Dapzin10-M

Indications

• Type 2 diabetes mellitus
• Gestational diabetes
• Management of pre-existing diabetes in pregnant women

Dosage

Children: For children aged 10 years and older, the usual starting dose is 500 mg taken with food, with gradual increases based on clinical response. Refer to the BNF for Children for specific dosing recommendations.

Adults: The initial dose is usually 500 mg to 1,000 mg taken orally with food, and the dosage may be gradually increased based on glycemic control and tolerance, with a maximum daily dose typically not exceeding 2,000 mg.

Mechanism of action

Metformin decreases hepatic glucose production and increases peripheral glucose utilization. It does not stimulate insulin release from the pancreas, making it antihyperglycemic rather than hypoglycemic. The drug also interacts with SIRT1, a protein involved in bile acid metabolism, contributing to its effects on glucose homeostasis.

Pharmacodynamics

Metformin improves glycemic control in patients with type 2 diabetes by reducing fasting and postprandial plasma glucose levels. It acts by decreasing intestinal absorption of glucose, increasing insulin sensitivity, and enhancing peripheral glucose uptake and utilization, without causing hypoglycemia.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract and is excreted unchanged in the urine. It has a half-life of about 6 hours and does not undergo significant metabolism. The drug's pharmacokinetics can be affected by renal function, and caution is advised in patients with renal impairment.

Contra-indications

• Severe renal impairment (creatinine clearance less than 25 mL/minute)
• Acute or chronic metabolic acidosis, including diabetic ketoacidosis
• Hypersensitivity to metformin or any of its components

Adverse effects

• Nausea
• Vomiting
• Diarrhea
• Abdominal pain
• Lactic acidosis (rare)
• Hepatic disorders (rare)
• Oedema (rare)
• Acute generalised exanthematous pustulosis (very rare)
• Thrombocytopenia (very rare)

Interactions

• Angiotensin-converting enzyme inhibitors and angiotensin II receptor antagonists may require monitoring and adjustments
• Antacids containing magnesium and aluminium salts may reduce the absorption of metformin
• Concomitant use with other antihyperglycemic agents requires careful monitoring for hypoglycemia

Precautions

• Caution in patients with hepatic impairment
• Monitor liver function regularly during treatment
• Patients should be advised to discontinue use in the event of significant illness, especially dehydration or infections

Pregnancy

Avoid use during pregnancy. Women planning to become pregnant should discontinue metformin and consult a healthcare provider for safer alternatives.

Breast-feeding

Avoid use during breastfeeding. Metformin is excreted in breast milk, and its effects on a nursing infant are unknown.

Storage

Store in a cool, dry place, below 25°C. Protect from light.

Formulations

• Metformin hydrochloride 500 mg tablets
• Metformin hydrochloride 850 mg tablets
• Metformin hydrochloride 1000 mg tablets

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Type 2 diabetes mellitus as monotherapy or in combination with insulin or other antidiabetic drugs
• Chronic heart failure with reduced ejection fraction
• Chronic kidney disease

Dosage

Children: Refer to the BNF for Children for specific dosing information

Adults: 10 mg once daily, with caution advised in renal impairment (avoid initiation if eGFR less than 30 mL/min/1.73 m2).

Mechanism of action

Dapagliflozin inhibits the sodium-glucose cotransporter 2 (SGLT2) located in the proximal tubule of the nephron, leading to decreased glucose reabsorption and increased urinary glucose excretion. This mechanism contributes to better glycemic control in patients with type 2 diabetes mellitus.

Pharmacodynamics

Dapagliflozin reduces sodium reabsorption, increasing sodium delivery to the distal tubule, which may decrease both pre- and afterload on the heart. This results in downregulation of sympathetic activity and reduced intraglomerular pressure, mediated by increased tubuloglomerular feedback. Clinical studies have shown that doses of dapagliflozin lead to significant urinary glucose excretion, with near-maximum effects observed at higher doses.

Pharmacokinetics

Dapagliflozin is rapidly absorbed after oral administration, with peak plasma concentrations occurring within 1 to 2 hours. It has a half-life of approximately 12.9 hours. The drug undergoes extensive metabolism primarily via UGT1A9 and UGT2B7, with renal excretion of metabolites. The pharmacokinetics may be affected by renal function, with caution advised if the estimated glomerular filtration rate (eGFR) is less than 60 mL/min/1.73 m2.

Contra-indications

• Severe renal impairment (eGFR less than 30 mL/minute/1.73 m2)
• Hypersensitivity to dapagliflozin or any excipients

Adverse effects

• Genital mycotic infections
• Urinary tract infections
• Dehydration
• Hypotension
• Diabetic ketoacidosis
• Acute kidney injury

Interactions

• Concomitant use with insulin or other antidiabetic agents may require dose adjustments to avoid hypoglycaemia
• Diuretics may enhance the risk of dehydration and hypotension
• Other drugs affecting renal function may require monitoring

Precautions

• Monitor renal function before initiation and periodically thereafter
• Consider risk of diabetic ketoacidosis in patients
• Use with caution in patients with a history of urinary tract infections or genital infections

Pregnancy

Avoid-toxicity in animal studies.

Breast-feeding

Avoid-present in milk in animal studies.

Storage

Store at room temperature, away from moisture and heat.

Formulations

• Tablets: 5 mg, 10 mg

Indications

• Used as an excipient in pharmaceutical formulations
• Improves solubility and bioavailability of active ingredients

Dosage

Children: Refer to specific product formulations for dosing guidance, as behenate is primarily used as an excipient.

Adults: Refer to specific product formulations for dosing guidance, as behenate is primarily used as an excipient.

Mechanism of action

Behenate functions mainly as a surfactant and emulsifying agent. It interacts with lipids and cellular membranes, enhancing the solubility of poorly soluble drugs and facilitating their absorption in the gastrointestinal tract. By modifying the physicochemical properties of drug formulations, behenate improves the pharmacokinetic profiles of certain medications.

