REZOL-20

Indications

• Dry eye conditions
• Tear deficiency
• Keratoconjunctivitis sicca

Dosage

Children: Apply as required, typically in the form of eye drops.

Adults: Apply as required, typically in the form of eye drops.

Mechanism of action

Hypromellose acts by forming a viscous gel upon contact with the ocular surface, which helps to retain moisture and protect against irritants. This gel-like property enhances the stability of the tear film and reduces evaporation, thereby alleviating symptoms associated with dry eye conditions.

Pharmacodynamics

The pharmacodynamic effects of hypromellose are primarily related to its ability to mimic natural tears, providing lubrication to the ocular surface. This lubrication reduces friction during blinking and maintains corneal hydration, which is critical for ocular comfort and health. Its high viscosity also contributes to prolonged retention time on the eye surface.

Pharmacokinetics

Hypromellose is administered topically as eye drops and is not significantly absorbed systemically. The retention time of hypromellose on the ocular surface is enhanced due to its viscosity, allowing for extended relief of dry eye symptoms. The elimination of hypromellose occurs primarily through drainage from the eye and dilution by the natural tear fluid.

Adverse effects

• Temporary visual disturbance
• Eye irritation

Precautions

• Should not be used during contact lens wear
• Use with caution in patients with known hypersensitivity to any component of the formulation

Pregnancy

Hypromellose is generally considered safe for use during pregnancy. However, it should be used only if clearly needed and after consulting a healthcare provider.

Breast-feeding

Hypromellose is unlikely to affect breastfed infants when used as directed, but consultation with a healthcare provider is advisable.

Storage

Store in a cool, dry place away from direct sunlight. Once opened, use within a specified period as indicated on the packaging.

Formulations

• {'name': 'Teardew', 'concentration': '0.3%', 'form': 'eye drops', 'volume': '10 ml'}
• {'name': 'Xailin Hydrate', 'concentration': '0.3%', 'form': 'eye drops', 'volume': '10 ml'}
• {'name': 'AacuLose', 'concentration': '0.3%', 'form': 'eye drops', 'volume': '10 ml'}
• {'name': 'Artelac', 'concentration': '0.32%', 'form': 'eye drops', 'volume': '10 ml'}
• {'name': 'Lacrilube', 'concentration': '2 mg/g', 'form': 'eye ointment', 'volume': '3.5 g'}
• {'name': 'Celluvisc', 'concentration': '1%', 'form': 'eye drops', 'volume': '0.4 ml unit dose'}

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Cerebral edema
• Elevated intracranial pressure
• Acute kidney injury
• Oliguria
• Glaucoma
• Renal function diagnostic aid

Dosage

Adults: For cerebral edema, administer 0

Mechanism of action

Mannitol elevates blood plasma osmolality, resulting in enhanced flow of water from tissues, including the brain and cerebrospinal fluid, into interstitial fluid and plasma. This action reduces cerebral edema and intracranial pressure. As a diuretic, it increases the osmolality of glomerular filtrate, leading to increased urinary excretion of water and preventing sodium and chloride reabsorption in the renal tubules. Mannitol also facilitates the urinary excretion of toxic substances and can help in assessing renal function by measuring glomerular filtration rate (GFR).

Pharmacodynamics

Mannitol is classified as an osmotic diuretic. It is chemically similar to other sugar alcohols but has a unique ability to promote diuresis by remaining unabsorbed in the renal tubules. Its use is indicated for conditions associated with increased body fluids, such as cerebral edema and glaucoma. Mannitol may be combined with other diuretics to enhance diuretic efficacy. Inhaled formulations are used in cystic fibrosis, though they may cause bronchospasm and hemoptysis.

Pharmacokinetics

Mannitol is freely filtered by the glomeruli with less than 10% tubular reabsorption, which allows for its urinary excretion rate to serve as a measurement of GFR. It does not undergo significant metabolism and is eliminated primarily through the kidneys. The onset of action occurs within 30 to 60 minutes after intravenous administration, with effects lasting for several hours. Administration may require monitoring of renal function and fluid balance.

