HYDROLIN

Indications

• Adrenocortical insufficiency
• Inflammatory bowel disease
• Severe acute asthma
• Acute hypersensitivity reactions
• Congenital adrenal hyperplasia
• Replacement therapy in adrenal insufficiency

Dosage

Children: For children aged 1-5 months: Initially 25 mg 3 times a day, adjusted according to response. For children aged 6 months-5 years: Initially 50 mg 3 times a day, adjusted according to response. For children aged 6-11 years: Initially 100 mg 3 times a day, adjusted

Adults: 100-500 mg 3-4 times a day or when required. For replacement in adrenocortical insufficiency, 20-30 mg once daily, adjusted according to response.

Mechanism of action

Hydrocortisone binds to the glucocorticoid receptor, leading to decreased vasodilation and permeability of capillaries, inhibition of leukocyte migration to inflammation sites, and changes in gene expression that promote anti-inflammatory pathways. It inhibits phospholipase A2, NF-kappa B, and other inflammatory transcription factors, stabilizing leukocyte lysosomal membranes and reducing the release of destructive enzymes. High doses can raise sodium levels and decrease potassium levels through mineralocorticoid receptor activity.

Pharmacodynamics

Hydrocortisone's pharmacodynamic profile includes the inhibition of various inflammatory mediators and the promotion of anti-inflammatory cytokines. Its effects are dose-dependent, with lower doses providing anti-inflammatory benefits, while higher doses exhibit immunosuppressive effects. It has a wide therapeutic index and moderate duration of action.

Pharmacokinetics

Hydrocortisone is metabolized primarily in the liver, with its effects lasting for several hours to days. The onset of action varies with the route of administration, being more rapid when given intravenously. Its half-life is influenced by factors such as dose and administration route, and it is excreted through urine as metabolites.

Contra-indications

• Systemic fungal infections
• Hypersensitivity to hydrocortisone or any excipients

Adverse effects

• Increased risk of infections
• Hyperglycemia
• Hypertension
• Fluid retention and edema
• Gastrointestinal disturbances
• Mood changes
• Osteoporosis
• Peptic ulcer disease
• Cushing's syndrome with long-term use

Interactions

• Mitotane: Moderate decrease in hydrocortisone exposure
• Rifampicin: Moderate decrease in hydrocortisone exposure
• Cobicistat: Unknown effect, potential increase in hydrocortisone exposure
• Idelalisib: Unknown effect, potential increase in hydrocortisone exposure
• Clarithromycin: Unknown effect, potential increase in hydrocortisone exposure

Precautions

• Use with caution in patients with diabetes
• Monitor for signs of infection during therapy
• Consider dose adjustment in patients with hepatic impairment
• Gradual withdrawal is recommended to avoid adrenal insufficiency after prolonged therapy

Pregnancy

Hydrocortisone is categorized as category C. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Hydrocortisone is excreted in breast milk. Caution is advised when administering to nursing mothers.

Storage

Store at room temperature, away from moisture and heat. Protect from light.

Formulations

• Injectable form (sodium succinate)
• Modified-release tablets
• Immediate-release tablets

Indications

• Constipation
• Bowel cleansing

Dosage

Children: Child 1–11 months: 1 g as required, Child 1–11 years: 2 g as required, Child 12–17 years: 4 g as required.

Adults: 4 g as required, usually administered rectally.

Mechanism of action

When administered rectally, glycerol exerts a hygroscopic and/or local irritant action, drawing water from the tissues into the feces and reflexively stimulating evacuation. It decreases intraocular pressure by creating an osmotic gradient between the blood and intraocular fluid, causing fluid to move from the aqueous and vitreous humors into the bloodstream. Glycerol is classified as a hyperosmotic laxative and may also have lubricating and fecal softening effects.

Pharmacodynamics

Glycerol is commonly classified as an osmotic laxative, acting through its local irritant effects and possibly having lubricating and fecal softening actions. Glycerol suppositories usually produce effects within 15 to 30 minutes, providing quick relief from constipation.