Pharmacodynamics

The pharmacodynamics of behenate are primarily linked to its role as an excipient rather than an active pharmaceutical ingredient. Its interaction with cellular membranes can lead to altered absorption rates and enhanced solubility of co-administered drugs. Its effects are dependent on the concentration used within the formulation and the properties of the active ingredients it accompanies.

Pharmacokinetics

As behenate is usually employed in formulations rather than used alone, specific pharmacokinetic data is limited. However, it is known to be absorbed and metabolized similarly to other long-chain fatty acids. The absorption through the gastrointestinal tract is influenced by the presence of bile acids and the overall lipid content of the diet. Metabolism typically involves the conversion to various metabolites through beta-oxidation in the liver.

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Hypovolemic shock
• Severe burns
• Postoperative fluid replacement
• Sepsis
• Trauma management

Dosage

Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Mechanism of action

Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.

Pharmacodynamics

The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.

Pharmacokinetics

Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.

Adverse effects

• Allergic reactions
• Injection site reactions
• Nausea
• Vomiting
• Headache
• Fever

Precautions

• Use with caution in patients with known allergies to any component of the formulation
• Monitor for signs of hypersensitivity during administration
• Consider volume overload in patients with cardiac or renal impairment

Pregnancy

The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.

Storage

Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.

Formulations

• Colloidal silver
• Colloidal gold
• Colloidal iron
• Other metal colloids

Indications

• Used as an excipient in solid dosage forms
• Facilitates drug disintegration and dissolution

Dosage

Children: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Adults: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Mechanism of action

Crospovidone acts by rapidly absorbing water and swelling upon contact with moisture. This action leads to the disintegration of solid dosage forms, thus increasing the surface area of the active ingredients and promoting their dissolution and subsequent absorption in the gastrointestinal tract. It does not affect the pH of the formulation, ensuring that the active ingredients remain stable.

Pharmacodynamics

Crospovidone exhibits properties that enhance the bioavailability of active ingredients in pharmaceutical formulations. Its ability to rapidly disintegrate tablets and capsules leads to quicker release and absorption of the drug into systemic circulation. As a disintegrant, it aids in the effective delivery of drugs that may otherwise be poorly soluble.

Pharmacokinetics

Crospovidone itself is not absorbed systemically when administered orally. It remains in the gastrointestinal tract, where it performs its function as a disintegrant. The pharmacokinetic profile of drugs formulated with crospovidone may be influenced by the enhanced dissolution and absorption rates provided by this excipient.

Pregnancy

Crospovidone is considered to have low toxicity and is generally regarded as safe for use during pregnancy, but specific studies are limited.

Breast-feeding

There is insufficient data on the excretion of crospovidone in human milk, but it is deemed safe for use during breastfeeding.

Storage

Store in a cool, dry place away from light and moisture, in tightly closed containers.

Formulations

• Powder
• Tablets

Mechanism of action

Dichloromethane induces mammary adenomas in rats through an indirect mechanism involving hyperprolactinaemia, resulting in benign neoplasms. It does not bind to DNA in various tissues, suggesting that its carcinogenic effects are likely mediated through metabolic pathways in the liver. In mice, DCM acts as a hepatic and pulmonary carcinogen, mediated by interaction with DNA through a glutathione (GSH) conjugate produced by the enzyme glutathione S-transferase T1-1 (GST T1-1).

Pharmacodynamics

Dichloromethane exhibits carcinogenic properties, particularly evident in animal studies where exposure leads to liver and lung tumors. The incidence of tumors varies by species, with higher susceptibility observed in mice due to differences in glutathione transferase activity. Its effects on humans are still uncertain, necessitating caution in its handling and use due to potential health risks.

Pharmacokinetics

Dichloromethane is rapidly absorbed through inhalation and dermal exposure, with peak blood concentrations occurring shortly after exposure. It undergoes extensive hepatic metabolism primarily via cytochrome P450 enzymes, leading to the formation of reactive metabolites. The elimination half-life is relatively short, with excretion occurring mainly through the lungs and urine.

Pregnancy

Dichloromethane should be avoided during pregnancy due to its potential carcinogenic effects and lack of safety data in pregnant women.

Breast-feeding

It is not known whether dichloromethane is excreted in human milk, thus it should be used with caution in breastfeeding mothers.

Storage

Store in a cool, dry place away from heat and light. Keep container tightly closed.

Indications

• Monitoring respiratory function
• Assessment of metabolic status
• Management of respiratory acidosis
• Management of respiratory alkalosis

Dosage

Children: Dosing for interventions related to carbon dioxide levels in pediatric patients should be guided by clinical protocols and the BNF for Children.

Adults: Dosing for interventions related to carbon dioxide levels is typically based on clinical assessment and individual patient needs. Refer to clinical guidelines for specific scenarios.

Mechanism of action

Carbon dioxide acts primarily as a signaling molecule in the body, influencing respiratory drive and blood pH. It is produced during cellular respiration and is a critical component of the bicarbonate buffering system, which helps maintain acid-base homeostasis. Elevated levels of CO2 in the blood stimulate ventilation in the lungs, increasing the rate of gas exchange and facilitating the removal of excess CO2.

Pharmacodynamics

The pharmacodynamic effects of dioxides, particularly carbon dioxide, are closely related to its concentration in the blood. As CO2 levels increase, it leads to respiratory acidosis, which can stimulate the respiratory centers in the brain to increase ventilation. Conversely, low levels of CO2 can cause respiratory alkalosis, potentially leading to decreased respiratory drive. CO2 also plays a role in vasodilation and can affect blood flow and pressure through its influence on smooth muscle tone.

Pharmacokinetics

Carbon dioxide is produced endogenously during metabolic processes and is transported in the bloodstream primarily in three forms: dissolved in plasma, as bicarbonate ions (HCO3-), and bound to hemoglobin. The half-life of CO2 in the bloodstream is very short due to its rapid exchange with alveolar gas in the lungs. The elimination of CO2 occurs through exhalation, making it a dynamic component of respiratory physiology.

Pregnancy

Data on the effects of dioxide during pregnancy are limited. Caution is advised due to potential risks associated with exposure.