Contra-indications

• Anuria
• Severe dehydration
• Severe renal impairment
• Intracranial bleeding

Adverse effects

• Asthenia
• Gastrointestinal disturbances
• Dry mouth
• Confusion
• Visual impairment
• Hypotension
• Electrolyte imbalances
• Pulmonary edema
• Hemoptysis (with inhalation use)
• Bronchospasm (with inhalation use)

Interactions

• Potassium-sparing diuretics may increase the risk of hyperkalemia
• Other diuretics may have additive effects
• Caution with nephrotoxic agents

Precautions

• Caution in patients with diabetes mellitus
• Caution in the elderly
• Caution in patients with gout
• Caution in patients with hepatic impairment
• Monitor renal function and electrolytes regularly
• May cause blue fluorescence of urine

Pregnancy

Manufacturer advises avoid due to potential toxicity in animal studies.

Breast-feeding

Manufacturer advises avoid due to lack of information available.

Storage

Store in a cool, dry place, away from light. Do not freeze.

Formulations

• Solution for injection
• Inhalation powder
• Oral solution

Indications

• Gastric ulcer
• Duodenal ulcer
• Gastro-oesophageal reflux disease (GERD)
• Functional dyspepsia
• NSAID-associated peptic ulcer disease
• Zollinger-Ellison syndrome

Dosage

Adults: Initially 20 mg once daily for 4 to 8 weeks for GERD. For gastric and duodenal ulcers, the initial dose is 20 mg daily for 4 to 8 weeks. For NSAID-associated peptic ulcer disease, the recommended dose is 20 mg once daily for 4 to 8 weeks. Dose adjustments may be necessary in hepatic impairment, with a maximum dose of 20 mg daily

Mechanism of action

Rabeprazole sodium acts by irreversibly binding to and inhibiting the H+/K+ ATPase enzyme system (proton pump) in the gastric epithelium. This action leads to a decrease in gastric acid secretion, both basal and stimulated. The inhibition is dose-dependent and can last for 24 hours or longer, which helps in healing peptic ulcers and alleviating symptoms of acid-related disorders.

Pharmacodynamics

Rabeprazole sodium effectively suppresses gastric acid secretion, providing symptomatic relief and promoting mucosal healing in conditions associated with excessive gastric acidity. It demonstrates a rapid onset of action, with peak plasma concentrations occurring approximately 3-4 hours after administration. The drug's effects on gastric acid secretion can lead to increased gastric pH and improved healing of ulcerative lesions.

Pharmacokinetics

Rabeprazole sodium is rapidly absorbed after oral administration, with bioavailability of approximately 52% due to first-pass metabolism. The drug is extensively metabolized in the liver, primarily via the cytochrome P450 system. Its elimination half-life ranges from 1 to 2 hours, and it is excreted primarily through urine as metabolites. Food does not significantly affect its absorption.

Adverse effects

• Asthenia
• Angioedema
• Electrolyte imbalance
• Muscle spasms
• Hyperlipidaemia
• Weight change

Precautions

• Manufacturer advises caution in severe hepatic impairment, monitor liver function and discontinue if deterioration occurs.

Pregnancy

Manufacturer advises to avoid unless potential benefit outweighs risk-fetotoxic in animals.

Breast-feeding

Specialist sources indicate that the amount in milk is small and not known to be harmful.

Storage

Store below 25 degrees Celsius. Protect from light and moisture.

Formulations

• Gastro-resistant tablet
• Powder for solution for injection

Mechanism of action

Carbonate ions participate in buffering reactions that help maintain pH homeostasis in biological systems. They can react with acids to form bicarbonate and carbon dioxide, thus neutralizing excess acidity in the body. This mechanism is crucial in processes such as respiration and metabolism.

Pharmacodynamics

As a buffer, carbonate helps to stabilize pH levels in different biological environments, preventing excessive acidity or alkalinity that could impair cellular functions. It is involved in the transport of carbon dioxide in the blood and plays a role in maintaining the acid-base equilibrium necessary for physiological processes.

Pharmacokinetics

Carbonate ions are readily absorbed in the gastrointestinal tract when ingested and can be found in various body fluids. They are involved in the bicarbonate buffering system, where they are converted to bicarbonate (HCO3-) and carbon dioxide (CO2) through reactions with acids. The kidneys regulate the levels of bicarbonate and carbonate in the body, excreting or reabsorbing them as needed to maintain homeostasis.

Pregnancy

There is no specific information available regarding the use of carbonate compounds during pregnancy. Consult a healthcare provider for advice.