Pharmacokinetics

Glycerol is rapidly absorbed through the gastrointestinal tract. It is metabolized in the liver and other tissues, with a half-life that varies depending on the route of administration. Following rectal administration, glycerol is primarily excreted in urine. The pharmacokinetics may vary based on dosage forms and individual patient factors.

Contra-indications

• Acute abdominal conditions
• Acute inflammatory bowel disease
• Intestinal obstruction
• Severe dehydration

Adverse effects

• Abdominal cramps
• Asthenia
• Gastrointestinal disorders
• Hypermagnesaemia
• Skin reactions
• Urine discolouration

Precautions

• Avoid prolonged contact with skin, especially in incontinent patients or infants wearing nappies due to the risk of irritation and excoriation.
• Excessive use may cause diarrhea and related effects such as hypokalaemia.

Pregnancy

Manufacturers advise avoidance due to limited information available.

Breast-feeding

Manufacturers advise avoidance as there is no information available.

Storage

Store at room temperature, away from direct sunlight.

Formulations

• Glycerol 1g suppositories
• Glycerol 2g suppositories
• Glycerol 4g suppositories
• Glycerol oral suspension

Indications

• Seborrhoeic dermatitis
• Dandruff
• Scalp psoriasis
• Bacterial infections affecting the scalp

Dosage

Children: For children, apply 3 times a week for 1 week, then apply twice weekly as needed. Refer to BNF for Children for further details.

Adults: Apply to the affected area as directed, typically 1-3 times weekly depending on the condition being treated. Refer to specific product guidelines for detailed dosing.

Mechanism of action

Benzalkonium chloride exerts its antimicrobial effect by disrupting the cell membrane of microorganisms, leading to leakage of cellular contents and ultimately cell death. This is facilitated by its cationic nature, which allows it to bind to negatively charged bacterial surfaces.

Pharmacodynamics

Benzalkonium chloride demonstrates rapid bactericidal activity, with effectiveness observed against gram-positive and gram-negative bacteria, fungi, and some viruses. Its antiseptic properties may be enhanced in the presence of moisture and are typically influenced by the concentration of the solution used.

Pharmacokinetics

Benzalkonium chloride is poorly absorbed through the skin. After topical application, it remains primarily at the site of application, where it exerts localized effects. Systemic absorption is minimal, and it is primarily eliminated through the skin and urine. However, specific pharmacokinetic data may vary based on formulation and application site.

Pregnancy

Benzalkonium chloride should be used with caution during pregnancy. Refer to specific guidelines or consult a healthcare professional.

Breast-feeding

Benzalkonium chloride should be used with caution while breastfeeding. Refer to specific guidelines or consult a healthcare professional.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Shampoo
• Soap or detergent
• Topical solution

Indications

• Disinfection of surfaces
• Antiseptic for skin
• Preservative in pharmaceuticals
• Treatment of minor cuts and abrasions

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations in pediatric populations.

Adults: Refer to the BNF for specific formulations and concentrations as doses may vary based on the application and preparation.

Mechanism of action

The bactericidal action of benzalkonium chloride is believed to result from the disruption of intermolecular interactions, which leads to the dissociation of cellular membrane lipid bilayers in bacteria. This disruption compromises cellular permeability, causing leakage of vital cellular contents. Moreover, the agent can deactivate important molecular complexes such as enzymes that regulate various respiratory and metabolic activities within the cells. Cationic surfactants like benzalkonium chloride can thus effectively disrupt critical intermolecular interactions and tertiary structures in biochemical systems, impairing bacterial function.

Pharmacodynamics

Benzalkonium chloride is classified as a biocidal agent with a relatively long duration of action. It exhibits a spectrum of activity against various microorganisms, including bacteria, certain viruses, fungi, and protozoa; however, it is ineffective against bacterial spores. The agent tends to demonstrate greater efficacy against gram-positive bacteria compared to gram-negative ones. The mode of action can be bacteriostatic (preventing growth) or bactericidal (killing bacteria), depending on its concentration. The activity of benzalkonium chloride is generally stable across different pH levels but is enhanced at elevated temperatures and with extended exposure.

