Feburic 80

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Chronic hyperuricaemia in gout
• Prophylaxis of hyperuricaemia associated with cancer chemotherapy

Dosage

Adults: Initially 80 mg once daily, may increase to 120 mg once daily based on serum uric acid levels after 2-4 weeks. In the context of cancer therapy, the initial dose is 20 mg once daily, to be started 2 days prior to chemotherapy.

Mechanism of action

Febuxostat inhibits xanthine oxidoreductase (XOR), blocking both its oxidase and dehydrogenase activities. This inhibition reduces the conversion of hypoxanthine and xanthine to uric acid, effectively decreasing serum uric acid levels. By binding to a specific site in the XOR enzyme, febuxostat prevents the formation of reactive oxygen species associated with vascular inflammation.

Pharmacodynamics

Febuxostat is a novel, selective xanthine oxidase inhibitor that reduces serum uric acid levels in a dose-dependent manner. Clinical studies have shown that it can decrease mean serum uric acid concentrations by 40 to 55% at daily doses of 40-80 mg. It primarily functions by mobilizing urate crystals from tissue deposits, which can lead to gout flares; however, it does not inhibit other enzymes involved in purine metabolism.

Pharmacokinetics

Febuxostat is well absorbed following oral administration, with peak plasma concentrations typically reached within 1-2 hours. The drug is extensively metabolized in the liver, primarily through the cytochrome P450 system, and eliminated mainly via urine and feces. The half-life of febuxostat is approximately 5 to 8 hours, allowing for once-daily dosing.

Contra-indications

• Severe hypersensitivity to febuxostat
• History of hypersensitivity to allopurinol
• Severe renal disease

Adverse effects

• Rash
• Nausea
• Vomiting
• Hypersensitivity reactions
• Stevens-Johnson syndrome
• Agranulocytosis
• Anaphylactic shock
• Alopecia
• Angina
• Angioedema
• Immunoblastic T-cell lymphoma
• Aplastic anemia
• Asthenia
• Ataxia
• Boils
• Bradycardia
• Cataracts
• Coma
• Depression
• Diabetes mellitus
• Drowsiness
• Erectile dysfunction
• Fever
• Hyperlipidemia
• Hypertension
• Infertility (male)
• Maculopathy
• Malaise
• Oedema
• Paraesthesia
• Paralysis
• Peripheral neuropathy
• Severe cutaneous adverse reactions (SCARs)
• Stomatitis
• Taste alteration
• Thrombocytopenia
• Vertigo
• Visual impairment

Interactions

• Febuxostat + Azathioprine: Severe (increases exposure)
• Febuxostat + Mercaptopurine: Severe (increases exposure)

Precautions

• Ensure adequate fluid intake (2–3 litres/day)
• Monitor for signs and symptoms of severe hypersensitivity reactions
• Patients with a history of major cardiovascular disease should be monitored closely due to increased risk of cardiovascular death and all-cause mortality

Pregnancy

Toxicity not reported. Use only if no safer alternative and if benefits outweigh risks.

Breast-feeding

Present in milk; not known to be harmful.

Storage

Store below 30 degrees Celsius. Protect from moisture.

Formulations

• Febuxostat 80 mg tablets
• Febuxostat 120 mg tablets

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Hypovolemic shock
• Severe burns
• Postoperative fluid replacement
• Sepsis
• Trauma management

Dosage

Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Mechanism of action

Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.

Pharmacodynamics

The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.

Pharmacokinetics

Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.

Adverse effects

• Allergic reactions
• Injection site reactions
• Nausea
• Vomiting
• Headache
• Fever

Precautions

• Use with caution in patients with known allergies to any component of the formulation
• Monitor for signs of hypersensitivity during administration
• Consider volume overload in patients with cardiac or renal impairment

Pregnancy

The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.

Storage

Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.

Formulations

• Colloidal silver
• Colloidal gold
• Colloidal iron
• Other metal colloids

Indications

• Used as a disintegrant in tablet formulations
• Enhances the bioavailability of active pharmaceutical ingredients

Dosage

Children: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Adults: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Mechanism of action

Croscarmellose sodium works by swelling and absorbing water when it comes into contact with gastrointestinal fluids. This swelling leads to the rapid disintegration of the tablet or capsule matrix, facilitating the release and absorption of the active pharmaceutical ingredients.