Breast-feeding

Limited data are available regarding the excretion of dioxide in human milk. Caution is recommended.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Indications

• Iron deficiency anemia
• Chronic blood loss
• Nutritional iron deficiency
• Pregnancy-related anemia

Dosage

Children: Refer to the BNF for Children for specific dosing information as it may vary based on the formulation and clinical context.

Adults: Refer to the BNF for specific dosing information as it may vary based on the formulation and clinical context.

Mechanism of action

Ferric ions participate in various biological processes, including oxygen transport and electron transfer. They facilitate the formation of hemoglobin in red blood cells, allowing for efficient oxygen delivery throughout the body. Ferric compounds can also promote the absorption of iron from the gastrointestinal tract by providing a more bioavailable form of iron.

Pharmacodynamics

Ferric compounds exhibit their effects primarily through the restoration of iron levels in the body. This leads to improved synthesis of hemoglobin and overall enhancement of oxygen-carrying capacity. The pharmacological action is dose-dependent, with higher doses leading to more pronounced effects on hemoglobin levels and erythropoiesis. Additionally, ferric ions can influence various metabolic pathways involved in cellular respiration and energy production.

Pharmacokinetics

Ferric is absorbed in the gastrointestinal tract, with absorption rates influenced by dietary factors and the presence of other substances in the gut. Once absorbed, ferric ions are transported in the bloodstream bound to transferrin, a transport protein. The body regulates iron levels primarily through absorption rather than excretion, and excess iron can be stored in the liver, spleen, and bone marrow. The elimination of ferric compounds is generally slow, as they are incorporated into various biological systems or stored for future use.

Contra-indications

• Hypersensitivity to ferric compounds
• Iron overload conditions such as haemochromatosis or haemosiderosis
• Chronic liver disease
• Active peptic ulcer disease

Adverse effects

• Gastrointestinal disturbances including nausea, vomiting, and constipation
• Diarrhea
• Abdominal pain
• Black stools
• Allergic reactions including rashes and anaphylaxis
• Staining of teeth (with oral formulations)

Interactions

• Antacids may reduce the absorption of oral ferric preparations
• Tetracyclines and quinolone antibiotics may have reduced absorption when taken with iron
• Ascorbic acid may enhance the absorption of iron

Precautions

• Caution in patients with a history of gastrointestinal disease
• Monitor for signs of iron overload in patients receiving repeated doses
• Use with caution in patients with renal impairment

Pregnancy

Ferric compounds are generally considered safe in pregnancy when used as directed to treat iron deficiency, but should be used under medical supervision.

Breast-feeding

Ferric compounds are excreted in breast milk in small amounts, usually considered safe but should be used under medical supervision.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Oral tablets
• Oral solution
• Intravenous injection

Indications

• Management of elevated intraocular pressure in glaucoma
• Treatment of constipation due to its laxative effect
• Use as a humectant in dermatological preparations
• Osmotic therapy in certain cases of renal failure or fluid overload

Dosage

Children: Refer to specific guidelines or product information for dosing.

Adults: Refer to specific guidelines or product information for dosing.

Mechanism of action

Glycerol acts primarily as an osmotic agent. It interacts with cell membranes and encourages the movement of water across them, which can lead to a decrease in cellular swelling. This property is utilized in the treatment of conditions like glaucoma, where it decreases intraocular pressure by pulling fluid from the vitreous humor. Additionally, glycerol may enhance the absorption of certain medications through the gastrointestinal tract.

Pharmacodynamics

Glycerol's osmotic effects result in increased plasma osmolality, which can draw water out from tissues, reducing edema and fluid overload. It also has mild diuretic effects, promoting the excretion of urine. Glycerol's sweet taste makes it useful in formulations intended for oral consumption, enhancing palatability for patients, particularly children.

Pharmacokinetics

Glycerol is readily absorbed from the gastrointestinal tract and distributed throughout the body. It is metabolized primarily in the liver, where it can be converted into glucose or fatty acids. The elimination half-life of glycerol varies based on the route of administration and individual patient factors but is generally short due to its rapid metabolism. It is mostly excreted in the urine as metabolites.

Adverse effects

• Headache
• Nausea
• Dizziness
• Hypotension
• Flushing
• Tachycardia

Interactions

• Other antihypertensives may potentiate hypotensive effects
• Alcohol may enhance the hypotensive effects

Precautions

• Use with caution in patients with a history of hypotension
• Monitor blood pressure regularly during treatment
• Caution in patients with heart failure or other cardiovascular diseases

Pregnancy

Use only if the benefits outweigh the risks, as safety in pregnancy has not been well established.

Breast-feeding

Use with caution; consult a healthcare provider.

Storage

Store in a cool, dry place away from light.

Formulations

• Sublingual tablets
• Oral tablets
• Injections
• Topical preparations

Indications

• Anxiety disorders
• Nausea and vomiting
• Allergic conditions
• Preoperative sedation
• Pruritus

Dosage

Children: Refer to the BNF for Children for appropriate dosing recommendations based on age and weight.

Adults: Refer to the BNF for specific dosing guidelines based on the indication and patient characteristics.

Mechanism of action

Hydroxyzine works by antagonizing the H1 histamine receptors, leading to a reduction in the effects of histamine in the body. This action helps alleviate symptoms of allergic reactions and promotes sedation. Additionally, it may exert effects on serotonin and adrenergic receptors, which could contribute to its anxiolytic properties. Hydroxyzine is also involved in various metabolic pathways, including selenium metabolism and the degradation of reactive oxygen species.

Pharmacodynamics

The pharmacodynamic effects of hydroxyzine include sedation, anxiolysis, and reduction of allergic symptoms. Its sedative effects can make it useful in managing anxiety and inducing sleep, while its antihistaminic properties help to relieve symptoms such as itching and rashes associated with allergic reactions. The onset of action is typically within 15 to 30 minutes when taken orally, with peak effects occurring within 1 to 2 hours.