Pharmacokinetics

The pharmacokinetic properties of benzalkonium chloride, including absorption, distribution, metabolism, and excretion, are not fully characterized. Its topical application limits systemic exposure, and it primarily exerts localized effects at the site of application. The duration of action and efficacy may be influenced by the formulation and concentration used.

Pregnancy

Benzalkonium chloride is generally considered safe for use during pregnancy when applied topically, but systemic absorption should be minimized. Always consult a healthcare provider for use during pregnancy.

Breast-feeding

Benzalkonium chloride is considered safe for topical application during breastfeeding, but care should be taken to avoid exposure to the infant. Consultation with a healthcare provider is recommended.

Storage

Store at room temperature, away from moisture and heat. Keep in a tightly closed container, protected from light.

Formulations

• Topical solution
• Disinfectant wipes
• Liquid antiseptics

Indications

• Vulvovaginal candidiasis
• Fungal infections
• Antiseptic for minor cuts and abrasions
• Ocular antiseptic
• Insecticide in pest control

Dosage

Adults: Refer to specific guidelines for formulations. Commonly used as a 2-3% solution

Mechanism of action

Boric acid exerts its antifungal effects by disrupting the cell membrane integrity of fungi. It interferes with the synthesis of essential cellular components, leading to cell lysis and death. The acid also has mild antibacterial properties, which can help in reducing bacterial load in infected areas. The exact molecular pathways involved in these actions are not fully elucidated, but it is known to alter the pH of the environment, making it less conducive for fungal growth.

Pharmacodynamics

Boric acid demonstrates a low toxicity profile in humans when used appropriately. Its antifungal activity is primarily effective against Candida species, and it can be used as a second-line treatment for vulvovaginal candidiasis, particularly in cases of recurrent infections. The effectiveness of boric acid is also attributed to its ability to maintain an acidic environment, which is unfavorable for the growth of many pathogens. Its antiseptic properties help in reducing inflammation and promoting healing in infected tissues.

Pharmacokinetics

Boric acid is poorly absorbed through the gastrointestinal tract but can be absorbed through the skin and mucous membranes. Once absorbed, it is distributed throughout the body, with a tendency to accumulate in various tissues, including the liver and kidneys. The elimination half-life of boric acid is variable, depending on dosage and route of administration. It is primarily excreted unchanged in the urine. Due to its potential for toxicity with high systemic exposure, it is important to adhere to recommended dosages.

Contra-indications

• Hypersensitivity to boron or any component of the formulation
• Severe renal impairment

Adverse effects

• Skin irritation or rash
• Nausea
• Vomiting
• Diarrhea
• Headache
• Fatigue
• Tremors
• Confusion

Interactions

• May interact with other topical medications
• Caution with nephrotoxic agents

Precautions

• Use with caution in patients with renal insufficiency
• Careful monitoring is advised in long-term use
• Not recommended for use in large areas of broken skin

Pregnancy

Boric acid is classified as category C. Use during pregnancy only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Limited data available. It is advisable to avoid use while breastfeeding.

Storage

Store in a cool, dry place away from light. Keep out of reach of children.

Formulations

• Topical ointment
• Powder
• Solution

Indications

• Electrolyte replacement
• Volume expansion in hypovolemic patients
• Management of hyponatremia
• Support in intravenous fluid therapy

Dosage

Children: Refer to the BNF for Children for appropriate dosing in paediatric patients, as dosages may vary based on the formulation and clinical condition.

Adults: Refer to specific product information or clinical guidelines for dosage recommendations, as disodium is often part of combination products.

Mechanism of action

Disodium compounds often function by providing sodium ions that are essential for various physiological processes. Sodium ions play a critical role in maintaining osmotic balance, nerve impulse transmission, and muscle contraction. In the context of intravenous solutions, disodium helps to restore electrolyte balance in patients.