Pharmacodynamics

Croscarmellose sodium is classified as a superdisintegrant. Its ability to rapidly disintegrate solid dosage forms can significantly enhance the dissolution rate of the active ingredient, which is crucial for achieving therapeutic effects in a timely manner.

Pharmacokinetics

Croscarmellose sodium is not absorbed in the gastrointestinal tract and does not exert pharmacological effects in the body. It is considered non-toxic and is excreted unchanged. Its main role is as an excipient, influencing the formulation's characteristics rather than the pharmacokinetics of the active ingredients.

Precautions

• Use with caution in patients with known hypersensitivity to croscarmellose or its components.

Pregnancy

Safety in pregnancy has not been established. Use only if clearly needed.

Breast-feeding

Caution is advised when using during breastfeeding, as safety has not been established.

Storage

Store in a cool, dry place, away from moisture and heat.

Formulations

• Powder
• Granules

Indications

• Monitoring respiratory function
• Assessment of metabolic status
• Management of respiratory acidosis
• Management of respiratory alkalosis

Dosage

Children: Dosing for interventions related to carbon dioxide levels in pediatric patients should be guided by clinical protocols and the BNF for Children.

Adults: Dosing for interventions related to carbon dioxide levels is typically based on clinical assessment and individual patient needs. Refer to clinical guidelines for specific scenarios.

Mechanism of action

Carbon dioxide acts primarily as a signaling molecule in the body, influencing respiratory drive and blood pH. It is produced during cellular respiration and is a critical component of the bicarbonate buffering system, which helps maintain acid-base homeostasis. Elevated levels of CO2 in the blood stimulate ventilation in the lungs, increasing the rate of gas exchange and facilitating the removal of excess CO2.

Pharmacodynamics

The pharmacodynamic effects of dioxides, particularly carbon dioxide, are closely related to its concentration in the blood. As CO2 levels increase, it leads to respiratory acidosis, which can stimulate the respiratory centers in the brain to increase ventilation. Conversely, low levels of CO2 can cause respiratory alkalosis, potentially leading to decreased respiratory drive. CO2 also plays a role in vasodilation and can affect blood flow and pressure through its influence on smooth muscle tone.

Pharmacokinetics

Carbon dioxide is produced endogenously during metabolic processes and is transported in the bloodstream primarily in three forms: dissolved in plasma, as bicarbonate ions (HCO3-), and bound to hemoglobin. The half-life of CO2 in the bloodstream is very short due to its rapid exchange with alveolar gas in the lungs. The elimination of CO2 occurs through exhalation, making it a dynamic component of respiratory physiology.

Pregnancy

Data on the effects of dioxide during pregnancy are limited. Caution is advised due to potential risks associated with exposure.

Breast-feeding

Limited data are available regarding the excretion of dioxide in human milk. Caution is recommended.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Indications

• Antiseptic for skin disinfection
• Solvent in pharmaceutical formulations
• Cleaning agent in laboratories and healthcare settings

Dosage

Children: For pediatric use, consult specific guidelines in the BNF for Children, as dosing may vary based on age, weight, and clinical circumstances.

Adults: For skin antisepsis, apply isopropyl alcohol topically in a concentration of 70% to the affected area. Dosage may vary based on clinical indication and setting.

Mechanism of action

Isopropyl alcohol works primarily as an antiseptic by denaturing proteins and disrupting cell membranes of bacteria, viruses, and fungi, leading to cell lysis and death. Its efficacy is enhanced by the presence of water, which facilitates the penetration of the alcohol into microbial cells.

Pharmacodynamics

Isopropyl alcohol exhibits a rapid onset of action against a variety of pathogens, including gram-positive and gram-negative bacteria, fungi, and some viruses. Its antimicrobial activity is concentration-dependent, with higher concentrations generally providing a broader spectrum of activity. It is commonly used in concentrations ranging from 60% to 90%, with 70% being optimal for disinfection due to its ability to penetrate the cell wall effectively.