Pharmacokinetics

Hydroxyzine is well absorbed from the gastrointestinal tract, with peak plasma concentrations occurring approximately 2 hours after oral administration. It is extensively metabolized in the liver, with metabolites, including cetirizine, possessing their own therapeutic effects. Hydroxyzine has a half-life of approximately 20 hours, allowing for once or twice daily dosing. It is primarily excreted in the urine, with less than 1% of the unchanged drug found in urine.

Interactions

• hydroxyzine+antiepileptics: Severe (increases risk of overheating and dehydration)
• hydroxyzine+zonisamide: Severe (increases risk of overheating and dehydration)
• hydroxychloroquine+penicillamine: Severe (increases risk of haematological toxicity)
• hydroxychloroquine+agalsidase alfa: Unknown (decreases effects)
• hydroxychloroquine+agalsidase beta: Unknown (decreases exposure)
• hydroxychloroquine+oral cholera vaccine: Unknown (decreases efficacy)
• live vaccines+hydroxy carbamide: Unknown (increases risk of generalised infection (possibly life-threatening))
• lanthanum+hydroxychloroquine: Unknown (decreases absorption)
• macrolides+hydroxychloroquine: Unknown (increases risk of serious cardiovascular adverse effects)
• hydroxychloroquine+remdesivir: Unknown (decreases effects)

Pregnancy

Safety in pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Use with caution. Hydroxychloroquine is excreted in breast milk, and effects on the infant are unknown.

Storage

Store in a cool, dry place, protected from light. Keep out of reach of children.

Formulations

• Tablets
• Oral solution

Indications

• Antiseptic for skin disinfection
• Solvent in pharmaceutical formulations
• Cleaning agent in laboratories and healthcare settings

Dosage

Children: For pediatric use, consult specific guidelines in the BNF for Children, as dosing may vary based on age, weight, and clinical circumstances.

Adults: For skin antisepsis, apply isopropyl alcohol topically in a concentration of 70% to the affected area. Dosage may vary based on clinical indication and setting.

Mechanism of action

Isopropyl alcohol works primarily as an antiseptic by denaturing proteins and disrupting cell membranes of bacteria, viruses, and fungi, leading to cell lysis and death. Its efficacy is enhanced by the presence of water, which facilitates the penetration of the alcohol into microbial cells.

Pharmacodynamics

Isopropyl alcohol exhibits a rapid onset of action against a variety of pathogens, including gram-positive and gram-negative bacteria, fungi, and some viruses. Its antimicrobial activity is concentration-dependent, with higher concentrations generally providing a broader spectrum of activity. It is commonly used in concentrations ranging from 60% to 90%, with 70% being optimal for disinfection due to its ability to penetrate the cell wall effectively.

Pharmacokinetics

Isopropyl alcohol is readily absorbed through the skin and mucous membranes. After absorption, it is metabolized primarily in the liver to acetone, which is then further metabolized and excreted, mostly via urine. The elimination half-life of isopropyl alcohol varies but is typically around 2 to 3 hours. Its effects can be influenced by factors such as dosage, route of exposure, and individual metabolic differences.

Pregnancy

Isopropyl alcohol should be used with caution during pregnancy. It is a category C drug, indicating that risk cannot be ruled out.

Breast-feeding

Caution is advised when using isopropyl alcohol during breastfeeding, as it is not known if it is excreted in human milk.

Storage

Isopropyl alcohol should be stored at room temperature, away from heat and flame. Keep the container tightly closed and in a well-ventilated area.

Formulations

• Isopropyl alcohol 70% solution
• Isopropyl alcohol 99% solution

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Indications

• Type 2 diabetes mellitus
• Polycystic ovary syndrome (PCOS)

Dosage

Children: The

Adults: The usual starting dose of metformin for adults is 500 mg taken orally twice a day or 850 mg once daily, with gradual increases based on tolerance and blood glucose levels. The maximum recommended daily dose is 2000-3000 mg, depending on the formulation used.

Mechanism of action

Metformin decreases blood glucose levels by decreasing hepatic glucose production (gluconeogenesis), decreasing intestinal absorption of glucose, and increasing insulin sensitivity, which enhances peripheral glucose uptake and utilization. It is known to inhibit mitochondrial complex I activity, leading to increased AMP:ATP ratios that activate AMP-activated protein kinase (AMPK), a key regulator of glucose metabolism. This activation results in reduced hepatic glucose output and improved cellular glucose uptake.

Pharmacodynamics

Metformin exerts its effects primarily by enhancing insulin sensitivity and reducing glucose production by the liver. Unlike sulfonylureas, which increase insulin secretion, metformin does not cause hyperinsulinemia. Its ability to lower fasting plasma glucose and glycosylated hemoglobin (HbA1c) levels makes it a cornerstone in the management of type 2 diabetes. Clinical studies have shown significant reductions in fasting plasma glucose and HbA1c levels in patients treated with metformin.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract, with peak plasma concentrations typically occurring 2-3 hours after ingestion. It has a bioavailability of approximately 50-60% when administered orally. The drug is primarily eliminated unchanged by the kidneys, and its clearance is proportional to renal function. The half-life of metformin is about 6.5 hours. Accumulation may occur in cases of renal impairment, necessitating caution in patients with reduced renal function.

Adverse effects

• Gastrointestinal disturbances (nausea, vomiting, diarrhea)
• Lactic acidosis
• Vitamin B12 deficiency

Interactions

• dolutegravir+metformin: Moderate (increases exposure)
• cimetidine+metformin: Moderate (increases exposure)
• risdiplam+metformin: Moderate (increases concentration)
• vandetanib+metformin: Moderate (increases exposure)
• bictegravir+metformin: Unknown (increases exposure)
• guanfacine+metformin: Unknown (increases concentration)
• mexiletine+metformin: Unknown (affects exposure)
• pitolisant+metformin: Unknown (increases exposure)
• ribociclib+metformin: Unknown (increases exposure)

Precautions

• Renal impairment
• Dehydration
• Excessive alcohol intake

Pregnancy

Metformin is classified as a Category B medication. It is often used during pregnancy for managing gestational diabetes but should be administered under medical supervision.