Pharmacodynamics

The pharmacodynamics of disodium is primarily related to its role in electrolyte balance and fluid homeostasis. Sodium ions are vital for the function of excitable tissues, including neurons and muscle cells. Changes in sodium levels can affect blood pressure, hydration status, and overall cellular function.

Pharmacokinetics

The pharmacokinetics of disodium compounds depend on their specific formulation and route of administration. When administered intravenously, disodium is rapidly distributed in the extracellular fluid, where it helps to maintain osmotic pressure. Sodium is primarily excreted by the kidneys, and its levels can be influenced by fluid intake, dietary sodium, and renal function.

Pregnancy

Use with caution. Consult a healthcare provider for specific guidance.

Breast-feeding

Use with caution. Consult a healthcare provider for specific guidance.

Storage

Store at room temperature, away from moisture and direct sunlight.

Indications

• Lead poisoning
• Mercury poisoning
• Calcium overload
• Certain diagnostic procedures involving heavy metals

Dosage

Children: Refer to the BNF for Children for appropriate dosing information tailored for paediatric patients.

Adults: Refer to the BNF for specific dosing guidelines based on the condition being treated, considering factors such as the severity of metal poisoning and renal function.

Mechanism of action

Edetate functions by forming stable complexes with divalent and trivalent metal ions, including lead and calcium, through its multiple carboxylate and amine groups. This chelation renders the metals more soluble and promotes their renal excretion, thereby reducing their toxic effects in the body.

Pharmacodynamics

The chelation of metals by edetate decreases the free metal concentration in the bloodstream, which mitigates the toxic effects associated with heavy metal accumulation. The efficacy of edetate in removing metals such as lead has been well documented, and its ability to bind calcium can influence calcium homeostasis in certain clinical scenarios.

Pharmacokinetics

Edetate is administered intravenously, with rapid distribution throughout the extracellular fluid. It is primarily excreted unchanged by the kidneys. The onset of action occurs quickly after administration, and the duration depends on the dose and the patient's renal function. The elimination half-life is approximately 1 hour but may vary based on renal clearance.

Contra-indications

• Hypersensitivity to edetate or any component of the formulation
• Severe renal impairment
• Active bleeding disorders

Adverse effects

• Hypocalcemia
• Nausea
• Vomiting
• Diarrhea
• Abdominal pain
• Headache
• Rash
• Fever

Interactions

• May enhance the effects of anticoagulants
• Concurrent use with calcium supplements may reduce effectiveness
• May interfere with the absorption of certain medications due to changes in gastrointestinal motility

Precautions

• Use with caution in patients with renal impairment
• Monitor electrolyte levels, particularly calcium, during treatment
• Assess the patient's hydration status before administration

Pregnancy

Limited data on the use of edetate in pregnancy. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Caution is advised as it is not known whether edetate is excreted in human milk. Weigh the risks and benefits before use.

Storage

Store in a cool, dry place, protected from light. Do not freeze.

Formulations

• Edetate disodium injection
• Edetate calcium disodium injection

Indications

• Pain management
• Vaccination
• Antibiotic therapy
• Hormonal therapies
• Anesthesia
• Nutritional support
• Chemotherapy

Dosage

Children: Refer to specific drug guidelines for paediatric dosing, as it requires careful consideration of weight and age.

Adults: Refer to specific drug guidelines for adult dosing, as it varies widely depending on the medication and clinical condition.

Mechanism of action

The mechanism of action of injected drugs varies widely based on the specific medication being administered. Generally, injected drugs enter the bloodstream directly, allowing them to circulate rapidly throughout the body. For instance, antibiotics may work by inhibiting bacterial cell wall synthesis, while analgesics may modulate pain pathways in the central nervous system. Each drug has unique pathways through which it achieves its therapeutic effects.

