Eyevir

Indications

• Herpes simplex infection (including genital herpes)
• Herpes zoster (shingles)
• Varicella (chickenpox)
• Prophylaxis in immunocompromised patients

Dosage

Children: For children 2-17 years: 200-400 mg 4 times a day for herpes simplex; for herpes zoster: 5 mg/kg every 8 hours for 5 days.

Adults: For Herpes simplex treatment: 200 mg 5 times a day for 5 days; for Herpes zoster: 800 mg 5 times a day for 7 days.

Mechanism of action

Aciclovir is a nucleoside analogue that inhibits viral DNA synthesis. It is selectively activated in infected cells by the viral enzyme thymidine kinase, leading to the inhibition of viral replication.

Pharmacodynamics

Aciclovir exhibits antiviral activity primarily against herpes simplex virus types 1 and 2 and varicella-zoster virus. Its effectiveness is enhanced when treatment is initiated early, ideally within 72 hours of symptom onset.

Pharmacokinetics

Aciclovir is well absorbed after oral administration, with a bioavailability of approximately 15-30%. It is widely distributed in body tissues and fluids, including the central nervous system. The drug is primarily excreted unchanged in the urine, with a half-life of about 2.5 to 3 hours in patients with normal renal function. Dose adjustment is required in renal impairment.

Adverse effects

• eye irritation
• eye pain
• headache
• hypotension
• nausea
• syncope
• blurred vision

Interactions

• aciclovir + aminophylline: Moderate (increases exposure)
• aciclovir + theophylline: Moderate (increases exposure)
• aciclovir + live vaccines: Unknown (decreases efficacy)
• aciclovir + herpes-zoster vaccine: Unknown (decreases efficacy)
• mycophenolate + aciclovir: Unknown (increases risk of haematological toxicity)

Pregnancy

Aciclovir can be used in pregnancy but specialist advice should be sought for chickenpox treatment due to associated complications.

Breast-feeding

No specific information provided.

Storage

Store at room temperature, protect from light.

Formulations

• 500 mg tablet
• 200 mg/5 ml oral suspension
• 5% eye ointment
• 20 mg/ml injection solution

Indications

• Seborrhoeic dermatitis
• Dandruff
• Scalp psoriasis
• Bacterial infections affecting the scalp

Dosage

Children: For children, apply 3 times a week for 1 week, then apply twice weekly as needed. Refer to BNF for Children for further details.

Adults: Apply to the affected area as directed, typically 1-3 times weekly depending on the condition being treated. Refer to specific product guidelines for detailed dosing.

Mechanism of action

Benzalkonium chloride exerts its antimicrobial effect by disrupting the cell membrane of microorganisms, leading to leakage of cellular contents and ultimately cell death. This is facilitated by its cationic nature, which allows it to bind to negatively charged bacterial surfaces.

Pharmacodynamics

Benzalkonium chloride demonstrates rapid bactericidal activity, with effectiveness observed against gram-positive and gram-negative bacteria, fungi, and some viruses. Its antiseptic properties may be enhanced in the presence of moisture and are typically influenced by the concentration of the solution used.

Pharmacokinetics

Benzalkonium chloride is poorly absorbed through the skin. After topical application, it remains primarily at the site of application, where it exerts localized effects. Systemic absorption is minimal, and it is primarily eliminated through the skin and urine. However, specific pharmacokinetic data may vary based on formulation and application site.

Pregnancy

Benzalkonium chloride should be used with caution during pregnancy. Refer to specific guidelines or consult a healthcare professional.

Breast-feeding

Benzalkonium chloride should be used with caution while breastfeeding. Refer to specific guidelines or consult a healthcare professional.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Shampoo
• Soap or detergent
• Topical solution

Indications

• Disinfection of surfaces
• Antiseptic for skin
• Preservative in pharmaceuticals
• Treatment of minor cuts and abrasions

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations in pediatric populations.

Adults: Refer to the BNF for specific formulations and concentrations as doses may vary based on the application and preparation.

Mechanism of action

The bactericidal action of benzalkonium chloride is believed to result from the disruption of intermolecular interactions, which leads to the dissociation of cellular membrane lipid bilayers in bacteria. This disruption compromises cellular permeability, causing leakage of vital cellular contents. Moreover, the agent can deactivate important molecular complexes such as enzymes that regulate various respiratory and metabolic activities within the cells. Cationic surfactants like benzalkonium chloride can thus effectively disrupt critical intermolecular interactions and tertiary structures in biochemical systems, impairing bacterial function.

Pharmacodynamics

Benzalkonium chloride is classified as a biocidal agent with a relatively long duration of action. It exhibits a spectrum of activity against various microorganisms, including bacteria, certain viruses, fungi, and protozoa; however, it is ineffective against bacterial spores. The agent tends to demonstrate greater efficacy against gram-positive bacteria compared to gram-negative ones. The mode of action can be bacteriostatic (preventing growth) or bactericidal (killing bacteria), depending on its concentration. The activity of benzalkonium chloride is generally stable across different pH levels but is enhanced at elevated temperatures and with extended exposure.

Pharmacokinetics

The pharmacokinetic properties of benzalkonium chloride, including absorption, distribution, metabolism, and excretion, are not fully characterized. Its topical application limits systemic exposure, and it primarily exerts localized effects at the site of application. The duration of action and efficacy may be influenced by the formulation and concentration used.

Pregnancy

Benzalkonium chloride is generally considered safe for use during pregnancy when applied topically, but systemic absorption should be minimized. Always consult a healthcare provider for use during pregnancy.

Breast-feeding

Benzalkonium chloride is considered safe for topical application during breastfeeding, but care should be taken to avoid exposure to the infant. Consultation with a healthcare provider is recommended.