Breast-feeding

There is no specific information available regarding the use of carbonate compounds while breastfeeding. Consult a healthcare provider for advice.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Protection of active ingredients in pharmaceutical formulations
• Enhancement of drug stability
• Improvement of palatability in oral dosage forms
• Facilitation of swallowing for patients with difficulty
• Controlled release of active substances

Dosage

Children: Refer to specific product information for pediatric dosing recommendations, as this varies widely based on the formulation and active ingredient.

Adults: Refer to specific product information for dosing instructions, as this varies based on the formulation and active ingredient.

Mechanism of action

The mechanism of action for coated formulations generally involves the creation of a barrier that protects the active pharmaceutical ingredient from environmental factors like moisture and oxygen. In some cases, the coating may also control the release of the drug, allowing for extended or modified release profiles that enhance therapeutic effects. Specific coatings might interact with the gastrointestinal environment, affecting solubility and absorption rates.

Pharmacodynamics

Pharmacodynamics of coated formulations can vary widely depending on the active ingredient and the nature of the coating itself. Coatings may be designed to dissolve at specific pH levels, ensuring that the drug is released in the optimal environment for absorption. The protective nature of the coat can also affect the bioavailability of the active compound, influencing its efficacy and safety profile.

Pharmacokinetics

Pharmacokinetics of coated drugs involve considerations of absorption, distribution, metabolism, and excretion. The coating can alter the rate of drug absorption, with some coatings designed to delay release until the drug reaches the intestines. The distribution of the drug throughout the body may also be affected by the coating, as it can influence the solubility and stability of the drug in systemic circulation. Metabolism and excretion can be influenced by the characteristics of the coating material and the nature of the active ingredient.

Pregnancy

Consult healthcare provider before use. Limited data available on safety.

Breast-feeding

Consult healthcare provider before use. Limited data available on safety.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Used as a disintegrant in tablet formulations
• Enhances the bioavailability of active pharmaceutical ingredients

Dosage

Children: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Adults: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Mechanism of action

Croscarmellose sodium works by swelling and absorbing water when it comes into contact with gastrointestinal fluids. This swelling leads to the rapid disintegration of the tablet or capsule matrix, facilitating the release and absorption of the active pharmaceutical ingredients.

Pharmacodynamics

Croscarmellose sodium is classified as a superdisintegrant. Its ability to rapidly disintegrate solid dosage forms can significantly enhance the dissolution rate of the active ingredient, which is crucial for achieving therapeutic effects in a timely manner.

Pharmacokinetics

Croscarmellose sodium is not absorbed in the gastrointestinal tract and does not exert pharmacological effects in the body. It is considered non-toxic and is excreted unchanged. Its main role is as an excipient, influencing the formulation's characteristics rather than the pharmacokinetics of the active ingredients.

Precautions

• Use with caution in patients with known hypersensitivity to croscarmellose or its components.

Pregnancy

Safety in pregnancy has not been established. Use only if clearly needed.

Breast-feeding

Caution is advised when using during breastfeeding, as safety has not been established.

Storage

Store in a cool, dry place, away from moisture and heat.

Formulations

• Powder
• Granules

Indications

• Used as an excipient in solid dosage forms
• Facilitates drug disintegration and dissolution

Dosage

Children: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Adults: Refer to specific product formulation guidelines as crospovidone is used as an excipient and does not have a direct dosage.

Mechanism of action

Crospovidone acts by rapidly absorbing water and swelling upon contact with moisture. This action leads to the disintegration of solid dosage forms, thus increasing the surface area of the active ingredients and promoting their dissolution and subsequent absorption in the gastrointestinal tract. It does not affect the pH of the formulation, ensuring that the active ingredients remain stable.

Pharmacodynamics

Crospovidone exhibits properties that enhance the bioavailability of active ingredients in pharmaceutical formulations. Its ability to rapidly disintegrate tablets and capsules leads to quicker release and absorption of the drug into systemic circulation. As a disintegrant, it aids in the effective delivery of drugs that may otherwise be poorly soluble.

Pharmacokinetics

Crospovidone itself is not absorbed systemically when administered orally. It remains in the gastrointestinal tract, where it performs its function as a disintegrant. The pharmacokinetic profile of drugs formulated with crospovidone may be influenced by the enhanced dissolution and absorption rates provided by this excipient.

Pregnancy

Crospovidone is considered to have low toxicity and is generally regarded as safe for use during pregnancy, but specific studies are limited.

Breast-feeding

There is insufficient data on the excretion of crospovidone in human milk, but it is deemed safe for use during breastfeeding.

