Oleptiss 180mg

Indications

• Chronic iron overload due to repeated blood transfusions
• Thalassemia major
• Aplastic anemia
• Sideroblastic anemia

Dosage

Children: For children aged 2 years and above, the initial dose is typically 20 mg/kg once daily, adjusted according to serum ferritin levels. Maximum recommended daily dose is 40 mg/kg.

Adults: Initially 20 mg/kg once daily, adjusted based on serum ferritin levels and clinical response. Maximum dose should not exceed 40 mg/kg daily.

Mechanism of action

Deferasirox binds trivalent (ferric) iron with high affinity, forming a stable complex that is eliminated via the kidneys. It acts as a tridentate ligand, binding iron in a ratio of 2:1, which effectively lowers iron levels in the body. Deferasirox also impacts nuclear factor-kappaB, a key regulator of various cellular processes, which may contribute to its therapeutic effects in certain hematological conditions.

Pharmacodynamics

Deferasirox selectively chelates iron (Fe3+) and exhibits a strong affinity for it. Although it has low affinity for other trace metals such as zinc and copper, its administration can lead to variable decreases in the serum concentrations of these metals. The clinical implications of these decreases are not fully understood, but they may impact overall metal homeostasis.

Pharmacokinetics

Deferasirox is administered orally and is well absorbed from the gastrointestinal tract. Peak plasma concentrations are reached within a few hours after dosing. The drug undergoes extensive metabolism in the liver, primarily through glucuronidation, and is excreted mainly in the feces, with a smaller fraction eliminated via urine. The half-life of deferasirox is approximately 8 to 16 hours, allowing for once-daily dosing.

Adverse effects

• Diarrhoea
• Dizziness
• Headache
• Hot flush
• Nausea
• Skin reactions
• Urine discolouration

Interactions

• Aluminium hydroxide - Severe (decreases exposure)
• Aminophylline - Severe (increases exposure)
• Antipsychotics, second-generation - Severe (increases exposure)
• Clozapine - Severe (increases exposure)
• Meglitinides - Severe (increases exposure)
• Repaglinide - Severe (increases exposure)
• Theophylline - Severe (increases exposure)
• Ritonavir - Moderate (decreases exposure)
• Treprostinil - Moderate (increases exposure)
• Rifampicin - Moderate (decreases exposure)

Precautions

• Diagnosis of Vitamin B12 deficiency should be confirmed before administration
• Should not be given to patients with cardiac dysfunction
• Use with caution in patients with conditions leading to iron overload

Pregnancy

Not recommended during pregnancy due to potential risks.

Breast-feeding

Present in milk but not known to be harmful.

Storage

Store in a cool, dry place, away from light.

Formulations

• Oral suspension
• Tablet

Indications

• Methemoglobinemia
• Urinary tract infections
• Surgical marking
• Treatment of certain types of cyanide poisoning

Dosage

Children: Refer to the BNF for Children for appropriate pediatric dosing information.

Adults: Refer to the relevant clinical guidelines or the BNF for specific dosing recommendations.

Mechanism of action

Methylene blue acts as a reducing agent, converting methemoglobin back to its functional form, hemoglobin. This is primarily achieved through its action as an electron donor, facilitating the reduction of ferric iron (Fe3+) in hemoglobin to ferrous iron (Fe2+), thereby restoring its oxygen-carrying capacity. It also exhibits antimicrobial properties through its ability to generate reactive oxygen species when exposed to light, which can inhibit bacterial growth.

Pharmacodynamics

The pharmacodynamics of methylene blue involve its role in enhancing oxygen delivery in patients suffering from methemoglobinemia. By converting methemoglobin back to hemoglobin, it effectively increases the amount of hemoglobin available for oxygen transport. The drug also shows effects on the vascular system, where it can induce vasodilation and influence blood pressure.

Pharmacokinetics

Methylene blue is rapidly absorbed after intravenous administration, with peak plasma concentrations occurring within 1 to 3 hours. It is extensively distributed in body tissues and fluids, including the liver, kidneys, and lungs. The drug undergoes hepatic metabolism, primarily through the cytochrome P450 system, and is excreted mainly through urine. The half-life ranges from 5 to 24 hours, depending on the dosage and individual patient factors.

Pregnancy

Consult healthcare provider before use, as safety in pregnancy is not established.