Pharmacodynamics

Pharmacodynamics refers to the effects of drugs on the body and their mechanisms of action. For injectable medications, effects can be immediate or delayed, depending on the drug's formulation and route of administration. Factors influencing pharmacodynamics include receptor affinity, drug concentration, and the presence of other substances that may enhance or inhibit the drug's effects. For example, some injectable drugs may require specific receptors to exert their effects, while others may have a broader range of action.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of injected drugs. After administration, drugs are rapidly absorbed into the bloodstream, leading to quick therapeutic effects. The distribution depends on factors such as blood flow, tissue permeability, and protein binding. Drugs are metabolized primarily in the liver and excreted through the kidneys or bile. The pharmacokinetic profile can vary widely based on the drug's chemical nature, dosage, and individual patient factors.

Pregnancy

Safety during pregnancy depends on the specific injection and its active ingredients. It is essential to consult a healthcare professional for guidance.

Breast-feeding

The safety of injections during breastfeeding varies by the specific medication. It is recommended to seek advice from a healthcare provider.

Storage

Store injections as per manufacturer's guidelines, usually in a cool, dry place away from direct sunlight. Some may require refrigeration.

Indications

• Food preservation
• Antioxidant in pharmaceuticals
• Treatment of certain conditions related to sulfite sensitivity

Dosage

Children: Refer to BNF for Children for appropriate paediatric dosing guidelines.

Adults: Refer to specific formulations and clinical guidelines for appropriate dosing, as it varies based on the condition being treated.

Mechanism of action

Metabisulfite acts primarily as a reducing agent, which means it can donate electrons to other compounds, thereby preventing their oxidation. This property is utilized in food preservation and in various chemical reactions. The compound participates in metabolic pathways such as the thiosulfate oxidation and sulfur oxidation pathways, suggesting its role in sulfur metabolism within certain organisms.

Pharmacodynamics

Metabisulfite's pharmacodynamics involve its role as an antioxidant and a preservative. By preventing the oxidation of sensitive compounds, it helps maintain the stability and efficacy of pharmaceuticals and food products. However, it can also induce allergic reactions in sensitive individuals, particularly in those with asthma.

Pharmacokinetics

Metabisulfite is rapidly absorbed when ingested and is metabolized in the body to sulfate, which is then excreted via the kidneys. Its half-life and specific pharmacokinetic parameters can vary based on the route of administration and individual patient factors.

Indications

• Used as an emulsifier in pharmaceutical formulations
• Facilitates the solubilization of hydrophobic drugs
• Commonly included in vaccines to enhance efficacy and stability
• Acts as a stabilizer in food and cosmetic products

Dosage

Children: Refer to specific formulation guidelines for paediatric dosing, as polysorbate 80 is typically used in small amounts as an excipient.

Adults: Refer to specific formulation guidelines for adult dosing, as polysorbate 80 is typically used in small amounts as an excipient.

Mechanism of action

Polysorbate 80 functions by reducing the surface tension between two immiscible phases, such as oil and water. It contains both hydrophilic (water-attracting) and lipophilic (fat-attracting) components, which allows it to stabilize emulsions by preventing the coalescence of dispersed droplets. This mechanism enhances the bioavailability of hydrophobic substances by improving their solubility in aqueous environments.

Pharmacodynamics

As a surfactant, polysorbate 80 can improve the absorption and bioavailability of co-administered drugs by enhancing their solubility. Its ability to modify membrane permeability can also affect drug delivery and release profiles. However, polysorbate 80 is generally considered non-toxic at typical concentrations used in formulations.

Pharmacokinetics

Polysorbate 80 is not extensively absorbed through the gastrointestinal tract and is primarily eliminated through feces. It may undergo limited metabolism, with some hydrolysis occurring in the body. Due to its large molecular weight, it does not readily cross biological membranes. The pharmacokinetics can vary depending on the formulation and administration route, such as oral, intravenous, or topical.