Storage

Store in a cool, dry place away from light and moisture, in tightly closed containers.

Formulations

• Powder
• Tablets

Mechanism of action

Dichloromethane induces mammary adenomas in rats through an indirect mechanism involving hyperprolactinaemia, resulting in benign neoplasms. It does not bind to DNA in various tissues, suggesting that its carcinogenic effects are likely mediated through metabolic pathways in the liver. In mice, DCM acts as a hepatic and pulmonary carcinogen, mediated by interaction with DNA through a glutathione (GSH) conjugate produced by the enzyme glutathione S-transferase T1-1 (GST T1-1).

Pharmacodynamics

Dichloromethane exhibits carcinogenic properties, particularly evident in animal studies where exposure leads to liver and lung tumors. The incidence of tumors varies by species, with higher susceptibility observed in mice due to differences in glutathione transferase activity. Its effects on humans are still uncertain, necessitating caution in its handling and use due to potential health risks.

Pharmacokinetics

Dichloromethane is rapidly absorbed through inhalation and dermal exposure, with peak blood concentrations occurring shortly after exposure. It undergoes extensive hepatic metabolism primarily via cytochrome P450 enzymes, leading to the formation of reactive metabolites. The elimination half-life is relatively short, with excretion occurring mainly through the lungs and urine.

Pregnancy

Dichloromethane should be avoided during pregnancy due to its potential carcinogenic effects and lack of safety data in pregnant women.

Breast-feeding

It is not known whether dichloromethane is excreted in human milk, thus it should be used with caution in breastfeeding mothers.

Storage

Store in a cool, dry place away from heat and light. Keep container tightly closed.

Indications

• Gastroesophageal reflux disease (GERD)
• Peptic ulcers
• Chronic pain management
• Certain anti-inflammatory medications

Dosage

Children: Refer to specific drug guidelines for dosing information, as it varies according to the therapeutic agent and indication.

Adults: Refer to specific drug guidelines for dosing information, as it varies according to the therapeutic agent and indication.

Mechanism of action

Enteric coatings are typically made from polymers that remain intact in the acidic environment of the stomach but dissolve in the more alkaline environment of the intestine. This allows for targeted delivery of the active pharmaceutical ingredient (API) to the site of absorption in the intestinal tract, enhancing overall therapeutic efficacy and reducing potential side effects associated with gastric exposure.

Pharmacodynamics

The pharmacodynamic profile of enteric-coated drugs depends on the specific API used. Generally, the enteric coating allows for improved absorption of the drug in the intestine, leading to a more predictable pharmacological response. The delayed release can also reduce local irritation and systemic side effects, allowing for higher therapeutic doses to be administered safely.

Pharmacokinetics

Enteric-coated formulations often exhibit altered pharmacokinetic properties compared to non-coated forms. The onset of action may be delayed due to the time required for the coating to dissolve. Absorption primarily occurs in the intestine, which can lead to differences in peak plasma concentrations and overall bioavailability. The specific pharmacokinetics will vary based on the characteristics of the drug and its formulation.

Pregnancy

The safety of enteric formulations during pregnancy has not been established. Use only if clearly needed and after assessing risks versus benefits.

Breast-feeding

Enteric formulations may be excreted in breast milk. Exercise caution and consult a healthcare professional before use.

Storage

Store at room temperature, away from light and moisture. Keep out of reach of children.

Indications

• Pain relief
• Anti-inflammatory treatment
• Antipyretic therapy
• Nutritional supplementation
• Electrolyte replacement
• Treatment of gastrointestinal disorders

Dosage

Children: Refer to specific product labeling or clinical guidelines for paediatric dosing, as this varies widely depending on the active ingredient and condition being treated.

Adults: Refer to specific product labeling or clinical guidelines for adult dosing, as this varies widely depending on the active ingredient and condition being treated.

Mechanism of action

The mechanism of action for granular formulations depends on the active pharmaceutical ingredient contained within the granules. Generally, these medications may work by various mechanisms such as inhibiting certain enzymes, blocking receptors, or modulating specific pathways involved in disease processes. For example, if the granules contain a medication that acts as an anti-inflammatory, it may inhibit the cyclooxygenase (COX) enzymes involved in the production of inflammatory mediators.

