Rivamac 15 (Rivaroxaban film coated Tablets 15 mg)

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Prophylaxis of venous thromboembolism following knee replacement surgery
• Prophylaxis of venous thromboembolism following hip replacement surgery
• Treatment of deep vein thrombosis
• Treatment of pulmonary embolism

Dosage

Adults: For the prophylaxis of venous thromboembolism following knee replacement surgery: 10 mg once daily for 2 weeks, starting 6–10 hours

Mechanism of action

Rivaroxaban competitively inhibits both free and clot-bound factor Xa. Factor Xa is essential for the conversion of prothrombin to thrombin, which is necessary for fibrinogen to be activated into fibrin, leading to clot formation. By inhibiting factor Xa, rivaroxaban effectively terminates the amplification of thrombin generation, preventing thrombus formation. Its action is irreversible and does not require a cofactor, distinguishing it from other anticoagulants like heparin.

Pharmacodynamics

Rivaroxaban exhibits anticoagulant properties by directly binding to factor Xa. This binding prevents the activation of prothrombin, thereby blocking the coagulation cascade and thrombus formation. Unlike traditional anticoagulants, rivaroxaban does not utilize antithrombin III to exert its effects, and it is administered orally, making it more convenient compared to parenteral anticoagulants.

Pharmacokinetics

Rivaroxaban is rapidly absorbed and reaches peak plasma concentrations within 2-4 hours after oral administration. It is extensively metabolized in the liver, primarily by CYP3A4 and CYP2J2, and is also a substrate for P-glycoprotein. The half-life of rivaroxaban is approximately 5-9 hours in healthy individuals, and it is excreted via both renal and fecal routes, with about 66% excreted as metabolites and 28% as unchanged drug.

Contra-indications

• Active bleeding
• Bacterial endocarditis
• Active gastrointestinal ulcer

Adverse effects

• Anaemia
• Haemorrhage
• Chest pain
• Dyspnoea
• Fever
• Hepatic function abnormality
• Nausea
• Oedema
• Platelet abnormalities
• Thrombocytopenia
• Vomiting
• Wound secretion
• Anxiety
• Confusion
• Constipation
• Cough
• Diarrhoea
• Dizziness
• Drowsiness
• Fatigue
• Gastritis
• Gastrointestinal discomfort
• Genital oedema
• Headache
• Hyperbilirubinaemia
• Hypersensitivity
• Hypokalaemia
• Hypotension
• Leg pain
• Post procedural infection
• Syncope
• Vasodilation
• Vertigo

Interactions

• tucatinib+rivaroxaban: Moderate (increases exposure)
• vemurafenib+rivaroxaban: Moderate (increases exposure)
• antiarrhythmics+rivaroxaban: Unknown (increases exposure)
• antiepileptics (carbamazepine, phenobarbital, phenytoin, primidone)+rivaroxaban: Unknown (decreases exposure)
• ciclosporin+rivaroxaban: Unknown (increases exposure)
• mitotane+rivaroxaban: Unknown (decreases exposure)
• NNRTIs+rivaroxaban: Unknown (decreases exposure)
• St. John's Wort+rivaroxaban: Unknown (decreases exposure)

Precautions

• Elderly patients
• Low body weight
• Spinal or epidural anaesthesia (risk of spinal haematoma)
• Patients with a history of bleeding disorders
• Patients undergoing percutaneous coronary intervention
• Patients with renal impairment

Pregnancy

Manufacturer advises to avoid unless potential benefit outweighs possible risk-no information available.

Breast-feeding

Present in milk in animal

Dosage

Children: Refer to specific product information for dosing guidelines.

Adults: Refer to specific product information for dosing guidelines.

Pregnancy

Consult healthcare provider for specific information regarding use during pregnancy.

Breast-feeding

Consult healthcare provider for specific information regarding use during breastfeeding.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Hypovolemic shock
• Severe burns
• Postoperative fluid replacement
• Sepsis
• Trauma management

Dosage

Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Mechanism of action

Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.

Pharmacodynamics

The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.

Pharmacokinetics

Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.

Adverse effects

• Allergic reactions
• Injection site reactions
• Nausea
• Vomiting
• Headache
• Fever

Precautions

• Use with caution in patients with known allergies to any component of the formulation
• Monitor for signs of hypersensitivity during administration
• Consider volume overload in patients with cardiac or renal impairment

Pregnancy

The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.

Storage

Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.

