ROXPINN 20

Indications

• Constipation
• Faecal impaction

Dosage

Children: For children aged 1 month to 5 years, the recommended dosage is 2.5 to 5 mL twice daily. Dosage may vary based on individual response and should be guided by a healthcare professional.

Adults: For adults, the typical dosage is 1 to 2 tablespoons (around 15 to 30 mL) mixed with at least 240 mL of water, taken up to three times daily. It is important to ensure adequate fluid intake to avoid gastrointestinal obstruction.

Mechanism of action

Methylcellulose acts as a bulk-forming laxative by absorbing water in the gastrointestinal tract. This increases the stool's bulk and promotes bowel motility through mechanical stimulation of the intestinal walls, which enhances peristalsis. It does not undergo significant metabolism and directly influences the physical properties of the stool.

Pharmacodynamics

The pharmacodynamic profile of methylcellulose indicates that it increases stool bulk and moisture content, facilitating easier passage of stool. The osmotic effect helps to soften the stool, while the bulk created stimulates intestinal contractions, reducing the time stool remains in the colon and alleviating constipation.

Pharmacokinetics

Methylcellulose is not absorbed systemically as it is a non-digestible fiber. Its effects are localized to the gastrointestinal tract. After oral administration, it acts primarily in the intestines, where it retains water to form a gel-like mass. The onset of action may vary, with effects usually observed within 24 to 72 hours.

Adverse effects

• abdominal discomfort
• bloating
• diarrhea
• nausea

Precautions

• Ensure adequate fluid intake to prevent intestinal blockage.
• Use cautiously in patients with pre-existing gastrointestinal disorders.

Pregnancy

Methylcellulose is generally considered safe during pregnancy. However, it is advisable to consult with a healthcare professional before use.

Breast-feeding

Methylcellulose is excreted in breast milk. Consult a healthcare provider for advice on use while breastfeeding.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Oral liquid
• Granules

Indications

• Prophylaxis of venous thromboembolism following knee replacement surgery
• Prophylaxis of venous thromboembolism following hip replacement surgery
• Treatment of deep vein thrombosis
• Treatment of pulmonary embolism

Dosage

Adults: For the prophylaxis of venous thromboembolism following knee replacement surgery: 10 mg once daily for 2 weeks, starting 6–10 hours

Mechanism of action

Rivaroxaban competitively inhibits both free and clot-bound factor Xa. Factor Xa is essential for the conversion of prothrombin to thrombin, which is necessary for fibrinogen to be activated into fibrin, leading to clot formation. By inhibiting factor Xa, rivaroxaban effectively terminates the amplification of thrombin generation, preventing thrombus formation. Its action is irreversible and does not require a cofactor, distinguishing it from other anticoagulants like heparin.

Pharmacodynamics

Rivaroxaban exhibits anticoagulant properties by directly binding to factor Xa. This binding prevents the activation of prothrombin, thereby blocking the coagulation cascade and thrombus formation. Unlike traditional anticoagulants, rivaroxaban does not utilize antithrombin III to exert its effects, and it is administered orally, making it more convenient compared to parenteral anticoagulants.

Pharmacokinetics

Rivaroxaban is rapidly absorbed and reaches peak plasma concentrations within 2-4 hours after oral administration. It is extensively metabolized in the liver, primarily by CYP3A4 and CYP2J2, and is also a substrate for P-glycoprotein. The half-life of rivaroxaban is approximately 5-9 hours in healthy individuals, and it is excreted via both renal and fecal routes, with about 66% excreted as metabolites and 28% as unchanged drug.

Contra-indications

• Active bleeding
• Bacterial endocarditis
• Active gastrointestinal ulcer

Adverse effects

• Anaemia
• Haemorrhage
• Chest pain
• Dyspnoea
• Fever
• Hepatic function abnormality
• Nausea
• Oedema
• Platelet abnormalities
• Thrombocytopenia
• Vomiting
• Wound secretion
• Anxiety
• Confusion
• Constipation
• Cough
• Diarrhoea
• Dizziness
• Drowsiness
• Fatigue
• Gastritis
• Gastrointestinal discomfort
• Genital oedema
• Headache
• Hyperbilirubinaemia
• Hypersensitivity
• Hypokalaemia
• Hypotension
• Leg pain
• Post procedural infection
• Syncope
• Vasodilation
• Vertigo

