Koact 1000

Indications

• Bacterial infections
• Urinary tract infections
• Sinusitis
• Uncomplicated community-acquired pneumonia
• Salmonellosis
• Oral infections
• Lyme disease (under expert supervision)
• Acute exacerbation of bronchiectasis
• Anthrax (treatment and post-exposure prophylaxis)

Dosage

Children: 1 month–11 years: 30 mg/kg 3 times a day for 21 days; children 1–4 years: 250 mg 3 times a day; children 5–11 years: 500 mg 3 times a day.

Adults: 500 mg 3 times a day; increased if necessary up to 1 g 3 times a day in severe infections.

Mechanism of action

Amoxicillin works by inhibiting bacterial cell wall synthesis, leading to cell lysis and death. It binds to penicillin-binding proteins (PBPs) located inside the bacterial cell wall, interfering with the transpeptidation process necessary for cell wall integrity.

Pharmacodynamics

Amoxicillin exhibits bactericidal activity against susceptible bacteria. Its action is time-dependent, meaning that its effectiveness is related to the duration of time that the drug concentration remains above the minimum inhibitory concentration (MIC) for the target pathogen.

Pharmacokinetics

Amoxicillin is well absorbed from the gastrointestinal tract, with peak plasma concentrations achieved within 1-2 hours after oral administration. It is widely distributed in body tissues and fluids, and it is excreted primarily via the kidneys. The elimination half-life is approximately 1 hour, and renal impairment may necessitate dosage adjustments.

Adverse effects

• Skin rash
• Gastrointestinal disturbances (nausea, vomiting, diarrhea)
• Allergic reactions (including anaphylaxis)
• Superinfection (due to resistant organisms)

Interactions

• Allopurinol (increases risk of skin rash)

Precautions

• History of penicillin allergy
• Renal impairment (reduce dose)
• Use with caution in patients with mononucleosis

Pregnancy

Use only if clearly needed; no adequate studies in pregnant women.

Breast-feeding

Amoxicillin is excreted in breast milk; use with caution.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Phenoxymethylpenicillin 250mg/5ml oral solution
• Phenoxymethylpenicillin 250 mg tablets

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Bacterial infections caused by beta-lactamase producing organisms
• Community-acquired pneumonia
• Respiratory tract infections
• Urinary tract infections
• Skin and soft tissue infections

Dosage

Children: Paediatric dosing of clavulanate should be determined based on the specific indication and the formulation used. Refer to the BNF for

Adults: The usual adult dose of clavulanate varies depending on the specific antibiotic it is combined with, generally ranging from 125 mg to 250 mg, taken every 8 hours when combined with amoxicillin.

Mechanism of action

Clavulanate works by irreversibly binding to the active site of beta-lactamase enzymes. By inhibiting these enzymes, clavulanate protects beta-lactam antibiotics from degradation, allowing them to exert their antibacterial effects effectively. This mechanism enhances the spectrum of activity of the co-administered antibiotic, thereby improving clinical outcomes in infections caused by beta-lactamase producing organisms.

Pharmacodynamics

Clavulanate exhibits a time-dependent antibacterial effect, characterized by its ability to maintain effective concentrations against beta-lactamase producing bacteria. Its pharmacodynamic properties are mainly influenced by its interaction with beta-lactam antibiotics, enhancing their efficacy in treating infections. The overall effect is a synergistic relationship that increases the potency of the antibiotic treatment.

Pharmacokinetics

Clavulanate is usually administered orally or parenterally, and it is rapidly absorbed from the gastrointestinal tract. It reaches peak plasma concentrations within 1 to 2 hours after administration. The drug is widely distributed in body tissues, with a volume of distribution indicative of good tissue penetration. Clavulanate undergoes hepatic metabolism, primarily by conjugation, and is excreted largely in the urine as metabolites. The elimination half-life is approximately 1 hour, necessitating frequent dosing for optimal therapeutic effect.

Contra-indications

• Hypersensitivity to clavulanate or any component of the formulation
• History of jaundice or hepatic impairment related to previous use of beta-lactam antibiotics

Adverse effects

• Diarrhea
• Nausea
• Vomiting
• Rash
• Hepatic dysfunction
• Allergic reactions

Interactions

• Probenecid may increase concentrations of clavulanate
• Anticoagulants may have altered effects due to changes in gut flora

Precautions

• Monitor liver function during prolonged therapy
• Use cautiously in patients with renal impairment
• Assess for history of allergy to penicillins or cephalosporins

Pregnancy

Clavulanate is classified as category B. Animal studies have not shown teratogenic effects, but adequate and well-controlled studies in pregnant women are lacking.