Formulations

• Colloidal silver
• Colloidal gold
• Colloidal iron
• Other metal colloids

Indications

• Used as a disintegrant in tablet formulations
• Improves dissolution of active pharmaceutical ingredients
• Facilitates the breakdown of solid dosage forms

Dosage

Children: Refer to specific product information for dosing guidelines, as croscarmelose is used as an excipient and not dosed independently.

Adults: Refer to specific product information for dosing guidelines, as croscarmelose is used as an excipient and not dosed independently.

Mechanism of action

Croscarmelose functions by rapidly absorbing water and swelling upon hydration. This swelling action creates pressure within the tablet, leading to disintegration into smaller particles. The increased surface area of the drug particles enhances dissolution and absorption in the gastrointestinal tract, ultimately improving the pharmacokinetic profile of the active ingredients.

Pharmacodynamics

As a disintegrant, croscarmelose does not exert a pharmacological effect on its own but plays a critical role in the formulation of oral solid dosage forms. Its pharmacodynamic properties are primarily related to its ability to facilitate the release of active ingredients from their dosage forms, thereby influencing the onset and duration of action of the administered medication.

Pharmacokinetics

Croscarmelose is not absorbed systemically when ingested, as it functions primarily within the gastrointestinal tract. It is excreted unchanged in the feces following its role in aiding the dissolution and disintegration of solid dosage forms. Its safety profile is well-established, and it is considered non-toxic, with minimal adverse effects when used in recommended amounts.

Pregnancy

Croscarmelose is generally considered safe for use during pregnancy as it is an inert substance and does not have systemic effects.

Breast-feeding

Croscarmelose is not absorbed systemically and is considered safe for use during breastfeeding.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Formulations

• Tablet
• Capsule
• Powder

Mechanism of action

The exact mechanism of action for dichloride compounds can vary significantly depending on the specific drug. Generally, compounds with similar structures may act by inhibiting specific enzymes or interacting with neurotransmitter systems. Such interactions can modulate various physiological responses, potentially leading to therapeutic effects in conditions such as infections or other diseases.

Pharmacodynamics

Pharmacodynamics of dichloride compounds is determined by their ability to interact with biological targets. These interactions can lead to alterations in cellular signaling pathways, influencing processes such as inflammation, pain modulation, or microbial growth inhibition. The presence of chlorine atoms may enhance lipophilicity, affecting the drug's distribution and potency.

Pharmacokinetics

Pharmacokinetics of dichloride compounds typically involves absorption, distribution, metabolism, and excretion (ADME). Absorption may be affected by the route of administration and the compound’s solubility. Distribution is influenced by the compound's lipophilicity and protein binding. Metabolism often occurs in the liver, with potential pathways including oxidation or conjugation. Excretion may occur via renal or hepatic routes, depending on the specific compound's characteristics.

Indications

• Monitoring respiratory function
• Assessment of metabolic status
• Management of respiratory acidosis
• Management of respiratory alkalosis

Dosage

Children: Dosing for interventions related to carbon dioxide levels in pediatric patients should be guided by clinical protocols and the BNF for Children.

Adults: Dosing for interventions related to carbon dioxide levels is typically based on clinical assessment and individual patient needs. Refer to clinical guidelines for specific scenarios.

Mechanism of action

Carbon dioxide acts primarily as a signaling molecule in the body, influencing respiratory drive and blood pH. It is produced during cellular respiration and is a critical component of the bicarbonate buffering system, which helps maintain acid-base homeostasis. Elevated levels of CO2 in the blood stimulate ventilation in the lungs, increasing the rate of gas exchange and facilitating the removal of excess CO2.

Pharmacodynamics

The pharmacodynamic effects of dioxides, particularly carbon dioxide, are closely related to its concentration in the blood. As CO2 levels increase, it leads to respiratory acidosis, which can stimulate the respiratory centers in the brain to increase ventilation. Conversely, low levels of CO2 can cause respiratory alkalosis, potentially leading to decreased respiratory drive. CO2 also plays a role in vasodilation and can affect blood flow and pressure through its influence on smooth muscle tone.

Pharmacokinetics

Carbon dioxide is produced endogenously during metabolic processes and is transported in the bloodstream primarily in three forms: dissolved in plasma, as bicarbonate ions (HCO3-), and bound to hemoglobin. The half-life of CO2 in the bloodstream is very short due to its rapid exchange with alveolar gas in the lungs. The elimination of CO2 occurs through exhalation, making it a dynamic component of respiratory physiology.

Pregnancy

Data on the effects of dioxide during pregnancy are limited. Caution is advised due to potential risks associated with exposure.

