SciTag Duo 50/850mg Film-Coated Tablets

Indications

• Type 2 diabetes mellitus
• Gestational diabetes
• Management of pre-existing diabetes in pregnant women

Dosage

Children: For children aged 10 years and older, the usual starting dose is 500 mg taken with food, with gradual increases based on clinical response. Refer to the BNF for Children for specific dosing recommendations.

Adults: The initial dose is usually 500 mg to 1,000 mg taken orally with food, and the dosage may be gradually increased based on glycemic control and tolerance, with a maximum daily dose typically not exceeding 2,000 mg.

Mechanism of action

Metformin decreases hepatic glucose production and increases peripheral glucose utilization. It does not stimulate insulin release from the pancreas, making it antihyperglycemic rather than hypoglycemic. The drug also interacts with SIRT1, a protein involved in bile acid metabolism, contributing to its effects on glucose homeostasis.

Pharmacodynamics

Metformin improves glycemic control in patients with type 2 diabetes by reducing fasting and postprandial plasma glucose levels. It acts by decreasing intestinal absorption of glucose, increasing insulin sensitivity, and enhancing peripheral glucose uptake and utilization, without causing hypoglycemia.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract and is excreted unchanged in the urine. It has a half-life of about 6 hours and does not undergo significant metabolism. The drug's pharmacokinetics can be affected by renal function, and caution is advised in patients with renal impairment.

Contra-indications

• Severe renal impairment (creatinine clearance less than 25 mL/minute)
• Acute or chronic metabolic acidosis, including diabetic ketoacidosis
• Hypersensitivity to metformin or any of its components

Adverse effects

• Nausea
• Vomiting
• Diarrhea
• Abdominal pain
• Lactic acidosis (rare)
• Hepatic disorders (rare)
• Oedema (rare)
• Acute generalised exanthematous pustulosis (very rare)
• Thrombocytopenia (very rare)

Interactions

• Angiotensin-converting enzyme inhibitors and angiotensin II receptor antagonists may require monitoring and adjustments
• Antacids containing magnesium and aluminium salts may reduce the absorption of metformin
• Concomitant use with other antihyperglycemic agents requires careful monitoring for hypoglycemia

Precautions

• Caution in patients with hepatic impairment
• Monitor liver function regularly during treatment
• Patients should be advised to discontinue use in the event of significant illness, especially dehydration or infections

Pregnancy

Avoid use during pregnancy. Women planning to become pregnant should discontinue metformin and consult a healthcare provider for safer alternatives.

Breast-feeding

Avoid use during breastfeeding. Metformin is excreted in breast milk, and its effects on a nursing infant are unknown.

Storage

Store in a cool, dry place, below 25°C. Protect from light.

Formulations

• Metformin hydrochloride 500 mg tablets
• Metformin hydrochloride 850 mg tablets
• Metformin hydrochloride 1000 mg tablets

Indications

• Type 2 diabetes mellitus as monotherapy if metformin is inappropriate
• Type 2 diabetes mellitus in combination with other antidiabetic drugs including insulin if glycemic control is not adequate with metformin alone

Dosage

Adults: 50 mg twice daily, or 100 mg once daily if used as monotherapy. In cases of renal impairment, reduce dose to 50 mg once daily.

Mechanism of action

Vildagliptin selectively inhibits the enzyme dipeptidyl peptidase-4 (DPP-4), which inactivates incretin hormones GLP-1 and GIP. By prolonging the half-life of these hormones, vildagliptin enhances insulin secretion in a glucose-dependent manner and reduces glucagon secretion. This leads to improved glucose homeostasis, reduction in fasting and postprandial glucose levels, and improved glycemic control in patients with type 2 diabetes mellitus.

Pharmacodynamics

Vildagliptin promotes glycemic control by increasing beta-cell sensitivity to glucose, enhancing glucose-dependent insulin secretion, and improving the insulin to glucagon ratio. It also decreases hepatic glucose production while having no effect on gastric emptying. Clinical studies have shown it effectively lowers glycated hemoglobin (HbA1c) and fasting plasma glucose levels in individuals with type 2 diabetes.

Pharmacokinetics

Vildagliptin is rapidly absorbed after oral administration, with peak plasma concentrations occurring within 1-2 hours. It has a half-life of approximately 2-3 hours. The drug is primarily excreted via the kidneys, with dose adjustments required for patients with renal impairment. It does not require adjustment for hepatic impairment. The pharmacokinetics may vary based on age and renal function.