Interactions

• tucatinib+rivaroxaban: Moderate (increases exposure)
• vemurafenib+rivaroxaban: Moderate (increases exposure)
• antiarrhythmics+rivaroxaban: Unknown (increases exposure)
• antiepileptics (carbamazepine, phenobarbital, phenytoin, primidone)+rivaroxaban: Unknown (decreases exposure)
• ciclosporin+rivaroxaban: Unknown (increases exposure)
• mitotane+rivaroxaban: Unknown (decreases exposure)
• NNRTIs+rivaroxaban: Unknown (decreases exposure)
• St. John's Wort+rivaroxaban: Unknown (decreases exposure)

Precautions

• Elderly patients
• Low body weight
• Spinal or epidural anaesthesia (risk of spinal haematoma)
• Patients with a history of bleeding disorders
• Patients undergoing percutaneous coronary intervention
• Patients with renal impairment

Pregnancy

Manufacturer advises to avoid unless potential benefit outweighs possible risk-no information available.

Breast-feeding

Present in milk in animal

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Protection of active ingredients in pharmaceutical formulations
• Enhancement of drug stability
• Improvement of palatability in oral dosage forms
• Facilitation of swallowing for patients with difficulty
• Controlled release of active substances

Dosage

Children: Refer to specific product information for pediatric dosing recommendations, as this varies widely based on the formulation and active ingredient.

Adults: Refer to specific product information for dosing instructions, as this varies based on the formulation and active ingredient.

Mechanism of action

The mechanism of action for coated formulations generally involves the creation of a barrier that protects the active pharmaceutical ingredient from environmental factors like moisture and oxygen. In some cases, the coating may also control the release of the drug, allowing for extended or modified release profiles that enhance therapeutic effects. Specific coatings might interact with the gastrointestinal environment, affecting solubility and absorption rates.

Pharmacodynamics

Pharmacodynamics of coated formulations can vary widely depending on the active ingredient and the nature of the coating itself. Coatings may be designed to dissolve at specific pH levels, ensuring that the drug is released in the optimal environment for absorption. The protective nature of the coat can also affect the bioavailability of the active compound, influencing its efficacy and safety profile.

Pharmacokinetics

Pharmacokinetics of coated drugs involve considerations of absorption, distribution, metabolism, and excretion. The coating can alter the rate of drug absorption, with some coatings designed to delay release until the drug reaches the intestines. The distribution of the drug throughout the body may also be affected by the coating, as it can influence the solubility and stability of the drug in systemic circulation. Metabolism and excretion can be influenced by the characteristics of the coating material and the nature of the active ingredient.

Pregnancy

Consult healthcare provider before use. Limited data available on safety.

Breast-feeding

Consult healthcare provider before use. Limited data available on safety.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Used as a disintegrant in tablet formulations
• Improves dissolution of active pharmaceutical ingredients
• Facilitates the breakdown of solid dosage forms

Dosage

Children: Refer to specific product information for dosing guidelines, as croscarmelose is used as an excipient and not dosed independently.

Adults: Refer to specific product information for dosing guidelines, as croscarmelose is used as an excipient and not dosed independently.

Mechanism of action

Croscarmelose functions by rapidly absorbing water and swelling upon hydration. This swelling action creates pressure within the tablet, leading to disintegration into smaller particles. The increased surface area of the drug particles enhances dissolution and absorption in the gastrointestinal tract, ultimately improving the pharmacokinetic profile of the active ingredients.

Pharmacodynamics

As a disintegrant, croscarmelose does not exert a pharmacological effect on its own but plays a critical role in the formulation of oral solid dosage forms. Its pharmacodynamic properties are primarily related to its ability to facilitate the release of active ingredients from their dosage forms, thereby influencing the onset and duration of action of the administered medication.

Pharmacokinetics

Croscarmelose is not absorbed systemically when ingested, as it functions primarily within the gastrointestinal tract. It is excreted unchanged in the feces following its role in aiding the dissolution and disintegration of solid dosage forms. Its safety profile is well-established, and it is considered non-toxic, with minimal adverse effects when used in recommended amounts.

Pregnancy

Croscarmelose is generally considered safe for use during pregnancy as it is an inert substance and does not have systemic effects.

Breast-feeding

Croscarmelose is not absorbed systemically and is considered safe for use during breastfeeding.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Formulations

• Tablet
• Capsule
• Powder

Indications

• Tablet formulation
• Capsule formulation
• Rapid release of active pharmaceutical ingredients

Dosage

Children: Refer to specific product guidelines for exact formulations. Typically used in concentrations of 1-5% in solid dosage forms.

Adults: Refer to specific product guidelines for exact formulations. Typically used in concentrations of 1-5% in solid dosage forms.

Mechanism of action

Crosscarmellose sodium works by swelling upon contact with water, leading to the rapid disintegration of the dosage form. This process increases the surface area of the active ingredient, promoting faster dissolution and absorption in the gastrointestinal tract. It does not possess any pharmacological activity of its own but acts as a functional excipient.