Breast-feeding

Limited data are available regarding the excretion of dioxide in human milk. Caution is recommended.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Indications

• Dry eye syndrome
• Ocular lubrication
• Controlled drug release
• Thickening agent in various formulations

Dosage

Children: Refer to specific product guidelines for detailed dosing information, as dosage may vary based on the formulation and intended use.

Adults: Refer to specific product guidelines for detailed dosing information, as dosage may vary based on the formulation and intended use.

Mechanism of action

Hydroxypropylmethylcellulose acts as a hydrophilic polymer that forms a gel-like consistency when mixed with water. This property is due to its hydroxyl and ether groups that interact with water molecules, enabling it to swell and create a viscous solution. In ocular applications, it provides lubrication and moisture retention, while in oral formulations, it can delay the release of active ingredients, enhancing bioavailability.

Pharmacodynamics

HPMC exhibits properties such as mucoadhesion and bioadhesion, which enhance its effectiveness in drug delivery systems. It interacts with biological membranes, leading to prolonged retention of the drug at the site of action. The viscosity of HPMC solutions can be adjusted by varying the concentration of the polymer, allowing for tailored therapeutic effects.

Pharmacokinetics

Hydroxypropylmethylcellulose is not absorbed systemically after administration. Its pharmacokinetic profile is characterized by its local action at the site of application. The rate of gel formation and viscosity can influence the release kinetics of co-administered drugs, but HPMC itself does not undergo significant metabolism or elimination in the body.

Adverse effects

• Allergic reactions
• Gastrointestinal disturbances
• Headache
• Dizziness

Precautions

• Use with caution in patients with known hypersensitivity to cellulose derivatives
• Consider potential effects on gastrointestinal absorption of other medications

Pregnancy

Safety during pregnancy has not been established. Use only if clearly needed and after assessing risks versus benefits.

Breast-feeding

It is not known if hydroxypropylmethylcellulose is excreted in human milk. Use with caution.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Hydroxypropylmethylcellulose 0.3% ophthalmic solution
• Hydroxypropylmethylcellulose topical gel

Indications

• Skin irritation
• Minor cuts
• Abrasions
• Superficial skin lesions

Dosage

Children: Apply a thin layer to the affected area as needed, following the manufacturer's instructions.

Adults: Apply a thin layer to the affected area as needed, following the manufacturer's instructions.

Mechanism of action

The specific mechanism of action of Instacoat can vary depending on its active ingredients. Generally, topical formulations exhibit local effects by forming a protective layer over the skin, which can help in preventing infection and facilitating the natural healing process. Some ingredients may have anti-inflammatory properties that reduce redness and swelling, while others may promote cellular regeneration and wound healing.

Pharmacodynamics

Instacoat acts locally at the site of application, with minimal systemic absorption. The pharmacodynamic effects are mainly related to the ingredients used in the formulation. These effects can include enhancement of skin hydration, reduction of inflammation, and promotion of tissue regeneration. The overall outcome is improved skin integrity and faster healing of affected areas.

Pharmacokinetics

As a topical agent, Instacoat is primarily applied to the skin, resulting in localized effects. The pharmacokinetics would largely depend on the specific formulation and its active components. Typically, topical medications show limited systemic absorption, ensuring that the primary effects are exerted locally. The onset of action may occur within a few hours following application, with the duration of effect varying based on the formulation and skin characteristics.

Pregnancy

Data on the use of Instacoat during pregnancy is limited. Its use should be considered only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether Instacoat is excreted in human milk. Caution should be exercised when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Antiseptic for skin disinfection
• Solvent in pharmaceutical formulations
• Cleaning agent in laboratories and healthcare settings

Dosage

Children: For pediatric use, consult specific guidelines in the BNF for Children, as dosing may vary based on age, weight, and clinical circumstances.

Adults: For skin antisepsis, apply isopropyl alcohol topically in a concentration of 70% to the affected area. Dosage may vary based on clinical indication and setting.

Mechanism of action

Isopropyl alcohol works primarily as an antiseptic by denaturing proteins and disrupting cell membranes of bacteria, viruses, and fungi, leading to cell lysis and death. Its efficacy is enhanced by the presence of water, which facilitates the penetration of the alcohol into microbial cells.

Pharmacodynamics

Isopropyl alcohol exhibits a rapid onset of action against a variety of pathogens, including gram-positive and gram-negative bacteria, fungi, and some viruses. Its antimicrobial activity is concentration-dependent, with higher concentrations generally providing a broader spectrum of activity. It is commonly used in concentrations ranging from 60% to 90%, with 70% being optimal for disinfection due to its ability to penetrate the cell wall effectively.