Breast-feeding

Consult healthcare provider before use, as safety during breastfeeding is not established.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Wound healing
• Skin protection
• Drug delivery systems
• Anti-inflammatory treatments

Dosage

Children: Refer to specific product guidelines for paediatric dosage information, as it can vary based on the formulation and intended use.

Adults: Refer to specific product guidelines for dosage information, as it can vary based on the formulation and intended use.

Mechanism of action

Colloidal systems work by providing a surface for drug absorption and enhancing the bioavailability of the therapeutic agent. The small particle size of colloids allows for increased surface area, which can facilitate interactions with biological membranes and improve penetration. The stability of colloids also allows for a controlled release of the active components, prolonging their therapeutic effects.

Pharmacodynamics

The pharmacodynamic properties of colloidal formulations depend on the specific active ingredients and their interactions with biological systems. Generally, colloids can enhance the solubility and absorption of poorly water-soluble drugs. They may also provide a protective effect on tissues, reduce inflammation, and promote healing processes in the body. The efficacy of colloidal systems is influenced by factors such as particle size, concentration, and the nature of the dispersing medium.

Pharmacokinetics

The pharmacokinetics of colloidal systems can vary widely based on the formulation and the active ingredient used. Typically, colloids exhibit prolonged circulation times due to their size, and they may be taken up by cells through endocytosis. The release of the active ingredient is dependent on the stability of the colloidal system and environmental conditions such as pH and temperature. Elimination pathways can include renal excretion or degradation by phagocytic cells.

Pregnancy

There is limited data on the safety of colloidal solutions during pregnancy. They should only be used if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Caution is advised when using colloidal solutions during breastfeeding. It is recommended to consult a healthcare professional before use.

Storage

Store in a cool, dry place away from direct sunlight. Ensure that the container is tightly closed to prevent contamination.

Indications

• Allergic rhinitis
• Common cold
• Sinusitis
• Seasonal allergies
• Nasal congestion

Dosage

Children: Refer to specific product formulations and BNF for Children for appropriate dosing in children, as it varies based on age and weight.

Adults: Refer to specific product formulations for dosing instructions, as they can vary by manufacturer and formulation.

Mechanism of action

The antihistamine component works by blocking histamine H1 receptors, which helps alleviate allergy symptoms such as sneezing, itching, and runny nose. The decongestant acts on adrenergic receptors in the nasal mucosa, causing vasoconstriction and reducing nasal congestion. Analgesic components help relieve pain by inhibiting the synthesis of prostaglandins in the central nervous system.

Pharmacodynamics

The combination of antihistamine and decongestant provides a synergistic effect, offering relief from multiple symptoms associated with colds and allergies. The antihistamine reduces allergic reactions and their symptoms, while the decongestant improves airflow through the nasal passages. The analgesic component alleviates discomfort, enhancing the overall therapeutic effect of the drug.

Pharmacokinetics

Absorption rates can vary based on the specific formulations of the drug. Typically, antihistamines are well absorbed from the gastrointestinal tract, with peak plasma concentrations occurring within 1 to 3 hours. Decongestants may have variable bioavailability depending on the route of administration. Metabolism mainly occurs in the liver, and elimination half-lives can range from a few hours to several hours depending on the specific agents included. Renal excretion plays a significant role in the clearance of these drugs.

Pregnancy

Safety in pregnancy has not been established. Use only if clearly needed and the benefits outweigh the risks.

Breast-feeding

Data is limited; use caution and consider the potential risks versus benefits.

Storage

Store at room temperature, away from moisture and heat. Keep out of reach of children.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Indications

• Topical drug delivery
• Emulsifying agent in pharmaceutical formulations
• Stabilizing agent in aqueous solutions
• Controlled drug release systems

Dosage

Children: Refer to specific product guidelines for dosing, as it varies based on formulation and intended use.

Adults: Refer to specific product guidelines for dosing, as it varies based on formulation and intended use.

Mechanism of action

Poloxamer acts primarily by reducing the surface tension at the interface between different phases, such as oil and water. This property allows it to stabilize emulsions and improve the solubility of poorly soluble drugs. Additionally, poloxamer can form micelles in solution, encapsulating hydrophobic drugs and facilitating their delivery in the body.

