D-STROY

Indications

• Seborrhoeic dermatitis
• Dandruff
• Scalp psoriasis
• Bacterial infections affecting the scalp

Dosage

Children: For children, apply 3 times a week for 1 week, then apply twice weekly as needed. Refer to BNF for Children for further details.

Adults: Apply to the affected area as directed, typically 1-3 times weekly depending on the condition being treated. Refer to specific product guidelines for detailed dosing.

Mechanism of action

Benzalkonium chloride exerts its antimicrobial effect by disrupting the cell membrane of microorganisms, leading to leakage of cellular contents and ultimately cell death. This is facilitated by its cationic nature, which allows it to bind to negatively charged bacterial surfaces.

Pharmacodynamics

Benzalkonium chloride demonstrates rapid bactericidal activity, with effectiveness observed against gram-positive and gram-negative bacteria, fungi, and some viruses. Its antiseptic properties may be enhanced in the presence of moisture and are typically influenced by the concentration of the solution used.

Pharmacokinetics

Benzalkonium chloride is poorly absorbed through the skin. After topical application, it remains primarily at the site of application, where it exerts localized effects. Systemic absorption is minimal, and it is primarily eliminated through the skin and urine. However, specific pharmacokinetic data may vary based on formulation and application site.

Pregnancy

Benzalkonium chloride should be used with caution during pregnancy. Refer to specific guidelines or consult a healthcare professional.

Breast-feeding

Benzalkonium chloride should be used with caution while breastfeeding. Refer to specific guidelines or consult a healthcare professional.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Shampoo
• Soap or detergent
• Topical solution

Indications

• Disinfection of surfaces
• Antiseptic for skin
• Preservative in pharmaceuticals
• Treatment of minor cuts and abrasions

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations in pediatric populations.

Adults: Refer to the BNF for specific formulations and concentrations as doses may vary based on the application and preparation.

Mechanism of action

The bactericidal action of benzalkonium chloride is believed to result from the disruption of intermolecular interactions, which leads to the dissociation of cellular membrane lipid bilayers in bacteria. This disruption compromises cellular permeability, causing leakage of vital cellular contents. Moreover, the agent can deactivate important molecular complexes such as enzymes that regulate various respiratory and metabolic activities within the cells. Cationic surfactants like benzalkonium chloride can thus effectively disrupt critical intermolecular interactions and tertiary structures in biochemical systems, impairing bacterial function.

Pharmacodynamics

Benzalkonium chloride is classified as a biocidal agent with a relatively long duration of action. It exhibits a spectrum of activity against various microorganisms, including bacteria, certain viruses, fungi, and protozoa; however, it is ineffective against bacterial spores. The agent tends to demonstrate greater efficacy against gram-positive bacteria compared to gram-negative ones. The mode of action can be bacteriostatic (preventing growth) or bactericidal (killing bacteria), depending on its concentration. The activity of benzalkonium chloride is generally stable across different pH levels but is enhanced at elevated temperatures and with extended exposure.

Pharmacokinetics

The pharmacokinetic properties of benzalkonium chloride, including absorption, distribution, metabolism, and excretion, are not fully characterized. Its topical application limits systemic exposure, and it primarily exerts localized effects at the site of application. The duration of action and efficacy may be influenced by the formulation and concentration used.

Pregnancy

Benzalkonium chloride is generally considered safe for use during pregnancy when applied topically, but systemic absorption should be minimized. Always consult a healthcare provider for use during pregnancy.

Breast-feeding

Benzalkonium chloride is considered safe for topical application during breastfeeding, but care should be taken to avoid exposure to the infant. Consultation with a healthcare provider is recommended.

Storage

Store at room temperature, away from moisture and heat. Keep in a tightly closed container, protected from light.

Formulations

• Topical solution
• Disinfectant wipes
• Liquid antiseptics

Indications

• Alcohol use disorder
• Acute alcohol intoxication
• Antiseptic for skin disinfection

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes, ion channels, enzymes, and receptors. Ethanol binds directly to the receptors for acetylcholine, serotonin, GABA, and NMDA receptors for glutamate. The sedative effects are mediated through binding to GABA receptors and glycine receptors, while also inhibiting NMDA receptor functioning. As an anti-infective, ethanol acts as an osmolyte, disrupting the osmotic balance across cell membranes. The acute effects result from competitive inhibition of glycine binding to NMDA receptors, leading to disrupted glutamatergic neurotransmission.