Pharmacodynamics

Pharmacodynamics describes how a drug affects the body. Granular medications can provide a rapid onset of action due to their surface area, which facilitates quicker dissolution and absorption. The effects vary depending on the active ingredient, which may influence various biological pathways, such as neurotransmitter modulation, receptor activation, or inhibition of certain cellular processes. The therapeutic effects are often dose-dependent and can be influenced by factors such as age, weight, and overall health.

Pharmacokinetics

The pharmacokinetics of granular formulations also vary based on the specific active ingredient. Generally, pharmacokinetic parameters include absorption, distribution, metabolism, and excretion (ADME). Granular medications typically exhibit faster absorption compared to solid dosage forms due to the larger surface area. Distribution will depend on factors like solubility and protein binding. Metabolism primarily occurs in the liver, while excretion can take place via the kidneys or bile, again depending on the nature of the active compound.

Pregnancy

Safety during pregnancy has not been established. Use only if clearly needed and potential benefits justify the risks.

Breast-feeding

Use with caution. Limited data available, and effects on the nursing infant are unknown.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Antiseptic for skin disinfection
• Solvent in pharmaceutical formulations
• Cleaning agent in laboratories and healthcare settings

Dosage

Children: For pediatric use, consult specific guidelines in the BNF for Children, as dosing may vary based on age, weight, and clinical circumstances.

Adults: For skin antisepsis, apply isopropyl alcohol topically in a concentration of 70% to the affected area. Dosage may vary based on clinical indication and setting.

Mechanism of action

Isopropyl alcohol works primarily as an antiseptic by denaturing proteins and disrupting cell membranes of bacteria, viruses, and fungi, leading to cell lysis and death. Its efficacy is enhanced by the presence of water, which facilitates the penetration of the alcohol into microbial cells.

Pharmacodynamics

Isopropyl alcohol exhibits a rapid onset of action against a variety of pathogens, including gram-positive and gram-negative bacteria, fungi, and some viruses. Its antimicrobial activity is concentration-dependent, with higher concentrations generally providing a broader spectrum of activity. It is commonly used in concentrations ranging from 60% to 90%, with 70% being optimal for disinfection due to its ability to penetrate the cell wall effectively.

Pharmacokinetics

Isopropyl alcohol is readily absorbed through the skin and mucous membranes. After absorption, it is metabolized primarily in the liver to acetone, which is then further metabolized and excreted, mostly via urine. The elimination half-life of isopropyl alcohol varies but is typically around 2 to 3 hours. Its effects can be influenced by factors such as dosage, route of exposure, and individual metabolic differences.

Pregnancy

Isopropyl alcohol should be used with caution during pregnancy. It is a category C drug, indicating that risk cannot be ruled out.

Breast-feeding

Caution is advised when using isopropyl alcohol during breastfeeding, as it is not known if it is excreted in human milk.

Storage

Isopropyl alcohol should be stored at room temperature, away from heat and flame. Keep the container tightly closed and in a well-ventilated area.

Formulations

• Isopropyl alcohol 70% solution
• Isopropyl alcohol 99% solution

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Indications

• Gastroesophageal reflux disease (GERD)
• Peptic ulcers
• Zollinger-Ellison syndrome
• Prevention of gastric ulcers associated with NSAID use

Dosage

Adults: Refer to BNF for specific dosing recommendations based on condition being treated.

Mechanism of action

Rabeprazole inhibits gastric acid secretion by irreversibly binding to the hydrogen-potassium ATPase enzyme system (H+, K+-ATPase) located at the parietal cell surface. This action blocks the final step in the gastric acid secretion process, leading to a reduction in hydrogen ion transport into the gastric lumen. Rabeprazole is activated in the acidic environment of the stomach, transforming into an active sulfenamide which exerts its inhibitory effects.

Pharmacodynamics

By preventing the production of gastric acid, rabeprazole alleviates symptoms associated with excessive acid secretion, such as heartburn and esophagitis. It is particularly effective in treating gastroesophageal reflux disease (GERD) and peptic ulcers, as well as in combination with antibiotics for the eradication of Helicobacter pylori. Furthermore, rabeprazole is utilized in managing conditions like Zollinger-Ellison syndrome, where there is an overproduction of gastric acid.

Pharmacokinetics

Rabeprazole is rapidly absorbed following oral administration, with peak plasma concentrations occurring within 1 to 2 hours. It is extensively metabolized in the liver through the cytochrome P450 system, primarily via CYP2C19 and CYP3A4 isoenzymes. The elimination half-life of rabeprazole ranges from 1 to 2 hours. The drug is excreted mainly in the urine as metabolites, with minimal unchanged drug present. Food intake can affect the absorption but not the overall efficacy of the drug.