Pharmacodynamics

As a disintegrant, crosscarmellose sodium aids in the breakdown of solid dosage forms, allowing for quicker release and absorption of active ingredients. Its effectiveness is influenced by factors such as the formulation's composition, the presence of other excipients, and the conditions within the gastrointestinal environment.

Pharmacokinetics

Crosscarmellose sodium is not absorbed in the gastrointestinal tract and does not undergo metabolism. It functions primarily as a physical agent that enhances the disintegration of the dosage form. Its safety profile is well-established, and it is considered non-toxic and non-irritating.

Pregnancy

Crosscarmellose is considered safe for use during pregnancy as it is not systemically absorbed, but consult a healthcare provider for specific cases.

Breast-feeding

Crosscarmellose is not absorbed systemically and is generally considered safe during breastfeeding, but consult a healthcare provider for specific cases.

Storage

Store in a cool, dry place away from moisture and heat.

Formulations

• Tablets
• Capsules
• Powders

Indications

• Used as an excipient in pharmaceutical formulations
• Improves solubility and stability of active ingredients
• Facilitates drug absorption

Dosage

Children: Refer to specific product guidelines as hydroxypropyl is typically used as an excipient and not dosed independently.

Adults: Refer to specific product guidelines as hydroxypropyl is typically used as an excipient and not dosed independently.

Mechanism of action

Hydroxypropyl functions primarily as a solubilizing agent, which aids in the dissolution of poorly soluble drugs. It interacts with water and other solvents to improve the dispersion of pharmaceutical compounds, thereby enhancing their bioavailability. Hydroxypropyl may also facilitate the permeability of drug molecules through biological membranes, contributing to their overall efficacy.

Pharmacodynamics

The pharmacodynamics of hydroxypropyl relate to its role in improving the physicochemical properties of drug formulations. By increasing solubility and stability, hydroxypropyl can enhance the absorption of drugs administered via various routes, including oral and topical. Its non-toxic nature allows for safe incorporation into formulations, making it suitable for a wide range of applications.

Pharmacokinetics

The pharmacokinetics of hydroxypropyl have not been extensively studied as it primarily acts as an excipient rather than an active pharmaceutical ingredient. When used in formulations, it is typically not absorbed into systemic circulation in significant amounts, thereby minimizing potential systemic effects. Hydroxypropyl is generally regarded as safe when used in appropriate amounts in drug formulations.

Pregnancy

Hydroxypropyl is not classified for use during pregnancy, and its safety has not been established. Caution is advised.

Breast-feeding

There is limited information on the excretion of hydroxypropyl in human milk. Caution is advised when administering to breastfeeding women.

Storage

Store in a cool, dry place, away from light. Keep out of reach of children.

Indications

• Dry eye syndrome
• Ocular surface disorders
• Eye irritation
• Contact lens discomfort

Dosage

Children: Refer to specific product instructions for paediatric dosage, as recommendations can vary widely based on age and clinical condition.

Adults: Refer to specific product instructions for adult dosage, which may vary based on formulation and severity of symptoms.

Mechanism of action

Insta works primarily by lubricating the ocular surface, which helps to alleviate dryness and discomfort. The active ingredients often mimic natural tears, providing moisture and aiding in the maintenance of the tear film, thereby improving eye comfort and visual clarity.

Pharmacodynamics

The pharmacodynamics of Insta involve the interaction of its components with the ocular surface, enhancing tear film stability and reducing the symptoms of dryness. The formulation may also reduce inflammation and irritation by providing a protective barrier over the eye.

Pharmacokinetics

The pharmacokinetics of Insta can vary depending on its specific formulation. Generally, the components are designed for local action, with minimal systemic absorption. The onset of action is typically rapid, with effects lasting for a variable duration depending on the specific formulation and the severity of symptoms.

Pregnancy

Consult a healthcare provider before use, as safety in pregnancy has not been established.

Breast-feeding

Consult a healthcare provider before use, as it is unknown if it is excreted in human milk.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Indications

• Cleansing agent in topical formulations
• Emulsifying agent in cosmetic products
• Foaming agent in shampoos and body washes

Dosage

Children: Refer to specific product formulations for appropriate concentrations and application methods.

Adults: Refer to specific product formulations for appropriate concentrations and application methods.

Mechanism of action

Lauryl sulfate functions as an anionic surfactant. It reduces the surface tension between different substances, allowing for better spreading and wetting. In the context of cleansing, it facilitates the removal of dirt and oils from the skin and hair by emulsifying these substances, thus making them easier to rinse away with water.