Pharmacodynamics

Ethanol produces cellular injury through dehydration and precipitation of cytoplasm, contributing to its bactericidal and antifungal actions. It can lead to neuritis and nerve degeneration when injected near nerve tissues. Up to 98% of ethanol in the body is oxidized, primarily by the hepatic enzyme alcohol dehydrogenase. Its modulation of neurotransmitter receptors, particularly GABA and NMDA, leads to its sedative properties and potential for developing tolerance with chronic use.

Pharmacokinetics

Ethanol is readily absorbed from the gastrointestinal tract and distributed throughout the body. It has a volume of distribution of approximately 0.5 to 0.6 L/kg. Ethanol is metabolized predominantly in the liver by alcohol dehydrogenase to acetaldehyde, which is further oxidized to acetic acid by aldehyde dehydrogenase. The elimination half-life of ethanol varies but is generally around 4 to 5 hours. Factors such as age, sex, body weight, and genetic variability can influence ethanol metabolism.

Contra-indications

• Hypersensitivity to ethanol
• Acute alcohol intoxication
• Severe liver disease
• Pregnancy (in non-medicinal use)
• Severe pancreatitis
• Severe head injury or intracranial bleeding

Adverse effects

• Dizziness
• Nausea
• Vomiting
• Headache
• Sedation
• Cognitive impairment
• Respiratory depression
• Hypotension
• Gastrointestinal bleeding
• Alcohol withdrawal syndrome

Interactions

• CNS depressants (e.g., benzodiazepines, opioids) may enhance sedative effects
• Disulfiram may cause unpleasant reactions when taken with ethanol
• Acetaminophen may increase hepatic toxicity when used with ethanol
• Warfarin may have altered effects when used with ethanol

Precautions

• Caution in patients with a history of alcohol abuse
• Use with caution in patients with hepatic impairment
• Monitor for signs of respiratory depression
• Consider potential for addiction and withdrawal symptoms
• Use in moderation in older adults due to increased sensitivity

Pregnancy

Ethanol should be avoided during pregnancy due to the risk of fetal alcohol spectrum disorders.

Breast-feeding

Ethanol can pass into breast milk; breastfeeding should be avoided for a minimum of 2 hours after consumption.

Storage

Store in a cool, dry place away from light. Keep tightly closed and out of reach of children.

Formulations

• Oral solutions
• Topical antiseptics
• Intravenous formulations
• Medicinal tinctures

Mechanism of action

Although not entirely elucidated, the bactericidal action of benzalkonium chloride is believed to be due to the disruption of intermolecular interactions. Such disruption can cause the dissociation of cellular membrane lipid bilayers of bacteria, resulting in compromised cellular permeability control and the leakage of important cellular contents. Additionally, other important molecular complexes like enzymes which control the maintenance of a great range of respiratory and metabolic cellular activities, are also susceptible to such deactivation. Consequently, a variety of critical intermolecular interactions and tertiary structures in very highly specific biochemical systems that allow bacterial agents to function normally can be readily disrupted or deactivated by cationic surfactants like benzalkonium chloride..

Pharmacodynamics

Benzalkonium chloride solutions are generally categorized as biocidal agents with relative long durations of action. Their spectrum of activity has been demonstrated against bacteria, to some viruses, fungi, and protozoa, although bacterial spores are treated as being resistant to the agent. Additionally, the agent generally shows more activity against gram-positive than gram-negative bacteria. Finally, solutions of benzalkonium chloride are bacteriostatic or bactericidal based on their concentration. Bacteriostatic agents act to prevent further growth of bacterial organisms that are present while bactericidal agents function to kill bacteria that are present. In general, the activity of the agent is not largely affected by pH, but such activity does increase substantially at higher temperatures and prolonged exposure times.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.