Pharmacodynamics

Poloxamer exhibits surfactant properties that can enhance drug absorption and bioavailability by altering the permeability of biological membranes. Its action as a solubilizing agent can improve the pharmacological effects of drugs by ensuring they remain in a bioavailable form longer. The polymeric nature of poloxamer can also lead to sustained release of encapsulated drugs, prolonging their therapeutic effect.

Pharmacokinetics

Poloxamer is poorly absorbed when administered orally and is primarily excreted unchanged in the feces. Its absorption through the skin is minimal, making it more suitable for topical applications. The pharmacokinetics can vary based on the formulation and route of administration, with its action typically being localized rather than systemic.

Adverse effects

• Skin irritation
• Allergic reactions
• Gastrointestinal disturbances
• Headache

Precautions

• Use with caution in patients with known allergies to surfactants
• Assess for skin sensitivity before use
• Monitor for adverse reactions during therapy

Pregnancy

Safety during pregnancy has not been established. Use only if clearly needed and potential benefits justify the risks.

Breast-feeding

It is not known whether poloxamer is excreted in human milk. Caution is advised when administering to nursing mothers.

Storage

Store at room temperature, away from moisture and heat. Keep container tightly closed.

Formulations

• Poloxamer 188 (used as a surfactant in various formulations)
• Poloxamer 407 (used in pharmaceutical formulations and drug delivery systems)

Indications

• Topical antiseptic for skin disinfection
• Surgical scrubs and hand sanitizers
• Wound care management
• Pharmaceutical excipient in solid and liquid formulations

Dosage

Children: Refer to specific product guidelines for pediatric dosing recommendations, as doses can vary based on formulation and intended use.

Adults: Refer to specific product guidelines for dosing recommendations, as doses can vary based on the formulation and intended use.

Mechanism of action

Povidone acts by forming a complex with iodine when used as an antiseptic, which releases iodine slowly to exert its antimicrobial effect. The iodine disrupts microbial cell walls and interferes with protein synthesis, leading to cell death. Additionally, as a polymer, povidone can enhance drug solubility and stability by forming a hydrophilic matrix.

Pharmacodynamics

Povidone has a broad spectrum of antimicrobial activity against bacteria, viruses, and fungi. Its antiseptic properties are primarily due to the release of iodine, which is effective in reducing microbial load and preventing infection. The polymer's ability to bind to various substances allows it to be utilized in formulations that require improved stability and solubility.

Pharmacokinetics

Povidone is not absorbed systemically when applied topically, as it remains localized at the site of application. Its pharmacokinetics are largely dependent on the formulation and route of administration, with the polymer being metabolized by hydrolysis and excreted in urine as low-molecular-weight compounds. The release and activity of iodine are influenced by the concentration of povidone and the presence of organic matter.

Adverse effects

• Local irritation
• Allergic reactions
• Skin rashes
• Hypersensitivity reactions

Precautions

• Use with caution in patients with known allergies to iodine or povidone-iodine
• Avoid use in deep puncture wounds or serious burns

Pregnancy

Povidone is generally considered safe for use during pregnancy, but it is advisable to consult a healthcare professional before use.

Breast-feeding

Povidone is considered safe during breastfeeding, but it is recommended to consult a healthcare professional.

Storage

Store at room temperature, away from moisture and heat. Keep the container tightly closed.

Formulations

• Topical solution
• Ointment
• Surgical scrub
• Gauze impregnated with povidone-iodine

Indications

• Silicosis
• Chronic obstructive pulmonary disease (COPD)
• Lung cancer associated with silica exposure

Dosage

Adults: Silica is not administered as a drug, but rather

Mechanism of action

Silica, particularly crystalline forms like quartz and cristobalite, can induce cytotoxicity and morphological transformation in cells. The cytotoxic effects are attributed to the presence of silanol groups and trace iron on the silica surface, which can generate reactive oxygen species. These interactions lead to cellular damage and transformation, suggesting multiple molecular mechanisms underlying silica's biological effects. The activity is sensitive to the silica's surface structure and composition, indicating that the biological response is a phenomenon originating from the silica's surface characteristics.

Pharmacodynamics

Silica's pharmacodynamic effects are largely related to its cytotoxic and transforming properties, particularly in lung tissue. The inhalation of crystalline silica can lead to the activation of inflammatory pathways, oxidative stress, and apoptosis in alveolar macrophages and epithelial cells. This can result in chronic inflammation, fibrosis, and ultimately, diseases such as silicosis and lung cancer. The degree of these effects varies based on the type of silica, its crystalline structure, and the presence of surface modifications.