Breast-feeding

Metformin is excreted in breast milk, but is generally considered safe for use during breastfeeding. Consult with a healthcare provider for specific guidance.

Storage

Store in a cool, dry place, away from direct light. Keep out of reach of children.

Formulations

• Tablets
• Extended-release tablets
• Oral solution

Indications

• Allergic conditions
• Autoimmune diseases
• Asthma and chronic obstructive pulmonary disease (COPD)
• Certain cancers (e.g., leukemia, lymphoma)
• Skin conditions (e.g., dermatitis)
• Inflammatory bowel disease
• Multiple sclerosis exacerbations
• Severe infections requiring immunosuppression

Dosage

Children: Refer to BNF for Children for specific dosing; doses vary significantly based on the child's age, weight, and condition being treated.

Adults: Refer to BNF for specific dosing; typically, initial doses range from 4 to 48 mg depending on the severity of the condition.

Mechanism of action

Methylprednisolone exerts its effects by binding to glucocorticoid receptors, leading to the modulation of gene expression. This interaction influences the transcription of anti-inflammatory proteins while suppressing the expression of pro-inflammatory genes, ultimately resulting in reduced inflammation and immune response.

Pharmacodynamics

The pharmacodynamic effects of methylprednisolone are characterized by its ability to decrease inflammation, suppress the immune response, and affect carbohydrate metabolism. Therapeutic doses lead to various systemic effects, including modification of leukocyte distribution and inhibition of cytokine production.

Pharmacokinetics

Methylprednisolone is well absorbed after oral administration, with a bioavailability of approximately 50%. It has a volume of distribution that reflects extensive tissue binding. The drug is metabolized primarily in the liver through conjugation and reduction, and its metabolites are excreted in urine. The half-life varies based on the route of administration but is generally around 18 to 36 hours.

Adverse effects

• Increased blood pressure
• Hyperglycemia
• Weight gain
• Mood changes
• Insomnia
• Gastrointestinal disturbances
• Increased susceptibility to infections

Interactions

• methylphenidate+apraclonidine: Severe (decreases effects)
• methylthioninium chloride+bupropion: Severe (increases risk of severe hypertension)
• methylphenidate+linezolid: Severe (increases risk of elevated blood pressure)
• rasagiline+methylphenidate: Severe (increases risk of a hypertensive crisis)
• mao-inhibitors+methylphenidate: Severe (increases risk of a hypertensive crisis)
• dronedarone+methylprednisolone: Moderate (increases exposure)
• miconazole+methylprednisolone: Moderate (increases concentration)
• antifungals, azoles+methylprednisolone: Moderate (increases exposure)
• crizotinib+methylprednisolone: Moderate (increases exposure)

Precautions

• Use with caution in patients with hypertension
• Monitor blood glucose levels in diabetic patients
• Consider potential for infection risk due to immunosuppression
• Evaluate for psychiatric effects in susceptible individuals

Pregnancy

Corticosteroids may be used during pregnancy if the potential benefit justifies the risk to the fetus. Careful monitoring is advised.

Breast-feeding

Corticosteroids are excreted in breast milk; caution is advised. Monitor the infant for potential effects.

Storage

Store in a cool, dry place, away from light. Keep out of reach of children.

Formulations

• Tablets
• Injectable solutions
• Topical preparations

Mechanism of action

Methylsulphate functions as a methylating agent, transferring a methyl group to nucleophiles. This process involves the formation of a sulfonium ion, which is highly reactive and can readily react with nucleophilic sites on various substrates, leading to methylation reactions.

Pharmacodynamics

The pharmacodynamics of methylsulphate is primarily related to its role as a methylating agent in biochemical reactions. It can alter the structure and function of biological molecules, potentially affecting cellular processes and signaling pathways. However, detailed pharmacodynamic studies specific to therapeutic use are limited.

Pharmacokinetics

There is limited information on the pharmacokinetics of methylsulphate, given its typical use as a reagent in laboratory settings rather than a clinical drug. When used in chemical reactions, its reactivity and transformation into other compounds would dictate its pharmacokinetic profile, which could vary significantly based on the specific context of use.

Pregnancy

There is limited data on the use of methylsulphate in pregnancy. Consult relevant guidelines.

Breast-feeding

Data on the excretion of methylsulphate in human milk is not available. Caution is advised.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Mechanism of action

Oxides do not have a single mechanism of action as they are a broad category of compounds. However, in general, metal oxides can exhibit catalytic properties, while non-metal oxides may participate in biochemical reactions by forming acids or bases upon dissolution in water.

Pharmacodynamics

The pharmacodynamics of oxides depend on the specific type of oxide and its interaction with biological systems. For instance, metal oxides may have antimicrobial properties, while certain non-metal oxides can influence metabolic pathways through their acid-base chemistry. The effects vary widely, necessitating specific studies for each oxide's role in therapeutic contexts.

Pharmacokinetics

The pharmacokinetics of oxides are also variable. Many metal oxides are poorly soluble and thus have limited absorption when ingested. Non-metal oxides, such as carbon dioxide, can be readily absorbed and utilized in metabolic processes. The distribution, metabolism, and excretion of oxides depend on their chemical form and the biological system in which they are involved.

Pregnancy

Not applicable as oxide is not a drug but a class of chemical compounds.

Breast-feeding

Not applicable as oxide is not a drug but a class of chemical compounds.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Emulsifying agent in drug formulations
• Stabilizer for parenteral preparations
• Solubilizer for hydrophobic drug compounds
• Ingredient in topical formulations

Dosage

Children: Refer to specific product guidelines, as dosing varies based on formulation and intended use.

Adults: Refer to specific product guidelines, as dosing varies based on formulation and intended use.

Mechanism of action

Polysorbate functions primarily as an emulsifying agent. It reduces the surface tension between immiscible liquids, allowing them to mix more easily. This property is particularly useful in stabilizing emulsions and suspensions, facilitating the delivery of active pharmaceutical ingredients in various formulations.