Pharmacokinetics

Isopropyl alcohol is readily absorbed through the skin and mucous membranes. After absorption, it is metabolized primarily in the liver to acetone, which is then further metabolized and excreted, mostly via urine. The elimination half-life of isopropyl alcohol varies but is typically around 2 to 3 hours. Its effects can be influenced by factors such as dosage, route of exposure, and individual metabolic differences.

Pregnancy

Isopropyl alcohol should be used with caution during pregnancy. It is a category C drug, indicating that risk cannot be ruled out.

Breast-feeding

Caution is advised when using isopropyl alcohol during breastfeeding, as it is not known if it is excreted in human milk.

Storage

Isopropyl alcohol should be stored at room temperature, away from heat and flame. Keep the container tightly closed and in a well-ventilated area.

Formulations

• Isopropyl alcohol 70% solution
• Isopropyl alcohol 99% solution

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Indications

• Cleansing agent in topical formulations
• Emulsifying agent in cosmetic products
• Foaming agent in shampoos and body washes

Dosage

Children: Refer to specific product formulations for appropriate concentrations and application methods.

Adults: Refer to specific product formulations for appropriate concentrations and application methods.

Mechanism of action

Lauryl sulfate functions as an anionic surfactant. It reduces the surface tension between different substances, allowing for better spreading and wetting. In the context of cleansing, it facilitates the removal of dirt and oils from the skin and hair by emulsifying these substances, thus making them easier to rinse away with water.

Pharmacodynamics

As a surfactant, lauryl sulfate displays properties that can disrupt cellular membranes and alter permeability. This mechanism is beneficial in enhancing the penetration of other therapeutic agents in topical formulations. However, its irritant potential on skin and mucous membranes should be noted, as it can lead to dryness and irritation with prolonged exposure.

Pharmacokinetics

Lauryl sulfate is primarily applied topically and is not intended for systemic absorption. When used in formulations, it acts locally at the site of application. Its absorption through the skin is minimal, and any systemic exposure is limited. Metabolism and excretion pathways are not well-defined for topical applications, as it is largely washed away after use.

Pregnancy

Safety during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Unknown whether lauryl is excreted in human milk. Caution should be exercised when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Methemoglobinemia
• Urinary tract infections
• Laboratory staining agent

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations based on the condition being treated.

Adults: Refer to the BNF for specific dosing recommendations based on the condition being treated.

Mechanism of action

Methylene blue acts as a reducing agent that facilitates the conversion of methemoglobin back to hemoglobin. It does this by donating electrons to the ferric ion in methemoglobin, reducing it to ferrous iron, which restores the molecule's ability to transport oxygen. It also has mild monoamine oxidase inhibitor activity, affecting neurotransmitter metabolism.

Pharmacodynamics

Methylene blue exhibits a variety of pharmacodynamic effects, primarily through its action on hemoglobin. By reducing methemoglobin levels, it improves oxygen delivery to tissues. Additionally, it has been noted to possess properties such as antimicrobial activity and potential neuroprotective effects in certain contexts. The overall effect is a restoration of normal oxygen transport and metabolism.

Pharmacokinetics

Methylene blue is rapidly absorbed after intravenous administration, with peak plasma concentrations occurring shortly after dosing. It is distributed widely in body tissues, including the liver and kidneys. The drug undergoes hepatic metabolism, primarily by the cytochrome P450 system, and is excreted mainly in the urine as metabolites. The elimination half-life is approximately 5 to 6 hours, but this can vary depending on dosage and patient factors.

Pregnancy

Safety in pregnancy has not been established.

Breast-feeding

There is no information available regarding its excretion in human milk.

Storage

Store in a well-closed container in a cool, dry place.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Potential role in bone health
• Support for connective tissue formation
• May aid in mineral metabolism

Dosage

Children: There is no established clinical dosage for silicon in paediatric populations, as it is not classified as an essential nutrient.

Adults: There is no established clinical dosage for silicon in adults, as it is not classified as an essential nutrient.

Mechanism of action

Silicon is believed to enhance the synthesis of glycosaminoglycans and collagen, which are important for the structural integrity of connective tissues. It may also influence the activity of certain enzymes involved in bone mineralization, thus playing a role in maintaining bone density and health.

Pharmacodynamics

The pharmacodynamics of silicon is not fully elucidated; however, it is thought to involve the modulation of bone metabolism and the promotion of connective tissue health. Silicon may have a synergistic effect with other minerals, such as calcium and magnesium, aiding in their utilization and metabolism in the body.