Pharmacokinetics

The pharmacokinetics of silica is complex as it is not absorbed systemically when inhaled or ingested. Instead, inhaled silica particles can deposit in the alveolar region of the lungs, where they may persist for long periods. The body responds to silica exposure through inflammatory processes, and macrophages attempt to phagocytize silica particles. However, the persistence of these particles can lead to chronic lung conditions. Clearance mechanisms are inefficient, leading to prolonged retention in lung tissue.

Adverse effects

• Cytotoxicity
• Morphological transformation of cells
• Respiratory issues
• Silicosis
• Lung cancer

Precautions

• Use caution in occupational settings with silica dust exposure
• Regular monitoring of lung function in exposed individuals

Pregnancy

There is insufficient data on the effects of silica on pregnancy. It is advised to minimize exposure.

Breast-feeding

Limited data available; caution is advised due to potential respiratory effects.

Storage

Store in a cool, dry place, away from moisture and incompatible materials.

Formulations

• Crystalline silica
• Amorphous silica (diatomaceous earth)
• Silica gel

Mechanism of action

Two molecules of deferasirox are capable of binding to 1 atom of iron. Deferasirox works in treating iron toxicity by binding trivalent (ferric) iron (for which it has a strong affinity), forming a stable complex which is eliminated via the kidneys. Exjade (deferasirox) is an orally active chelator that is selective for iron (as Fe3+). It is a tridentate ligand that binds iron with high affinity in a 2:1 ratio. Although deferasirox has very low affinity for zinc and copper there are variable decreases in the serum concentration of these trace metals after the administration of deferasirox. The clinical significance of these decreases is uncertain. ... Nuclear factor-kappaB is a key regulator of many cellular processes and its impaired activity has been described in different myeloid malignancies including myelodysplastic syndromes. /Investigators/ evaluated deferasirox activity on nuclear factor-kappaB in myelodysplastic syndromes as a possible mechanism involved in hemoglobin improvement during in vivo treatment. Forty peripheral blood samples collected from myelodysplastic syndrome patients were incubated with 50 muM deferasirox for 18 hr. Nuclear factor-kappaB activity dramatically decreased in samples showing high basal activity as well as in cell lines, whereas no similar behavior was observed with other iron chelators despite a similar reduction in reactive oxygen species levels. Additionally, ferric hydroxyquinoline incubation did not decrease deferasirox activity in K562 cells suggesting the mechanism of action of the drug is independent from cell iron deprivation by chelation. Finally, incubation with both etoposide and deferasirox induced an increase in K562 apoptotic rate. Nuclear factor-kappaB inhibition by deferasirox is not seen from other chelators and is iron and reactive oxygen species scavenging independent. ... ... Iron-induced increase in oxidative stress was also associated with increased phosphorylation of ERK-, p38-, and JNK-mitogen-activated protein kinase (MAPK). Interestingly, deferasirox treatment significantly diminished the phosphorylation of all three MAPK subfamilies. These results suggest that deferasirox may confer a cardioprotective effect against iron induced injury. HIV-1 replication is induced by an excess of iron and iron chelation by desferrioxamine (DFO) inhibits viral replication by reducing proliferation of infected cells. Treatment of cells with DFO and 2-hydroxy-1-naphthylaldehyde isonicotinoyl hydrazone (311) inhibit expression of proteins that regulate cell-cycle progression, including cycle-dependent kinase 2 (CDK2). Recent studies /have/ shown that CDK2 participates in HIV-1 transcription and viral replication suggesting that inhibition of CDK2 by iron chelators might also affect HIV-1 transcription. Here /investigators/ evaluated the effect of a clinically approved orally effective iron chelator, 4-[3,5-bis-(hydroxyphenyl)-1,2,4-triazol-1-yl]-benzoic acid (ICL670) and 311 on HIV-1 transcription. Both ICL670 and 311 inhibited Tat-induced HIV-1 transcription in CEM-T cells, 293T and HeLa cells. Neither ICL670 nor 311 induced cytotoxicity at concentrations that inhibited HIV-1 transcription. The chelators decreased cellular activity of CDK2 and reduced HIV-1 Tat phosphorylation by CDK2. Neither ICL670A or 311 decreased CDK9 protein level but significantly reduced association of CDK9 with cyclin T1 and reduced phosphorylation of Ser-2 residues of RNA polymerase II C-terminal domain. In conclusion, /these/ findings add to the evidence that iron chelators can inhibit HIV-1 transcription by deregulating CDK2 and CDK9. ... Iron depletion improves insulin resistance in patients with nonalcoholic fatty liver disease and diabetes and also stabilizes the hypoxia-inducible factor (HIF)-1, resulting in increased glucose uptake in vitro. This study investigated the effect of iron depletion by deferoxamine on insulin signaling and glucose uptake in HepG2 hepatocytes and in rat liver. In HepG2 c