Breast-feeding

Clavulanate is excreted in breast milk. Caution is advised when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct light. Keep out of reach of children.

Formulations

• Clavulanate potassium 125 mg/5 mL
• Clavulanate potassium 250 mg/5 mL

Indications

• Infections caused by beta-lactamase-producing bacteria
• Acute bacterial sinusitis
• Acute otitis media
• Lower respiratory tract infections
• Urinary tract infections

Dosage

Children: Refer to the BNF for Children for specific dosing according to age and weight; adjustments may be necessary based on the clinical scenario.

Adults: Refer to specific product guidelines for dosing; typical regimens depend on the combination antibiotic used and the severity of the infection.

Mechanism of action

Clavulanic acid works by irreversibly binding to the active site of beta-lactamase enzymes that are produced by certain bacteria to inactivate beta-lactam antibiotics. By inhibiting these enzymes, clavulanic acid protects the penicillin antibiotic from degradation, allowing it to exert its antibacterial effects.

Pharmacodynamics

Clavulanic acid has a synergistic effect when combined with other antibiotics, particularly amoxicillin. The presence of clavulanic acid allows for the effective treatment of infections caused by bacteria that would otherwise be resistant to penicillins. Its antibacterial activity is generally weak on its own but significantly enhances the efficacy of other beta-lactam antibiotics.

Pharmacokinetics

Clavulanic acid is rapidly absorbed after oral administration, with peak plasma concentrations occurring within 1 hour. It is widely distributed throughout the body and has a half-life of approximately 1 hour. The drug is primarily excreted unchanged in the urine. In the presence of renal impairment, dosage adjustment may be necessary, as the elimination of clavulanic acid can be affected.

Contra-indications

• Hypersensitivity to clavulanic acid or any of the excipients
• History of jaundice or hepatic impairment associated with previous use of penicillins or beta-lactam antibiotics

Adverse effects

• Nausea
• Diarrhea
• Rash
• Elevated liver enzymes
• Allergic reactions including anaphylaxis
• Superinfection

Interactions

• May enhance the effects of anticoagulants such as warfarin
• Probenecid may increase plasma concentrations of clavulanic acid
• May reduce the efficacy of oral contraceptives

Precautions

• Caution in patients with renal impairment
• Monitor liver function in patients receiving prolonged therapy
• Use with caution in patients with a history of allergic reactions to beta-lactams

Pregnancy

Clavulanic acid is categorized as pregnancy category B. Animal studies have not shown any harm to the fetus, but there are no adequate and well-controlled studies in pregnant women.

Breast-feeding

Clavulanic acid is excreted in breast milk, but it is generally considered safe for use during breastfeeding. Monitor for potential effects in the infant.

Storage

Store at room temperature, away from moisture and heat. Protect from light. Keep out of reach of children.

Formulations

• Oral tablets
• Oral suspension
• Injectable forms

Indications

• Ethylene glycol poisoning
• Metabolic acidosis due to glycolate accumulation

Dosage

Adults: Refer to the BNF for specific dosing guidance in cases of eth

Mechanism of action

Glycollate is produced during the metabolic breakdown of ethylene glycol. The toxicity associated with ethylene glycol arises from its conversion to glycolic acid, leading to an accumulation of glycolate and other metabolites. This metabolic pathway results in metabolic acidosis and potential renal damage due to the accumulation of toxic metabolites. The exact elimination kinetics of glycolate and the associated metabolites are not fully understood, but their presence in the body contributes to the toxicological profile observed during ethylene glycol poisoning.

Pharmacodynamics

The pharmacodynamics of glycollate involves its contribution to the toxic effects seen in ethylene glycol metabolism. Glycollate, along with glycolic acid, can lead to metabolic acidosis, affecting the body's acid-base balance. The compound induces diuresis, but this effect is transient, and the accumulation of glycolate can have deleterious effects on renal function and overall metabolic status. The clinical implications of glycollate toxicity necessitate prompt identification and treatment to mitigate its effects.

Pharmacokinetics

The pharmacokinetics of glycollate are characterized by its formation through the metabolism of ethylene glycol. After administration, ethylene glycol reaches peak plasma levels within 2 hours, while glycolate peaks between 4-6 hours. The elimination half-life of ethylene glycol is approximately 1.7 hours in rats and 3.4 hours in dogs. Renal excretion plays a significant role in the elimination of both ethylene glycol and glycolate, with approximately 20-30% and 5% of the dose excreted renally, respectively. The metabolic pathways for glycollate suggest a slower rate of elimination compared to ethylene glycol.