Adverse effects

• Hypersensitivity reactions
• Gastrointestinal disturbances
• Injection site reactions
• Headache

Precautions

• Use with caution in patients with known allergies to polysorbates
• Monitor for hypersensitivity reactions, especially in parenteral formulations

Pregnancy

Polysorbate 80 is generally considered safe for use during pregnancy, but it should be used only if clearly needed.

Breast-feeding

Polysorbate 80 is considered safe during breastfeeding, as it is unlikely to affect the nursing infant.

Storage

Store in a cool, dry place, protected from light. Follow specific manufacturer's storage instructions for formulations.

Formulations

• Injectable solution
• Oral liquid
• Topical cream

Mechanism of action

When administered rectally, glycerin exerts a hygroscopic and/or local irritant action, drawing water from the tissues into the feces and reflexively stimulating evacuation. Glycerin decreases intraocular pressure by creating an osmotic gradient between the blood and intraocular fluid, causing fluid to move out of the aqueous and vitreous humors into the bloodstream. Glycerin (glycerol) and sorbitol are hyperosmotic laxatives. When administered rectally, glycerin and sorbitol exert a hygroscopic and/or local irritant action, drawing water from the tissues into the feces and reflexly stimulating evacuation. The extent to which the simple physical distention of the rectum and the hygroscopic and/or local irritant actions are responsible for the laxative effects of some of these drugs is not known. Only extremely high oral doses of sorbitol (25 g daily) or glycerin exert laxative action. /Glycerin/ decreases intraocular pressure by creating an osmotic gradient between the blood and intraocular fluid, causing fluid to move out of the aqueous and vitreous humors into the bloodstream. The physicochemical effects of a series of alkanols, alkanediols and glycerol on erythrocyte shape and hemolysis at 4 and 20 degrees C were examined. We calculated the dielectric constant of the incubation medium, Ds, and the dielectric constant of the erythrocyte membrane Dm in the presence of organic solutes. The ratio Ds/Dm = -38.48 at 20 degrees C defines the normal biconcave shape in a medium without hemolytic agents. A decrease in Ds/Dm favors externalization or internalization with consequent hemolysis. Alkanols and alkanediols convert biconcave erythrocytes into echinocytes, which is accompanied by an increase in the projected surface area. Glycerol converts biconcave erythrocytes into stomatocytes, which was accompanied by a marginal decrease in the projected surface area. Progressive externalization in alkanols and alkanediols or internalization in glycerol resulted in a decrease in the projected surface area and the formation of smooth spheres. The degree of shape change induced was related to the degree of hemolysis and the ratio Ds/Dm. A decrease in temperature reduced both the degree of shape change and hemolysis. .../Thus/ physicochemical toxicity may be a result of a temperature dependent hydrophobic interaction between the organic solutes and the membrane and is best interpreted by the ability of the solutes to change Ds and Dm.

Pharmacodynamics

Glycerin is commonly classified as an osmotic laxative but may act additionally or alternatively through its local irritant effects; it may also have lubricating and fecal softening actions. Glycerin suppositories usually work within 15 to 30 minutes.