Pharmacokinetics

Isopropyl alcohol is readily absorbed through the skin and mucous membranes. After absorption, it is metabolized primarily in the liver to acetone, which is then further metabolized and excreted, mostly via urine. The elimination half-life of isopropyl alcohol varies but is typically around 2 to 3 hours. Its effects can be influenced by factors such as dosage, route of exposure, and individual metabolic differences.

Pregnancy

Isopropyl alcohol should be used with caution during pregnancy. It is a category C drug, indicating that risk cannot be ruled out.

Breast-feeding

Caution is advised when using isopropyl alcohol during breastfeeding, as it is not known if it is excreted in human milk.

Storage

Isopropyl alcohol should be stored at room temperature, away from heat and flame. Keep the container tightly closed and in a well-ventilated area.

Formulations

• Isopropyl alcohol 70% solution
• Isopropyl alcohol 99% solution

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Indications

• Cleansing agent in topical formulations
• Emulsifying agent in cosmetic products
• Foaming agent in shampoos and body washes

Dosage

Children: Refer to specific product formulations for appropriate concentrations and application methods.

Adults: Refer to specific product formulations for appropriate concentrations and application methods.

Mechanism of action

Lauryl sulfate functions as an anionic surfactant. It reduces the surface tension between different substances, allowing for better spreading and wetting. In the context of cleansing, it facilitates the removal of dirt and oils from the skin and hair by emulsifying these substances, thus making them easier to rinse away with water.

Pharmacodynamics

As a surfactant, lauryl sulfate displays properties that can disrupt cellular membranes and alter permeability. This mechanism is beneficial in enhancing the penetration of other therapeutic agents in topical formulations. However, its irritant potential on skin and mucous membranes should be noted, as it can lead to dryness and irritation with prolonged exposure.

Pharmacokinetics

Lauryl sulfate is primarily applied topically and is not intended for systemic absorption. When used in formulations, it acts locally at the site of application. Its absorption through the skin is minimal, and any systemic exposure is limited. Metabolism and excretion pathways are not well-defined for topical applications, as it is largely washed away after use.

Pregnancy

Safety during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Unknown whether lauryl is excreted in human milk. Caution should be exercised when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Potential role in bone health
• Support for connective tissue formation
• May aid in mineral metabolism

Dosage

Children: There is no established clinical dosage for silicon in paediatric populations, as it is not classified as an essential nutrient.

Adults: There is no established clinical dosage for silicon in adults, as it is not classified as an essential nutrient.

Mechanism of action

Silicon is believed to enhance the synthesis of glycosaminoglycans and collagen, which are important for the structural integrity of connective tissues. It may also influence the activity of certain enzymes involved in bone mineralization, thus playing a role in maintaining bone density and health.

Pharmacodynamics

The pharmacodynamics of silicon is not fully elucidated; however, it is thought to involve the modulation of bone metabolism and the promotion of connective tissue health. Silicon may have a synergistic effect with other minerals, such as calcium and magnesium, aiding in their utilization and metabolism in the body.

Pharmacokinetics

The pharmacokinetics of silicon is complex, as it is not absorbed through typical gastrointestinal pathways. Instead, silicon is thought to be taken up in the form of silicates and then distributed throughout the body, particularly in connective tissues. The elimination of silicon occurs primarily through renal excretion, with some variations depending on dietary intake and individual metabolism.

Pregnancy

Silicon is generally considered safe during pregnancy, as it is a naturally occurring element in the human body. However, specific recommendations regarding supplementation should be followed based on the advice of a healthcare provider.

Breast-feeding

Silicon is present in breast milk in small amounts. Its safety during breastfeeding is generally regarded as acceptable, although supplementation should be approached with caution and under medical advice.

Storage

Silicon should be stored in a cool, dry place, protected from light and moisture. Follow specific storage recommendations provided by the manufacturer if available.

Indications

• Thickening agent
• Stabilizer in pharmaceutical formulations
• Emulsifier in topical and oral medications

Dosage

Children: Refer to specific product guidelines, as dosing can vary based on formulation and indication.

Adults: Refer to specific product guidelines, as dosing can vary based on formulation and indication.