Pharmacodynamics

Polysorbate does not exert pharmacological effects in the traditional sense, as it does not bind to specific receptors to elicit a physiological response. Instead, it plays a crucial role in modifying the physical properties of drug formulations, thereby enhancing drug delivery and absorption. Its ability to solubilize drugs enhances their bioavailability, particularly for poorly soluble compounds.

Pharmacokinetics

Polysorbate is generally considered to be non-toxic and is not absorbed to a significant extent when administered orally. It is metabolized by the liver and excreted primarily through the gastrointestinal tract. The pharmacokinetic profile may vary depending on the route of administration and the specific formulation in which it is used.

Adverse effects

• Allergic reactions
• Skin irritation
• Gastrointestinal disturbances

Precautions

• Use cautiously in patients with known allergies to polysorbates or related compounds
• Monitor for allergic reactions in susceptible individuals

Pregnancy

Polysorbate is generally considered safe for use during pregnancy, but consult with a healthcare provider for specific cases.

Breast-feeding

Polysorbate is considered safe during breastfeeding, but consult with a healthcare provider for individual advice.

Storage

Store at room temperature, away from direct sunlight and moisture.

Formulations

• Polysorbate 20
• Polysorbate 80

Indications

• Topical antiseptic for skin disinfection
• Surgical scrubs and hand sanitizers
• Wound care management
• Pharmaceutical excipient in solid and liquid formulations

Dosage

Children: Refer to specific product guidelines for pediatric dosing recommendations, as doses can vary based on formulation and intended use.

Adults: Refer to specific product guidelines for dosing recommendations, as doses can vary based on the formulation and intended use.

Mechanism of action

Povidone acts by forming a complex with iodine when used as an antiseptic, which releases iodine slowly to exert its antimicrobial effect. The iodine disrupts microbial cell walls and interferes with protein synthesis, leading to cell death. Additionally, as a polymer, povidone can enhance drug solubility and stability by forming a hydrophilic matrix.

Pharmacodynamics

Povidone has a broad spectrum of antimicrobial activity against bacteria, viruses, and fungi. Its antiseptic properties are primarily due to the release of iodine, which is effective in reducing microbial load and preventing infection. The polymer's ability to bind to various substances allows it to be utilized in formulations that require improved stability and solubility.

Pharmacokinetics

Povidone is not absorbed systemically when applied topically, as it remains localized at the site of application. Its pharmacokinetics are largely dependent on the formulation and route of administration, with the polymer being metabolized by hydrolysis and excreted in urine as low-molecular-weight compounds. The release and activity of iodine are influenced by the concentration of povidone and the presence of organic matter.

Adverse effects

• Local irritation
• Allergic reactions
• Skin rashes
• Hypersensitivity reactions

Precautions

• Use with caution in patients with known allergies to iodine or povidone-iodine
• Avoid use in deep puncture wounds or serious burns

Pregnancy

Povidone is generally considered safe for use during pregnancy, but it is advisable to consult a healthcare professional before use.

Breast-feeding

Povidone is considered safe during breastfeeding, but it is recommended to consult a healthcare professional.

Storage

Store at room temperature, away from moisture and heat. Keep the container tightly closed.

Formulations

• Topical solution
• Ointment
• Surgical scrub
• Gauze impregnated with povidone-iodine

Dosage

Children: Refer to product-specific guidelines for dosing information.

Adults: Refer to product-specific guidelines for dosing information.

Pregnancy

Consult healthcare provider for risk assessment.

Breast-feeding

Consult healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Hyperthyroidism
• Graves' disease
• Thyroid storm

Dosage

Children: Refer to the BNF

Adults: The usual initial dose of propylthiouracil in adults is 300 mg per day, divided into 3 doses. The maintenance dose is typically 100-150 mg per day, adjusted based on thyroid function tests.

Mechanism of action

Propylthiouracil acts by inhibiting the enzyme thyroid peroxidase, which is involved in the iodination of tyrosine residues in thyroglobulin, a precursor of thyroid hormones. By blocking this enzyme, PTU reduces the production of thyroxine (T4) and triiodothyronine (T3), leading to decreased thyroid hormone levels in circulation. Additionally, PTU inhibits the conversion of T4 to T3 in peripheral tissues, further contributing to its antithyroid effects.

Pharmacodynamics

The pharmacodynamic effects of propylthiouracil are primarily centered around its ability to lower thyroid hormone levels, which helps alleviate symptoms of hyperthyroidism such as increased heart rate, weight loss, and anxiety. The onset of action can vary, but therapeutic effects may be observed within several weeks of initiation. Monitoring thyroid function tests is essential to assess the efficacy and adjust dosing as needed.

Pharmacokinetics

Propylthiouracil is well absorbed from the gastrointestinal tract, though its bioavailability can be affected by factors such as food intake. The drug is extensively metabolized in the liver, and its elimination half-life averages around 1-2 hours. Most of the drug is excreted in urine as metabolites. It is important to note that due to its rapid metabolism, multiple daily doses may be required to maintain therapeutic levels.

Interactions

• propylthiouracil+metyrapone: Severe (decreases effects)

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Potential role in bone health
• Support for connective tissue formation
• May aid in mineral metabolism

Dosage

Children: There is no established clinical dosage for silicon in paediatric populations, as it is not classified as an essential nutrient.

Adults: There is no established clinical dosage for silicon in adults, as it is not classified as an essential nutrient.

Mechanism of action

Silicon is believed to enhance the synthesis of glycosaminoglycans and collagen, which are important for the structural integrity of connective tissues. It may also influence the activity of certain enzymes involved in bone mineralization, thus playing a role in maintaining bone density and health.

Pharmacodynamics

The pharmacodynamics of silicon is not fully elucidated; however, it is thought to involve the modulation of bone metabolism and the promotion of connective tissue health. Silicon may have a synergistic effect with other minerals, such as calcium and magnesium, aiding in their utilization and metabolism in the body.