Adverse effects

• Headache
• Nausea
• Diarrhea
• Constipation
• Abdominal pain
• Rash
• Dizziness

Interactions

• apalutamide+rabeprazole: Unknown (decreases exposure)

Precautions

• Use with caution in patients with hepatic impairment
• Monitor for potential vitamin B12 deficiency with long-term use
• Consider risk of Clostridium difficile infection in patients with diarrhea

Pregnancy

Rabeprazole is classified as category B. Animal studies have shown no harm, but there are no well-controlled studies in pregnant women. Use only if clearly needed.

Breast-feeding

Rabeprazole is excreted in breast milk. Caution should be exercised when administered to a nursing mother.

Storage

Store at room temperature, away from moisture and heat. Keep out of reach of children.

Formulations

• Tablets: 20 mg

Indications

• Anti-inflammatory support
• Pain relief
• Potential cardiovascular health benefits
• Nutritional supplement

Dosage

Children: Refer to product-specific guidelines or consult with a healthcare professional for appropriate dosing.

Adults: Refer to product-specific guidelines or consult with a healthcare professional for appropriate dosing.

Mechanism of action

The specific mechanisms of action for seal products are not well-defined in scientific literature. However, they may exert effects through the modulation of inflammatory pathways and the inhibition of pain signaling. Some components may influence cytokine production and promote antioxidant activity.

Pharmacodynamics

The pharmacodynamic profile of seal products is not extensively documented. It is generally understood that seal products may interact with various biological pathways involved in inflammation and pain, though specific receptor targets or pathways have not been clearly established in peer-reviewed research.

Pharmacokinetics

Due to the lack of specific studies on seal products, pharmacokinetic data such as absorption, distribution, metabolism, and excretion are not well-characterized. It is presumed that bioactive compounds within seal products may be metabolized in a manner similar to other dietary fats and oils, but this remains largely speculative.

Pregnancy

There is limited information available regarding the use of seal in pregnant women. It is advisable to avoid using this substance unless the potential benefits outweigh the risks.

Breast-feeding

The excretion of seal in human milk is not well studied. Caution is advised when using this substance while breastfeeding.

Storage

Store in a cool, dry place away from direct sunlight.

Pregnancy

No specific data available, consult a healthcare professional.

Breast-feeding

No specific data available, consult a healthcare professional.

