclopropane-epinephrine induced cardiac arrhythmias was examined using dogs. Doses of 0.35 to 0.5 mmol/kg glycolic acid increased the duration of arrhythmias in the 13 dogs tested, whereas doses >0.5 mmol/kg decreased or totally eliminated the arrhythmias in each of 11 dogs. Depression was observed for many of the dogs at higher doses. Sodium glycolate was much less effective in decreasing the arrhythmias, with 3 mmol/kg being required and its action being transient.
Biological pathways
Source: PubChem (NCBI) · pathways from PathBank, Reactome, WikiPathways & PharmGKB.
Molecular reference: silicon
PubChem CID 5461123Molecular formula: Si
Source: PubChem (NCBI) · pathways from PathBank, Reactome, WikiPathways & PharmGKB.
Molecular reference: talc
PubChem CID 165411828Molecular formula: H2Mg3O12Si4
Mechanism of action
It has very good absorptive properties.
Source: PubChem (NCBI) · pathways from PathBank, Reactome, WikiPathways & PharmGKB.
Molecular reference: yellow
PubChem CID 31412Molecular formula: C24H12O2
Source: PubChem (NCBI) · pathways from PathBank, Reactome, WikiPathways & PharmGKB.
This drug in other countries
The same active ingredient registered across other registries we cover - including different brands.
- AGYCIN 250 TABLETS (Each tablet contains Azithromycin Dihydrate 250mg) · Bliss Gvs Pharma
- AGYCIN 500 TABLETS (Each tablet contains Azithromycin Dihydrate 500mg) · Bliss Gvs Pharma
- APZITHRO 500 TABLETS (Each film coated tablet contains Azithromycin 500mg · Asian Pharma
- AZEX TABLETS · Expert Pharmaceuticals
- AZICIN 500MG TABLETS · Biomatrix Healthcare
- AZIDRIVE 250 TABLETS ( Azithromycin Dihydrate 250mg) · Addii Biotech