Pharmacodynamics

As a surfactant, lauryl sulfate displays properties that can disrupt cellular membranes and alter permeability. This mechanism is beneficial in enhancing the penetration of other therapeutic agents in topical formulations. However, its irritant potential on skin and mucous membranes should be noted, as it can lead to dryness and irritation with prolonged exposure.

Pharmacokinetics

Lauryl sulfate is primarily applied topically and is not intended for systemic absorption. When used in formulations, it acts locally at the site of application. Its absorption through the skin is minimal, and any systemic exposure is limited. Metabolism and excretion pathways are not well-defined for topical applications, as it is largely washed away after use.

Pregnancy

Safety during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Unknown whether lauryl is excreted in human milk. Caution should be exercised when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Dosage

Children: Refer to specific product information for paediatric dosing, as it will depend on the formulation and indication.

Adults: Refer to specific product information for dosing guidance, as it will vary based on formulation and clinical use.

Mechanism of action

The mechanism of action for a universal drug would depend on its specific formulation and intended targets. Generally, such drugs might act on multiple receptors or pathways, potentially modulating immune responses, inflammatory processes, or neurotransmitter systems. The aim would be to exert a beneficial effect across different physiological systems.

Pharmacodynamics

Pharmacodynamics of a universal drug would involve its effects on the body, including the relationship between drug concentration and therapeutic effect. A universal drug may exhibit dose-dependent responses, with efficacy influenced by receptor affinity, intrinsic activity, and the presence of other competing endogenous substances. Side effects may also vary based on the specific biological pathways affected.

Pharmacokinetics

Pharmacokinetics refers to how a drug is absorbed, distributed, metabolized, and excreted in the body. For a universal drug, this could involve varied absorption rates depending on the route of administration, extensive distribution to various tissues, metabolism by liver enzymes, and renal or biliary excretion. Factors such as age, sex, genetic polymorphisms, and comorbid conditions could influence its pharmacokinetic profile.

Pregnancy

Consult with a healthcare provider to evaluate risks versus benefits.

Breast-feeding

Consult with a healthcare provider to evaluate risks versus benefits.

Storage

Store at room temperature, away from moisture and heat.

Mechanism of action

Rivaroxaban competitively inhibits free and clot bound factor Xa. Factor Xa is needed to activate prothrombin (factor II) to thrombin (factor IIa). Thrombin is a serine protease that is required to activate fibrinogen to fibrin, which is the loose meshwork that completes the clotting process. Since one molecule of factor Xa can generate more than 1000 molecules of thrombin, selective inhibitors of factor Xa are profoundly useful in terminating the amplification of thrombin generation. The action of rivaroxaban is irreversible. Rivaroxaban, an oral, direct activated factor X (Xa) inhibitor, is an anticoagulant. Factor Xa plays a central role in the blood coagulation cascade by serving as the convergence point for the intrinsic and extrinsic pathways; inhibition of coagulation factor Xa by rivaroxaban prevents conversion of prothrombin to thrombin and subsequent thrombus formation. Rivaroxaban inhibits both free and prothrombinase-bound factor Xa. Unlike fondaparinux, heparin, and the low molecular weight heparins, rivaroxaban binds directly to the active site of factor Xa without the need for a cofactor (e.g., antithrombin III). Rivaroxaban inhibits factor Xa with more than 100,000-fold greater selectivity than other biologically important serine proteases (e.g., thrombin, trypsin, plasmin, factor VIIa, factor IXa, urokinase, activated protein C). Xarelto is an orally bioavailable factor Xa inhibitor that selectively blocks the active site of factor Xa and does not require a cofactor (such as Anti-thrombin III) for activity. Activation of factor X to factor Xa (FXa) via the intrinsic and extrinsic pathways plays a central role in the cascade of blood coagulation.

Pharmacodynamics

Rivaroxaban is an anticoagulant which binds directly to factor Xa. Thereafter, it effectively blocks the amplification of the coagulation cascade, preventing the formation of thrombus. Rivaroxaban is a unqiue anticoagulant for two reasons. First of all, it is does not involve antithrombin III (ATIII) to exert its anticoagulant effects. Secondly, it is an oral agent whereas the widely used unfractionated heparin and low molecular weight heparins are for parenteral use only. Although the activated partial thromboplastin time (aPTT) and HepTest (a test developed to assay low molecular weight heparins) are prolonged in a dose-dependant manner, neither test is recommended for the assessment of the pharmacodynamic effects of rivaroxaban. Anti-Xa activity and inhibition of anti-Xa activity monitoring is also not recommended despite being influenced by rivaroxaban.