Storage

Store in a cool, dry place away from light.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Mannitol is an osmotic diuretic that is metabolically inert in humans and occurs naturally, as a sugar or sugar alcohol, in fruits and vegetables. Mannitol elevates blood plasma osmolality, resulting in enhanced flow of water from tissues, including the brain and cerebrospinal fluid, into interstitial fluid and plasma. As a result, cerebral edema, elevated intracranial pressure, and cerebrospinal fluid volume and pressure may be reduced. As a diurectic mannitol induces diuresis because it is not reabsorbed in the renal tubule, thereby increasing the osmolality of the glomerular filtrate, facilitating excretion of water, and inhibiting the renal tubular reabsorption of sodium, chloride, and other solutes. Mannitol promotes the urinary excretion of toxic materials and protects against nephrotoxicity by preventing the concentration of toxic substances in the tubular fluid. As an Antiglaucoma agent mannitol levates blood plasma osmolarity, resulting in enhanced flow of water from the eye into plasma and a consequent reduction in intraocular pressure. As a renal function diagnostic aid mannitol is freely filtered by the glomeruli with less than 10% tubular reabsorption. Therefore, its urinary excretion rate may serve as a measurement of glomerular filtration rate (GFR). The exact mechanism of action of inhaled mannitol in the symptomatic maintenance treatment of cystic fibrosis remains unclear. It is hypothesized that mannitol produces an osmotic gradient across the airway epithelium that draws fluid into the extracellular space and alters the properties of the airway surface mucus layer, allowing easier mucociliary clearance. MANNITOL IS.../USED/ IN PROPHYLAXIS OF ACUTE RENAL FAILURE. IT IS USED FOR THIS PURPOSE IN CONDITIONS AS DIVERSE AS CARDIOVASCULAR OPERATIONS, SEVERE TRAUMATIC INJURY, OPERATIONS IN THE PRESENCE OF SEVERE JAUNDICE, AND MGMNT OF HEMOLYTIC TRANSFUSION REACTIONS. IN EACH OF THESE CONDITIONS, A PRECIPITOUS FALL IN THE FLOW OF URINE MAY BE ANTICIPATED EITHER AS THE RESULT OF AN ACUTELY REDUCED FILTRATION RATE OR FROM ACUTE CHANGES IN TUBULAR PERMEABILITY. THE LATTER MAY BE CONSEQUENCE OF THE PRESENCE OF NOXIOUS AGENT WITHIN THE TUBULAR FLUID IN EXCESSIVELY HIGH CONCN, IN SOME INSTANCES SUFFICIENT TO RESULT IN ACTUAL PRECIPITATION. IN THESE SITUATIONS, MANNITOL EXERTS OSMOTIC EFFECT WITHIN THE TUBULAR FLUID, INHIBITS WATER REABSORPTION, & MAINTAINS THE RATE OF URINE FLOW. ...CONCN OF TOXIC AGENT WITHIN TUBULAR FLUID DOES NOT REACH EXCESSIVELY HIGH LEVELS THAT OTHERWISE WOULD HAVE BEEN ACHIEVED BY MORE COMPLETE REABSORPTION OF WATER. ...EVEN THOUGH /GLOMERULAR/ FILTRATION RATE IS REDUCED, MANNITOL IS STILL FILTERED @ GLOMERULUS. THE TUBULAR IMPERMEABILITY TO MANNITOL IS NOT ALTERED BY ACUTE RENAL ISCHEMIA OF SHORT DURATION. HENCE, THE MANNITOL THAT IS FILTERED IS ALSO EXCRETED IN THE VOIDED URINE. UNREABSORBED SOLUTE LIMITS BACK DIFFUSION OF WATER. ...URINE VOL CAN BE MAINTAINED EVEN IN PRESENCE OF DECR GLOMERULAR FILTRATION.

Pharmacodynamics

Chemically, mannitol is an alcohol and a sugar, or a polyol; it is similar to xylitol or sorbitol. However, mannitol has a tendency to lose a hydrogen ion in aqueous solutions, which causes the solution to become acidic. For this reason, it is not uncommon to add a substance to adjust its pH, such as sodium bicarbonate. Mannitol is commonly used to increase urine production (diuretic). It is also used to treat or prevent medical conditions that are caused by an increase in body fluids/water (e.g., cerebral edema, glaucoma, kidney failure). Mannitol is frequently given along with other diuretics (e.g., furosemide, chlorothiazide) and/or IV fluid replacement. Inhaled mannitol has the possibility to cause bronchospasm and hemoptysis; the occurrence of either should lead to discontinuation of inhaled mannitol.