Pharmacokinetics

The pharmacokinetics of silicon is complex, as it is not absorbed through typical gastrointestinal pathways. Instead, silicon is thought to be taken up in the form of silicates and then distributed throughout the body, particularly in connective tissues. The elimination of silicon occurs primarily through renal excretion, with some variations depending on dietary intake and individual metabolism.

Pregnancy

Silicon is generally considered safe during pregnancy, as it is a naturally occurring element in the human body. However, specific recommendations regarding supplementation should be followed based on the advice of a healthcare provider.

Breast-feeding

Silicon is present in breast milk in small amounts. Its safety during breastfeeding is generally regarded as acceptable, although supplementation should be approached with caution and under medical advice.

Storage

Silicon should be stored in a cool, dry place, protected from light and moisture. Follow specific storage recommendations provided by the manufacturer if available.

Pregnancy

No specific data available, consult a healthcare professional.

Breast-feeding

No specific data available, consult a healthcare professional.

Storage

Store in a cool, dry place away from light.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Dapagliflozin inhibits the sodium-glucose cotransporter 2(SGLT2) which is primarily located in the proximal tubule of the nephron. SGLT2 facilitates 90% of glucose reabsorption in the kidneys and so its inhibition allows for glucose to be excreted in the urine. This excretion allows for better glycemic control and potentially weight loss in patients with type 2 diabetes mellitus.

Pharmacodynamics

Dapagliflozin also reduces sodium reabsorption and increases the delivery of sodium to the distal tubule. This may influence several physiological functions including, but not restricted to, lowering both pre- and afterload of the heart and downregulation of sympathetic activity, and decreased intraglomerular pressure which is believed to be mediated by increased tubuloglomerular feedback. Increases in the amount of glucose excreted in the urine were observed in healthy subjects and in patients with type 2 diabetes mellitus following the administration of dapagliflozin. Dapagliflozin doses of 5 or 10 mg per day in patients with type 2 diabetes mellitus for 12 weeks resulted in excretion of approximately 70 grams of glucose in the urine per day at Week 12. A near-maximum glucose excretion was observed at the dapagliflozin daily dose of 20 mg. This urinary glucose excretion with dapagliflozin also results in increases in urinary volume. After discontinuation of dapagliflozin, on average, the elevation in urinary glucose excretion approaches baseline by about 3 days for the 10 mg dose. Dapagliflozin was not associated with clinically meaningful prolongation of QTc interval at daily doses up to 150 mg (15 times the recommended maximum dose) in a study of healthy subjects. In addition, no clinically meaningful effect on QTc interval was observed following single doses of up to 500 mg (50 times the recommended maximum dose) of dapagliflozin in healthy subjects.

Mechanism of action

Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Metformin has no significant effects on the secretion of glucagon, cortisol, growth hormone or somatostatin. Metformin reduces glucose levels primarily by decreasing hepatic glucose production and by increasing insulin action in muscle and fat. ... May decrease plasma glucose by reducing the absorption of glucose from the intestine. /Salt not specified/ Metformin potentiates the effect of insulin by mechanisms not fully understood. Metformin does not stimulate pancreatic beta cells to increase secretion of insulin; insulin secretion must be present for metformin to work properly. It is postulated that metformin decreases hepatic glucose production and improves insulin sensitivity by increasing peripheral glucose uptake and utilization. /Salt not specified/ People with Type 2 diabetes mellitus (T2DM) have reduced bone mineral density and an increased risk of fractures due to altered mesenchymal stem cell (MSC) differentiation in the bone marrow. This leads to a shift in the balance of differentiation away from bone formation (osteogenesis) in favour of fat cell development (adipogenesis). The commonly used anti-diabetic drug, metformin, activates the osteogenic transcription factor Runt-related transcription factor 2 (Runx2), which may suppress adipogenesis, leading to improved bone health. Here we investigate the involvement of the metabolic enzyme, AMP-activated protein kinase (AMPK), in these protective actions of metformin. The anti-adipogenic actions of metformin were observed in multipotent C3H10T1/2 MSCs, in which metformin exerted reciprocal control over the activities of Runx2 and the adipogenic transcription factor, PPARgamma, leading to suppression of adipogenesis. These effects appeared to be independent of AMPK activation but rather through the suppression of the mTOR/p70S6K signalling pathway. Basal AMPK and mTOR/p70S6K activity did appear to be required for adipogenesis, as demonstrated by the use of the AMPK inhibitor, compound C. This observation was further supported by using AMPK knockout mouse embryo fibroblasts (MEFs) where adipogenesis, as assessed by reduced lipid accumulation and expression of the adipogeneic transcription factor, C/EBPbeta, was found to display an absolute requirement for AMPK. Further activation of AMPK in wild type MEFS, with either metformin or the AMPK-specific activator, A769662, was also associated with suppression of adipogenesis. It appears, therefore, that basal AMPK activity is required for adipogenesis and that metformin can inhibit adipogenesis through AMPK-dependent or -independent mechanisms, depending on the cellular context.