Pharmacokinetics

The pharmacokinetics of silicon is complex, as it is not absorbed through typical gastrointestinal pathways. Instead, silicon is thought to be taken up in the form of silicates and then distributed throughout the body, particularly in connective tissues. The elimination of silicon occurs primarily through renal excretion, with some variations depending on dietary intake and individual metabolism.

Pregnancy

Silicon is generally considered safe during pregnancy, as it is a naturally occurring element in the human body. However, specific recommendations regarding supplementation should be followed based on the advice of a healthcare provider.

Breast-feeding

Silicon is present in breast milk in small amounts. Its safety during breastfeeding is generally regarded as acceptable, although supplementation should be approached with caution and under medical advice.

Storage

Silicon should be stored in a cool, dry place, protected from light and moisture. Follow specific storage recommendations provided by the manufacturer if available.

Dosage

Children: Refer to specific product information for paediatric dosing, as it will depend on the formulation and indication.

Adults: Refer to specific product information for dosing guidance, as it will vary based on formulation and clinical use.

Mechanism of action

The mechanism of action for a universal drug would depend on its specific formulation and intended targets. Generally, such drugs might act on multiple receptors or pathways, potentially modulating immune responses, inflammatory processes, or neurotransmitter systems. The aim would be to exert a beneficial effect across different physiological systems.

Pharmacodynamics

Pharmacodynamics of a universal drug would involve its effects on the body, including the relationship between drug concentration and therapeutic effect. A universal drug may exhibit dose-dependent responses, with efficacy influenced by receptor affinity, intrinsic activity, and the presence of other competing endogenous substances. Side effects may also vary based on the specific biological pathways affected.

Pharmacokinetics

Pharmacokinetics refers to how a drug is absorbed, distributed, metabolized, and excreted in the body. For a universal drug, this could involve varied absorption rates depending on the route of administration, extensive distribution to various tissues, metabolism by liver enzymes, and renal or biliary excretion. Factors such as age, sex, genetic polymorphisms, and comorbid conditions could influence its pharmacokinetic profile.

Pregnancy

Consult with a healthcare provider to evaluate risks versus benefits.

Breast-feeding

Consult with a healthcare provider to evaluate risks versus benefits.

Storage

Store at room temperature, away from moisture and heat.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Rivaroxaban competitively inhibits free and clot bound factor Xa. Factor Xa is needed to activate prothrombin (factor II) to thrombin (factor IIa). Thrombin is a serine protease that is required to activate fibrinogen to fibrin, which is the loose meshwork that completes the clotting process. Since one molecule of factor Xa can generate more than 1000 molecules of thrombin, selective inhibitors of factor Xa are profoundly useful in terminating the amplification of thrombin generation. The action of rivaroxaban is irreversible. Rivaroxaban, an oral, direct activated factor X (Xa) inhibitor, is an anticoagulant. Factor Xa plays a central role in the blood coagulation cascade by serving as the convergence point for the intrinsic and extrinsic pathways; inhibition of coagulation factor Xa by rivaroxaban prevents conversion of prothrombin to thrombin and subsequent thrombus formation. Rivaroxaban inhibits both free and prothrombinase-bound factor Xa. Unlike fondaparinux, heparin, and the low molecular weight heparins, rivaroxaban binds directly to the active site of factor Xa without the need for a cofactor (e.g., antithrombin III). Rivaroxaban inhibits factor Xa with more than 100,000-fold greater selectivity than other biologically important serine proteases (e.g., thrombin, trypsin, plasmin, factor VIIa, factor IXa, urokinase, activated protein C). Xarelto is an orally bioavailable factor Xa inhibitor that selectively blocks the active site of factor Xa and does not require a cofactor (such as Anti-thrombin III) for activity. Activation of factor X to factor Xa (FXa) via the intrinsic and extrinsic pathways plays a central role in the cascade of blood coagulation.

Pharmacodynamics

Rivaroxaban is an anticoagulant which binds directly to factor Xa. Thereafter, it effectively blocks the amplification of the coagulation cascade, preventing the formation of thrombus. Rivaroxaban is a unqiue anticoagulant for two reasons. First of all, it is does not involve antithrombin III (ATIII) to exert its anticoagulant effects. Secondly, it is an oral agent whereas the widely used unfractionated heparin and low molecular weight heparins are for parenteral use only. Although the activated partial thromboplastin time (aPTT) and HepTest (a test developed to assay low molecular weight heparins) are prolonged in a dose-dependant manner, neither test is recommended for the assessment of the pharmacodynamic effects of rivaroxaban. Anti-Xa activity and inhibition of anti-Xa activity monitoring is also not recommended despite being influenced by rivaroxaban.