Indications

• Methemoglobinemia
• Urinary tract infections
• Laboratory staining agent

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations based on the condition being treated.

Adults: Refer to the BNF for specific dosing recommendations based on the condition being treated.

Mechanism of action

Methylene blue acts as a reducing agent that facilitates the conversion of methemoglobin back to hemoglobin. It does this by donating electrons to the ferric ion in methemoglobin, reducing it to ferrous iron, which restores the molecule's ability to transport oxygen. It also has mild monoamine oxidase inhibitor activity, affecting neurotransmitter metabolism.

Pharmacodynamics

Methylene blue exhibits a variety of pharmacodynamic effects, primarily through its action on hemoglobin. By reducing methemoglobin levels, it improves oxygen delivery to tissues. Additionally, it has been noted to possess properties such as antimicrobial activity and potential neuroprotective effects in certain contexts. The overall effect is a restoration of normal oxygen transport and metabolism.

Pharmacokinetics

Methylene blue is rapidly absorbed after intravenous administration, with peak plasma concentrations occurring shortly after dosing. It is distributed widely in body tissues, including the liver and kidneys. The drug undergoes hepatic metabolism, primarily by the cytochrome P450 system, and is excreted mainly in the urine as metabolites. The elimination half-life is approximately 5 to 6 hours, but this can vary depending on dosage and patient factors.

Pregnancy

Safety in pregnancy has not been established.

Breast-feeding

There is no information available regarding its excretion in human milk.

Storage

Store in a well-closed container in a cool, dry place.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Indications

• Hyperthyroidism
• Graves' disease
• Thyroid storm

Dosage

Children: Refer to the BNF

Adults: The usual initial dose of propylthiouracil in adults is 300 mg per day, divided into 3 doses. The maintenance dose is typically 100-150 mg per day, adjusted based on thyroid function tests.

Mechanism of action

Propylthiouracil acts by inhibiting the enzyme thyroid peroxidase, which is involved in the iodination of tyrosine residues in thyroglobulin, a precursor of thyroid hormones. By blocking this enzyme, PTU reduces the production of thyroxine (T4) and triiodothyronine (T3), leading to decreased thyroid hormone levels in circulation. Additionally, PTU inhibits the conversion of T4 to T3 in peripheral tissues, further contributing to its antithyroid effects.

Pharmacodynamics

The pharmacodynamic effects of propylthiouracil are primarily centered around its ability to lower thyroid hormone levels, which helps alleviate symptoms of hyperthyroidism such as increased heart rate, weight loss, and anxiety. The onset of action can vary, but therapeutic effects may be observed within several weeks of initiation. Monitoring thyroid function tests is essential to assess the efficacy and adjust dosing as needed.

Pharmacokinetics

Propylthiouracil is well absorbed from the gastrointestinal tract, though its bioavailability can be affected by factors such as food intake. The drug is extensively metabolized in the liver, and its elimination half-life averages around 1-2 hours. Most of the drug is excreted in urine as metabolites. It is important to note that due to its rapid metabolism, multiple daily doses may be required to maintain therapeutic levels.

Interactions

• propylthiouracil+metyrapone: Severe (decreases effects)

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Nutritional supplementation
• Energy source in enteral nutrition
• Excipient in pharmaceutical formulations

Dosage

Children: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Adults: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Mechanism of action

Starch is broken down into glucose units by enzymes such as amylase during digestion. The glucose is then absorbed in the intestines and utilized for energy production in the body's cells. This pathway involves hydrolysis of the glycosidic bonds, converting starch into simpler sugars.

Pharmacodynamics

Starch primarily serves as an energy source. Its digestion and absorption lead to an increase in blood glucose levels, which provides energy for metabolic processes. In this context, it plays a crucial role in maintaining energy homeostasis in the body.

Pharmacokinetics

Starch is not absorbed in its polymeric form; it must first be enzymatically hydrolyzed into simpler sugars such as maltose and glucose. The digestion and absorption of starch occur predominantly in the small intestine, with glucose being readily absorbed into the bloodstream. The rate of absorption can vary depending on the type of starch and its physical form.

Adverse effects

• Allergic reactions
• Gastrointestinal discomfort
• Diarrhea
• Constipation

Precautions

• Use with caution in individuals with known allergies to starch or starch derivatives
• Monitor for gastrointestinal symptoms in patients with a history of digestive disorders

Pregnancy

Starch is generally considered safe for use during pregnancy. However, it should be consumed in moderation as part of a balanced diet.