Storage

Store at room temperature, away from moisture and heat. Keep in a tightly closed container, protected from light.

Formulations

• Topical solution
• Disinfectant wipes
• Liquid antiseptics

Mechanism of action

Acyclovir is becomes acyclovir monophosphate due to the action of viral thymidine kinase. Acyclovir monophosphate is converted to the diphosphate form by guanylate kinase. Acyclovir diphosphate is converted to acyclovir triphosphate by nucleoside diphosphate kinase, pyruvate kinase, creatine kinase, phosphoglycerate kinase, succinyl-CoA synthetase, phosphoenolpyruvate carboxykinase and adenylosuccinate synthetase. Acyclovir triphosphate has higher affinity for viral DNA polymerase than cellular DNA polymerase and incorporates into the DNA where the missing 2' and 3' carbons causes DNA chain termination. In other cases acyclovir triphosphate competes so strongly for viral DNA polymerase that other bases cannot associate with the enzyme, inactivating it. Acyclovir is a synthetic purine nucleoside analogue with in vitro and in vivo inhibitory activity against herpes simplex virus types 1 (HSV-1), 2 (HSV-2), and varicella-zoster virus (VZV). The inhibitory activity of acyclovir is highly selective due to is affinity for the enzyme thymidine kinase (TK) encoded by HSV and VZV. This viral enzyme converts acyclovir into acyclovir monophosphate, a nucleotide analogue. The monophosphate is further converted into diphosphate by cellular guanylate kinase adn into triphosphate by a number of cellualr enzymes. In vitro, acyclovir triphosphate stops replication of herpes viral DNA. Acyclovir inhibits viral DNA synthesis ... . Its selectivity of action depends on interaction with two distinct viral proteins. Cellular uptake and initial phosphorylation are facilitated by HSV thymidine kinase. The affinity of acyclovir for HSV thymidine kinase is about 200-fold greater than for the mammalian enzyme. Cellular enzymes convert the monophosphate to acyclovir triphosphate, which is present in 40- to 100-fold higher concentrations in HSV-infected than in uninfected cells, and competes for endogenous deoxyguanosine triphosphate (dGTP). The immunosuppressive agent mycophenolate mofetil potentiates the antiherpes activity of acyclovir and related agents by depleting intracellular dGTP pools. Acyclovir triphosphate competitively inhibits viral DNA polymerases and, to a much smaller extent, cellular DNA polymerases. Acyclovir triphosphate also is incorporated into viral DNA, where it acts as a chain terminator because of the lack of 3'-hydroxyl group. By a mechanism termed suicide inactivation, the terminated DNA template containing acyclovir binds the enzyme and leads to irreversible inactivation of the DNA polymerase. The concentration of the endogenous neurotoxin quinolinic acid (QA) is increased in the central nervous system of mice with herpes simplex encephalitis. /The authors/ have previously shown that the antiherpetic agent acyclovir (AC) has the ability to reduce QA-induced neuronal damage in rat brain, by attenuating lipid peroxidation. The mechanism by which QA induces lipid peroxidation includes the enhancement of the iron (Fe)-mediated Fenton reaction and the generation of free radicals, such as the superoxide anion (O(2)(-)). Thus, the present study determined whether AC has the ability to reduce Fe(2+)-induced lipid peroxidation, O(2)(-) generation and QA-induced superoxide anion generation, and to bind free Fe. O(2)(-) and Fe(2+) are also cofactors of the enzymes, indoleamine-2,3-dioxygenase (IDO) and 3-hydroxyanthranilate-3,4-dioxygenase (3-HAO) respectively. These enzymes catalyse steps in the biosynthesis of QA; thus, the effect of AC on their activity was also investigated. AC significantly attenuates Fe(2+)-induced lipid peroxidation and O(2)(-) generation. AC reduces O(2)(-) generation in the presence of QA and strongly binds Fe(2+) and Fe(3+). It also reduces the activity of both IDO and 3-HAO, which could be attributed to the superoxide anion scavenging and iron binding properties, respectively, of this drug.

Pharmacodynamics

Acyclovir is a deoxynucleoside analog that inhibits the action of viral DNA polymerase and DNA replication of different herpesvirus. Acyclovir has a wide therapeutic window as overdose is rare in otherwise healthy patients.

Mechanism of action

Although not entirely elucidated, the bactericidal action of benzalkonium chloride is believed to be due to the disruption of intermolecular interactions. Such disruption can cause the dissociation of cellular membrane lipid bilayers of bacteria, resulting in compromised cellular permeability control and the leakage of important cellular contents. Additionally, other important molecular complexes like enzymes which control the maintenance of a great range of respiratory and metabolic cellular activities, are also susceptible to such deactivation. Consequently, a variety of critical intermolecular interactions and tertiary structures in very highly specific biochemical systems that allow bacterial agents to function normally can be readily disrupted or deactivated by cationic surfactants like benzalkonium chloride..

Pharmacodynamics

Benzalkonium chloride solutions are generally categorized as biocidal agents with relative long durations of action. Their spectrum of activity has been demonstrated against bacteria, to some viruses, fungi, and protozoa, although bacterial spores are treated as being resistant to the agent. Additionally, the agent generally shows more activity against gram-positive than gram-negative bacteria. Finally, solutions of benzalkonium chloride are bacteriostatic or bactericidal based on their concentration. Bacteriostatic agents act to prevent further growth of bacterial organisms that are present while bactericidal agents function to kill bacteria that are present. In general, the activity of the agent is not largely affected by pH, but such activity does increase substantially at higher temperatures and prolonged exposure times.