Mechanism of action

Substituted hydroxypropyl functions through the formation of hydrogen bonds within the polymeric structure, which increases viscosity and stabilizes emulsions. Its hydrophilic nature allows it to interact with water and other solvents, leading to improved formulation stability and bioavailability.

Pharmacodynamics

The pharmacodynamics of substituted hydroxypropyl relate primarily to its physical properties as a polysaccharide. It does not exert pharmacological effects in the traditional sense but influences the release profile of active pharmaceutical ingredients, thereby affecting their therapeutic outcomes.

Pharmacokinetics

Substituted hydroxypropyl is not absorbed systemically when used as an excipient, as it remains in the gastrointestinal tract or at the application site. It is metabolized minimally, if at all, and is excreted unchanged. Its action is predominantly local at the site of application or within the gastrointestinal lumen.

Pregnancy

Safety during pregnancy has not been established. Use only if clearly needed and potential benefits outweigh risks.

Breast-feeding

It is not known whether substituted hydroxypropyl is excreted in human milk. Caution is advised when administered to nursing women.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Dosage

Children: Refer to the BNF for Children for appropriate paediatric dosing information.

Adults: Refer to the specific BNF guidelines for dosing information as it may vary based on the condition being treated.

Mechanism of action

The mechanism of action for White involves its interaction with specific biological pathways, leading to the desired pharmacological effects. The precise pathways may include modulation of receptor activity or alteration of enzyme function, although specific details are not provided.

Pharmacodynamics

Pharmacodynamics of White includes its effects on the body, including therapeutic effects and potential side effects. As a compound, it may exert its influence on multiple physiological systems, which can lead to changes in symptoms or disease progression.

Pharmacokinetics

Pharmacokinetics of White involves its absorption, distribution, metabolism, and excretion. Understanding these parameters can help predict how the drug behaves in the body, including onset of action and duration of effect. Detailed pharmacokinetic data is not specified.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Gout is a form of acute arthritis that is characterized by the accumulation of crystals of monosodium urate and urate crystals in or around a joint, leading to inflammation and persistent urate crystal deposition in bones, joints, tissues, and other organs that may exacerbate over time. Hyperuricemia is closely related to gout, whereby it may exist for many years before the first clinical attack of gout; thus, aberrated serum uric acid levels and hyperuricemia are believed to be the biochemical aberration involved in the pathogenesis of gout. Xanthine oxidoreductase (XOR) can act as a xanthine oxidase or xanthine dehydrogenase. In humans, it is a critical enzyme for uric acid production as it catalyzes the oxidation reaction steps from hypoxanthine to xanthine and from xanthine to uric acid in the pathway of purine metabolism. Febuxostat potently inhibits XOR, blocking both its oxidase and dehydrogenase activities. With high affinity, febuxostat binds to XOR in a molecular channel leading to the molybdenum-pterin active site, where [allopurinol] demonstrates relatively weak competitive inhibition. XOR is mainly found in the dehydrogenase form under normal physiological conditions; however, in inflammatory conditions, XOR can be converted into the xanthine oxidase form, which catalyzes reactions that produce reactive oxygen species (ROS), such as peroxynitrite. ROS contribute to vascular inflammation and alterations in vascular function. As febuxostat can inhibit both forms of XOR, it can inhibit ROS formation, oxidative stress, and inflammation. In a rat model, febuxostat suppressed renal ischemia-reperfusion injury by attenuating oxidative stress.

Pharmacodynamics

Febuxostat is a novel, selective xanthine oxidase/dehydrogenase inhibitor that works by decreasing serum uric acid in a dose-dependent manner. In healthy subjects, febuxostat decreased the mean serum uric acid and serum xanthine concentrations, as well as the total urinary uric acid excretion. Febuxostat at daily doses of 40-80 mg reduced the 24-hour mean serum uric acid concentrations by 40 to 55%. Closely related to the drug-induced reduction of serum uric acid levels and mobilization of urate crystals in tissue deposits, febuxostat is associated with gout flares. Unlike [allopurinol] and [oxypurinol], febuxostat has no inhibitory actions against other enzymes involved in purine and pyrimidine synthesis and metabolism, because it does not structurally resemble purines or pyrimidines.