Pharmacodynamics

Deferasirox is an orally active chelator that is selective for iron (as Fe3+). It is a tridentate ligand that binds iron with high affinity in a 2:1 ratio. Although deferasirox has very low affinity for zinc and copper there are variable decreases in the serum concentration of these trace metals after the administration of deferasirox. The clinical significance of these decreases is uncertain.

Mechanism of action

...Some quartz and cristobalite dusts (crystalline) as well as the diatomaceous earths (amorphous), but not the pyrogenic amorphous silica, were cytotoxic and induced morphological transformation of SHE cells in a concentration-dependent manner. The ranking in cytotoxicity was different from that in transforming potency, suggesting two separate molecular mechanisms for the two effects. The cytotoxic and transforming potencies were different from one dust to another, even among the same structural silicas. The type of crystalline structure (quartz vs cristobalite) and the crystalline vs biogenic amorphous form did not correlate with cytotoxic or transforming potency of silica dusts. Comparison of cellular effects induced by original and surface modified samples revealed that several surface functionalities modulate cytotoxic and transforming potencies. The cytotoxic effects appeared to be related to the distribution and abundance of silanol groups and to the presence of trace amounts of iron on the silica surface. Silica particles with fractured surfaces and/or iron-active sites, able to generate reactive oxygen species, induced SHE cell transformation. The results show that the activity of silica at the cellular level is sensitive to the composition and structure of surface functionalities and confirm that the biological response to silica is a surface originated phenomenon. In vivo exposure of rat lungs to crystalline silica either by intratracheal instillation or by inhalation results in an increase in mRNA levels for inducible nitric oxide synthase (iNOS) in bronchoalveolar lavage cells (BALC), elevated nitric oxide (.NO) production by BALC, and an increase in .NO-dependent chemiluminescence (CL) from alveolar macrophages (AM). Induction of iNOS message occurs in both AM and polymorphonuclear leukocytes (PMN) harvested from silica-exposed lungs but is not significantly elevated in lavaged lung tissue. This review presents characteristics of simple and complicated coal workers' pneumoconiosis (CWP) as well as pathologic indices of acute and chronic silicosis by summarizing results of in vitro, animal, and human investigations. These results support four basic mechanisms in the etiology of CWP and silicosis: a) direct cytotoxicity of coal dust or silica, resulting in lung cell damage, release of lipases and proteases, and eventual lung scarring; b) activation of oxidant production by pulmonary phagocytes, which overwhelms the antioxidant defenses and leads to lipid peroxidation, protein nitrosation, cell injury, and lung scarring; c) activation of mediator release from alveolar macrophages and epithelial cells, which leads to recruitment of polymorphonuclear leukocytes and macrophages, resulting in the production of proinflammatory cytokines and reactive species and in further lung injury and scarring; d) secretion of growth factors from alveolar macrophages and epithelial cells, stimulating fibroblast proliferation and eventual scarring. Results of in vitro and animal studies provide a basis for proposing these mechanisms for the initiation and progression of pneumoconiosis. Data obtained from exposed workers lend support to these mechanisms. /The authors/ reported previously that freshly fractured silica (FFSi) induces activator protein-1 (AP-1) activation through extracellular signal-regulated protein kinases (ERKs) and p38 kinase pathways. In the present study, the biologic activities of FFSi and aged silica (ASi) were compared by measuring their effects on the AP-1 activation and phosphorylation of ERKs and p38 kinase. The roles of reactive oxygen species (ROS) in this silica-induced AP-1 activation were also investigated. FFSi-induced AP-1 activation was four times higher than that of ASi in JB6 cells. FFSi also caused greater phosphorylation of ERKs and p38 kinase than ASi. FFSi generated more ROS than ASi when incubated with the cells as measured by electron spin resonance (ESR). Studies using ROS-sensitive dyes and