Mechanism of action

The short-term effects of corticosteroids are decreased vasodilation and permeability of capillaries, as well as decreased leukocyte migration to sites of inflammation. Corticosteroids binding to the glucocorticoid receptor mediates changes in gene expression that lead to multiple downstream effects over hours to days. Glucocorticoids inhibit neutrophil apoptosis and demargination; they inhibit phospholipase A2, which decreases the formation of arachidonic acid derivatives; they inhibit NF-Kappa B and other inflammatory transcription factors; they promote anti-inflammatory genes like interleukin-10. Lower doses of corticosteroids provide an anti-inflammatory effect, while higher doses are immunosuppressive. High doses of glucocorticoids for an extended period bind to the mineralocorticoid receptor, raising sodium levels and decreasing potassium levels. Following topical application, corticosteroids produce anti-inflammatory, antipruritic, and vasoconstrictor actions. The activity of the drugs is thought to result at least in part from binding with a steroid receptor. Corticosteroids decrease inflammation by stabilizing leukocyte lysosomal membranes, preventing release of destructive acid hydrolases from leukocytes; inhibiting macrophage accumulation in inflamed areas; reducing leukocyte adhesion to capillary endothelium; reducing capillary wall permeability and edema formation; decreasing complement components; antagonizing histamine activity and release of kinin from substrates; reducing fibroblast proliferation, collagen deposition, and subsequent scar tissue formation; and possibly by other mechanisms as yet unknown. Corticosteroids, especially the fluorinated corticosteroids, have antimitotic activity on cutaneous fibroblasts and the epidermis. /Corticosteroids/ Reactive oxygen species (ROS) generation by polymorphonuclear leukocytes (PMNL) and mononuclear cells (MNC) is inhibited following the intravenous administration of hydrocortisone. This is associated with a parallel decrease in intranuclear NFkappaB, known to modulate inflammatory responses including ROS generation. Plasma levels of interleukin-10 (IL-10), an anti-inflammatory and immunosuppressive cytokine produced by TH2 cells, are also increased after hydrocortisone administration. In this study, we have investigated the effect of hydrocortisone on p47(phox) subunit, a key component of nicotinamide adenine dinucleotide phosphate (NADPH) oxidase, in MNC and the pharmacodynamics of this effect with ROS generation and plasma IL-10 levels /were investigated/. p47(phox) subunit protein levels in MNC showed a progressive decrease after hydrocortisone administration. It reached a nadir at 4 hours and increased thereafter to a baseline level at 24 hours. ROS generation also decreased, reached a nadir between 2 and 4 hours, and returned to a baseline level at 24 hours. IL-10 concentrations increased, peaked at 4 hours, and reverted to the baseline levels at 24 hours. In conclusion, p47(phox) subunit suppression may contribute to the inhibition of ROS generation in MNC after hydrocortisone administration. This suppression occurs in parallel with the suppression of NFkappaB and an increase in IL-10 plasma levels. Therefore, it would appear that the decrease in intranuclear NFkappaB and an increase in IL-10 may cause the inhibitory modulation on p47(phox) subunit and ROS generation by MNC following hydrocortisone and other glucocorticoids.

Pharmacodynamics

Hydrocortisone binds to the glucocorticoid receptor leading to downstream effects such as inhibition of phospholipase A2, NF-kappa B, other inflammatory transcription factors, and the promotion of anti-inflammatory genes. Hydrocortisone has a wide therapeutic index and a moderate duration of action. Patients should stop taking the medication if irritation or sensitization occurs.

Mechanism of action

Although not entirely elucidated, the bactericidal action of benzalkonium chloride is believed to be due to the disruption of intermolecular interactions. Such disruption can cause the dissociation of cellular membrane lipid bilayers of bacteria, resulting in compromised cellular permeability control and the leakage of important cellular contents. Additionally, other important molecular complexes like enzymes which control the maintenance of a great range of respiratory and metabolic cellular activities, are also susceptible to such deactivation. Consequently, a variety of critical intermolecular interactions and tertiary structures in very highly specific biochemical systems that allow bacterial agents to function normally can be readily disrupted or deactivated by cationic surfactants like benzalkonium chloride..

Pharmacodynamics

Benzalkonium chloride solutions are generally categorized as biocidal agents with relative long durations of action. Their spectrum of activity has been demonstrated against bacteria, to some viruses, fungi, and protozoa, although bacterial spores are treated as being resistant to the agent. Additionally, the agent generally shows more activity against gram-positive than gram-negative bacteria. Finally, solutions of benzalkonium chloride are bacteriostatic or bactericidal based on their concentration. Bacteriostatic agents act to prevent further growth of bacterial organisms that are present while bactericidal agents function to kill bacteria that are present. In general, the activity of the agent is not largely affected by pH, but such activity does increase substantially at higher temperatures and prolonged exposure times.