Mechanism of action

The mechanism by which methylene chloride induces mammary adenomas in the rat is important for human hazard assessment. Female Sprague- Dawley rats receiving methylene chloride have a high blood level of prolactin. In common with the response to other agents which act via hyperprolactinaemia, the methylene chloride-induced response is of benign neoplasms only. There is no evidence for the binding of methylene chloride to the DNA of other tissues and hence it seems unlikely that it will bind to mammary tissue when the primary site of metabolism is the liver. It seems most likely, therefore, that the increased incidence of mammary adenomas is the result of an indirect mechanism operating via hyperprolactinaemia. Dichloromethane (DCM) is a hepatic and pulmonary carcinogen in mice exposed to high doses by inhalation. It has been shown previously that the incidence of liver and lung tumors does not increase in rats or hamsters exposed to the dihaloalkane under conditions similar to those that produced tumors in mice. The biological consequences of DCM exposure to humans is therefore uncertain. The carcinogenic effects of DCM in the mouse are caused by the interaction with DNA of a glutathione (GSH) conjugate that is produced by the class theta glutathione S-transferase T1-1 (GST T1-1). The species specificity is thought to be due to the greater amount of transferase activity in mouse target organs and specific nuclear localization of GST T1-1 in target cells. This paper directly compares the relative capacity and locality of DCM activation in mouse and human tissues. The results show that mouse GST T1-1 is more efficient in catalyzing the conjugation of DCM with GSH than the orthologous human enzyme. In addition, the mouse expresses higher levels of the transferase than humans in hepatic tissue. Histochemical analysis confirmed the presence of GST T1-1 in the nucleus of mouse liver cells. However, in human liver GST T1-1 was detected in bile duct epithelial cells and hepatocyte nuclei but was also present in the cytoplasm. Taking this information into account, it is unlikely that humans have a sufficiently high capacity to activate DCM for this compound to be considered to represent a carcinogenic risk. Dichloromethane (DCM) is considered a probable human carcinogen. Laboratory studies have shown an increased incidence of lung and liver cancer in mice but not in rats or hamsters. Despite the correlation between metabolism of DCM by the glutathione-S-transferase (GST) pathway and the occurrence of tumors in different species, the mechanism of tumor induction by DCM metabolites produced through the GST pathway remains unclear. In this study a V79 cell line stably transfected with the murine GST theta 1 gene (mGSTT1) was compared to the parent cell line (MZ) to determine how the construct affects DCM metabolism and the sensitivity of the cell line to DNA damage and cytotoxicity. V79 cells were treated with DCM (2.5-10mM) or formaldehyde (150-600muM) for 2hr. Also, formaldehyde produced by V79 cytosol metabolism of DCM was measured spectrophotometrically. DNA damage and DNA-protein crosslinks were measured by the standard and proteinase K-modified alkaline single cell gel electrophoresis (SCG) assays. Cytotoxicity was assessed by trypan blue stain exclusion, the Live/Dead((R)) cell viability/cytotoxicity kit for animal cells, and the neutral red assay. After DCM treatment a significant concentration-dependent increase in tail moment in the V79 MZ cells was observed compared to a significant concentration-dependent decrease in tail moment in the V79 mGSTT1 cells. Post-incubation with proteinase K significantly increased DNA migrations in DCM-treated V79 mGSTT1 cells. DCM formed significantly higher levels of formaldehyde in the cytosol of the V79 mGSTT1 cells than in the cytosol of the V79 MZ cells. Results using the cytotoxicity assays were comparable using the trypan blue and Live/Dead((R)) assays, neither showing a difference in resp

Mechanism of action

Metformin's mechanisms of action are unique from other classes of oral antihyperglycemic drugs. Metformin decreases blood glucose levels by decreasing hepatic glucose production (also called gluconeogenesis), decreasing the intestinal absorption of glucose, and increasing insulin sensitivity by increasing peripheral glucose uptake and utilization. It is well established that metformin inhibits mitochondrial complex I activity, and it has since been generally postulated that its potent antidiabetic effects occur through this mechanism. The above processes lead to a decrease in blood glucose, managing type II diabetes and exerting positive effects on glycemic control. After ingestion, the organic cation transporter-1 (OCT1) is responsible for the uptake of metformin into hepatocytes (liver cells). As this drug is positively charged, it accumulates in cells and in the mitochondria because of the membrane potentials across the plasma membrane as well as the mitochondrial inner membrane. Metformin inhibits mitochondrial complex I, preventing the production of mitochondrial ATP leading to increased cytoplasmic ADP:ATP and AMP:ATP ratios. These changes activate AMP-activated protein kinase (AMPK), an enzyme that plays an important role in the regulation of glucose metabolism. Aside from this mechanism, AMPK can be activated by a lysosomal mechanism involving other activators. Following this process, increases in AMP:ATP ratio also inhibit _fructose-1,6-bisphosphatase_ enzyme, resulting in the inhibition of gluconeogenesis, while also inhibiting _adenylate cyclase_ and decreasing the production of cyclic adenosine monophosphate (cAMP), a derivative of ATP used for cell signaling. Activated AMPK phosphorylates two isoforms of acetyl-CoA carboxylase enzyme, thereby inhibiting fat synthesis and leading to fat oxidation, reducing hepatic lipid stores and increasing liver sensitivity to insulin. In the intestines, metformin increases anaerobic glucose metabolism in enterocytes (intestinal cells), leading to reduced net glucose uptake and increased delivery of lactate to the liver. Recent studies have also implicated the gut as a primary site of action of metformin and suggest that the liver may not be as important for metformin action in patients with type 2 diabetes. Some of the ways metformin may play a role on the intestines is by promoting the metabolism of glucose by increasing glucagon-like peptide I (GLP-1) as well as increasing gut utilization of glucose. In addition to the above pathway, the mechanism of action of metformin may be explained by other ways, and its exact mechanism of action has been under extensive study in recent years. Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Me

Pharmacodynamics

**General effects** Insulin is an important hormone that regulates blood glucose levels. Type II diabetes is characterized by a decrease in sensitivity to insulin, resulting in elevations in blood glucose when the pancreas can no longer compensate. In patients diagnosed with type 2 diabetes, insulin is unable to exert adequate effects on tissues and cells (i.e. insulin resistance) and insulin deficiency may also be present. Metformin reduces hepatic production of glucose, decreases the intestinal absorption of glucose, and enhances insulin sensitivity by increasing both peripheral glucose uptake and utilization. In contrast with drugs of the sulfonylurea class, which lead to hyperinsulinemia, the secretion of insulin is unchanged with metformin use. **Effect on fasting plasma glucose (FPG) and Glycosylated hemoglobin (HbA1c)** HbA1c is an important periodic measure of glycemic control used to monitor diabetic patients. Fasting plasma glucose is also a useful and important measure of glycemic control. In a 29-week clinical trial of subjects diagnosed with type II diabetes, metformin decreased the fasting plasma glucose levels by an average of 59 mg/dL from baseline, compared to an average increase of 6.3 mg/dL from baseline in subjects taking a placebo. Glycosylated hemoglobin (HbA1c) was decreased by about 1.4% in subjects receiving metformin, and increased by 0.4% in subjects receiving placebo only.