Breast-feeding

Starch is deemed safe for nursing mothers when used in moderation as part of a balanced diet.

Storage

Store in a cool, dry place away from moisture and direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Suspensions

Dosage

Children: Refer to the BNF for Children for appropriate paediatric dosing information.

Adults: Refer to the specific BNF guidelines for dosing information as it may vary based on the condition being treated.

Mechanism of action

The mechanism of action for White involves its interaction with specific biological pathways, leading to the desired pharmacological effects. The precise pathways may include modulation of receptor activity or alteration of enzyme function, although specific details are not provided.

Pharmacodynamics

Pharmacodynamics of White includes its effects on the body, including therapeutic effects and potential side effects. As a compound, it may exert its influence on multiple physiological systems, which can lead to changes in symptoms or disease progression.

Pharmacokinetics

Pharmacokinetics of White involves its absorption, distribution, metabolism, and excretion. Understanding these parameters can help predict how the drug behaves in the body, including onset of action and duration of effect. Detailed pharmacokinetic data is not specified.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Amoxicillin competitively inhibits penicillin-binding protein 1 and other high molecular weight penicillin binding proteins. Penicillin bind proteins are responsible for glycosyltransferase and transpeptidase reactions that lead to cross-linking of D-alanine and D-aspartic acid in bacterial cell walls. Without the action of penicillin binding proteins, bacteria upregulate autolytic enzymes and are unable to build and repair the cell wall, leading to bacteriocidal action. The penicillins and their metabolites are potent immunogens because of their ability to combine with proteins and act as haptens for acute antibody-mediated reactions. The most frequent (about 95 percent) or "major" determinant of penicillin allergy is the penicilloyl determinant produced by opening the beta-lactam ring of the penicillin. This allows linkage of the penicillin to protein at the amide group. "Minor" determinants (less frequent) are the other metabolites formed, including native penicillin and penicilloic acids. /Penicillins/ Amoxicillin is similar to penicillin in its bactericidal action against susceptible bacteria during the stage of active multiplication. It acts through the inhibition of cell wall biosynthesis that leads to the death of the bacteria.

Pharmacodynamics

Amoxicillin competitively inhibit penicillin binding proteins, leading to upregulation of autolytic enzymes and inhibition of cell wall synthesis. Amoxicillin has a long duration of action as it is usually given twice daily. Amoxicillin has a wide therapeutic range as mild overdoses are not associated with significant toxicity. Patients should be counselled regarding the risk of anaphylaxis, _Clostridium difficile_ infections, and bacterial resistance.

Mechanism of action

Ethylene glycol toxicity results from its metabolism to glycolic acid and other toxic metabolites. The accumulation of glycolate and the elimination kinetics of ethylene glycol and its metabolites are not well understood, so studies with male Sprague-Dawley rats and mixed breed dogs have been carried out. Ethylene glycol was administered by gavage to rats and dogs which were placed in metabolic cages for urine and blood sample collection at timed intervals. The peak plasma level of ethylene glycol occurred at 2 hr after dosing and that of glycolate between 4-6 hr. The rate of ethylene glycol elimination was somewhat faster in rats with a half-life of 1.7 hr compared to 3.4 hr in dogs. The maximum plasma level of glycolate was greater in rats although the pattern of accumulation was similar to that in dogs. Glycolate disappeared from the plasma at the same time as ethylene glycol, suggesting a slower rate of elimination of the metabolite than that of ethylene glycol. Renal excretion of ethylene glycol was an important route for its elimination accounting for 20-30% of the dose. Renal excretion of glycolate represented about 5% of the dose. Ethylene glycol induced an immediate, but short lived diuresis compared to that in control rats. Minimal clinical effects (mild acidosis with no sedation) were noted at these doses of ethylene glycol (1-2 g/kg) in both rats and dogs. The results indicate that the toxicokinetics of ethylene glycol and glycolate were similar in both species. The effect of 0.35 to 0.8 mmol/kg glycolic acid and 1.0 to 4.4 mmol/kg sodium glycolate on cyclopropane-epinephrine induced cardiac arrhythmias was examined using dogs. Doses of 0.35 to 0.5 mmol/kg glycolic acid increased the duration of arrhythmias in the 13 dogs tested, whereas doses >0.5 mmol/kg decreased or totally eliminated the arrhythmias in each of 11 dogs. Depression was observed for many of the dogs at higher doses. Sodium glycolate was much less effective in decreasing the arrhythmias, with 3 mmol/kg being required and its action being transient.