Mechanism of action

The mechanism by which methylene chloride induces mammary adenomas in the rat is important for human hazard assessment. Female Sprague- Dawley rats receiving methylene chloride have a high blood level of prolactin. In common with the response to other agents which act via hyperprolactinaemia, the methylene chloride-induced response is of benign neoplasms only. There is no evidence for the binding of methylene chloride to the DNA of other tissues and hence it seems unlikely that it will bind to mammary tissue when the primary site of metabolism is the liver. It seems most likely, therefore, that the increased incidence of mammary adenomas is the result of an indirect mechanism operating via hyperprolactinaemia. Dichloromethane (DCM) is a hepatic and pulmonary carcinogen in mice exposed to high doses by inhalation. It has been shown previously that the incidence of liver and lung tumors does not increase in rats or hamsters exposed to the dihaloalkane under conditions similar to those that produced tumors in mice. The biological consequences of DCM exposure to humans is therefore uncertain. The carcinogenic effects of DCM in the mouse are caused by the interaction with DNA of a glutathione (GSH) conjugate that is produced by the class theta glutathione S-transferase T1-1 (GST T1-1). The species specificity is thought to be due to the greater amount of transferase activity in mouse target organs and specific nuclear localization of GST T1-1 in target cells. This paper directly compares the relative capacity and locality of DCM activation in mouse and human tissues. The results show that mouse GST T1-1 is more efficient in catalyzing the conjugation of DCM with GSH than the orthologous human enzyme. In addition, the mouse expresses higher levels of the transferase than humans in hepatic tissue. Histochemical analysis confirmed the presence of GST T1-1 in the nucleus of mouse liver cells. However, in human liver GST T1-1 was detected in bile duct epithelial cells and hepatocyte nuclei but was also present in the cytoplasm. Taking this information into account, it is unlikely that humans have a sufficiently high capacity to activate DCM for this compound to be considered to represent a carcinogenic risk. Dichloromethane (DCM) is considered a probable human carcinogen. Laboratory studies have shown an increased incidence of lung and liver cancer in mice but not in rats or hamsters. Despite the correlation between metabolism of DCM by the glutathione-S-transferase (GST) pathway and the occurrence of tumors in different species, the mechanism of tumor induction by DCM metabolites produced through the GST pathway remains unclear. In this study a V79 cell line stably transfected with the murine GST theta 1 gene (mGSTT1) was compared to the parent cell line (MZ) to determine how the construct affects DCM metabolism and the sensitivity of the cell line to DNA damage and cytotoxicity. V79 cells were treated with DCM (2.5-10mM) or formaldehyde (150-600muM) for 2hr. Also, formaldehyde produced by V79 cytosol metabolism of DCM was measured spectrophotometrically. DNA damage and DNA-protein crosslinks were measured by the standard and proteinase K-modified alkaline single cell gel electrophoresis (SCG) assays. Cytotoxicity was assessed by trypan blue stain exclusion, the Live/Dead((R)) cell viability/cytotoxicity kit for animal cells, and the neutral red assay. After DCM treatment a significant concentration-dependent increase in tail moment in the V79 MZ cells was observed compared to a significant concentration-dependent decrease in tail moment in the V79 mGSTT1 cells. Post-incubation with proteinase K significantly increased DNA migrations in DCM-treated V79 mGSTT1 cells. DCM formed significantly higher levels of formaldehyde in the cytosol of the V79 mGSTT1 cells than in the cytosol of the V79 MZ cells. Results using the cytotoxicity assays were comparable using the trypan blue and Live/Dead((R)) assays, neither showing a difference in resp

Mechanism of action

Rabeprazole belongs to a class of antisecretory compounds (substituted benzimidazole proton-pump inhibitors) that do not exhibit anticholinergic or histamine H2-receptor antagonist properties, but suppress gastric acid secretion by inhibiting the gastric H⁺/K⁺ATPase (hydrogen-potassium adenosine triphosphatase) at the secretory surface of the gastric parietal cell. Because this enzyme is regarded as the acid (proton) pump within the parietal cell, rabeprazole has been characterized as a gastric proton-pump inhibitor. Rabeprazole blocks the final step of gastric acid secretion. In gastric parietal cells, rabeprazole is protonated, accumulates, and is transformed to an active sulfenamide. When studied in vitro, rabeprazole is chemically activated at pH 1.2 with a half-life of 78 seconds. Rabeprazole is a selective and irreversible proton pump inhibitor. Rabeprazole suppresses gastric acid secretion by specific inhibition of the hydrogen-potassium adenosine triphosphatase (H+, K+-ATPase) enzyme system found at the secretory surface of parietal cells. It inhibits the final transport of hydrogen ions (via exchange with potassium ions) into the gastric lumen. Since the H+, K+-ATPase enzyme system is regarded as the acid (proton) pump of the gastric mucosa, rabeprazole is known as a gastric acid pump inhibitor. Rabeprazole does not have anticholinergic or histamine H2-receptor antagonist properties. Rabeprazole binds to hydrogen-potassium ATPase in gastric parietal cells; inactivation of this enzyme system (also known as the proton, hydrogen, or acid pump) blocks the final step in the secretion of hydrochloric acid secretion. The antisecretory effect is apparent within 1 hour following oral administration with the median inhibitory effect on 24-hour gastric acidity being 88% of maximal after the first dose.

Pharmacodynamics

Rabeprazole prevents the production of acid in the stomach. It reduces symptoms and prevents injury to the esophagus or stomach in patients with gastroesophageal reflux disease (GERD) or ulcers. Rabeprazole is also useful in conditions that produce too much stomach acid such as Zollinger-Ellison syndrome. Rabeprazole may also be used with antibiotics to get rid of bacteria that are associated with some ulcers. Rabeprazole is a selective and irreversible proton pump inhibitor, suppresses gastric acid secretion by specific inhibition of the H⁺, K⁺ -ATPase, which is found at the secretory surface of parietal cells. In doing so, it inhibits the final transport of hydrogen ions (via exchange with potassium ions) into the gastric lumen.