Contra-indications

• History of pancreatitis
• Severe heart failure

Adverse effects

• Headache
• Dizziness
• Constipation
• Skin reactions
• Angioedema
• Back pain
• Cutaeous vasculitis
• Joint disorders
• Myalgia
• Acute pancreatitis
• Acute renal impairment
• Stevens-Johnson syndrome
• Vomiting

Interactions

• Dose of concomitant sulfonylurea or insulin may need to be reduced

Precautions

• Monitor renal function before treatment and periodically thereafter

Pregnancy

Avoid-toxicity in animal studies.

Breast-feeding

Avoid-present in milk in animal studies.

Storage

Store in a cool, dry place away from light.

Formulations

• Tablets: 50 mg
• Tablets: 100 mg

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Protection of drugs from degradation
• Taste masking
• Controlled release of active ingredients
• Improvement of patient compliance
• Targeted delivery of medications

Dosage

Children: Refer to specific product labeling for dosing information, as this varies widely based on formulation and indication.

Adults: Refer to specific product labeling for dosing information, as this varies widely based on formulation and indication.

Mechanism of action

The mechanism of action of coatings primarily involves the modification of drug release profiles. By altering the solubility and permeability of the drug through the coating material, the release rate can be controlled. For example, enteric coatings prevent drug dissolution in the acidic environment of the stomach, allowing the drug to be released in the more neutral pH of the intestine.

Pharmacodynamics

Pharmacodynamics of coated formulations can vary significantly based on the type of coating used. Immediate-release coatings dissolve quickly, leading to rapid absorption and onset of action. Controlled-release coatings are designed to dissolve slowly over time, providing a sustained release of the drug, which can lead to prolonged therapeutic effects and reduced dosing frequency. The choice of coating material and thickness influences the overall pharmacodynamic profile of the drug.

Pharmacokinetics

The pharmacokinetics of coated drugs are influenced by the coating material and the drug itself. Factors such as the rate of dissolution, absorption site, and first-pass metabolism play critical roles. Coatings can alter the bioavailability and distribution of the drug. For example, enteric coatings can enhance the absorption of drugs that are unstable in acidic conditions, potentially increasing their bioavailability when the drug reaches the intestine.

Pregnancy

Safety in pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Caution is advised as it is not known whether it passes into breast milk.

Storage

Store in a cool, dry place, away from light. Keep out of reach of children.

Indications

• Used as a disintegrant in tablet formulations
• Enhances the bioavailability of active pharmaceutical ingredients

Dosage

Children: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Adults: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Mechanism of action

Croscarmellose sodium works by swelling and absorbing water when it comes into contact with gastrointestinal fluids. This swelling leads to the rapid disintegration of the tablet or capsule matrix, facilitating the release and absorption of the active pharmaceutical ingredients.

Pharmacodynamics

Croscarmellose sodium is classified as a superdisintegrant. Its ability to rapidly disintegrate solid dosage forms can significantly enhance the dissolution rate of the active ingredient, which is crucial for achieving therapeutic effects in a timely manner.

Pharmacokinetics

Croscarmellose sodium is not absorbed in the gastrointestinal tract and does not exert pharmacological effects in the body. It is considered non-toxic and is excreted unchanged. Its main role is as an excipient, influencing the formulation's characteristics rather than the pharmacokinetics of the active ingredients.

Precautions

• Use with caution in patients with known hypersensitivity to croscarmellose or its components.

Pregnancy

Safety in pregnancy has not been established. Use only if clearly needed.

Breast-feeding

Caution is advised when using during breastfeeding, as safety has not been established.

Storage

Store in a cool, dry place, away from moisture and heat.

Formulations

• Powder
• Granules

Indications

• Ophthalmic solutions
• Topical formulations
• Oral solid dosage forms
• Stabilizer in various pharmaceutical preparations

Dosage

Children: Refer to specific product guidelines for dosing information, as it can vary based on formulation and intended use.

Adults: Refer to specific product guidelines for dosing information, as it can vary based on formulation and intended use.

Mechanism of action

Hydroxypropylcellulose functions primarily as a viscosity-increasing agent. When dissolved in water, it forms a gel-like consistency that helps to stabilize formulations. Its mechanism is related to its ability to create a hydrated film, which can enhance the retention of active ingredients and improve the delivery of medications to the targeted area, particularly in ocular applications.

Pharmacodynamics

The pharmacodynamic properties of hydroxypropylcellulose are primarily related to its physical characteristics rather than specific receptor interactions. It exhibits properties such as gel formation and moisture retention, which can enhance the stability and effectiveness of drug formulations. Its viscosity can influence the release rates of active pharmaceutical ingredients, thereby affecting the overall therapeutic effect.

Pharmacokinetics

Hydroxypropylcellulose is not systemically absorbed when used in pharmaceutical applications, as it acts locally at the site of application. Its pharmacokinetics involves dissolution and gel formation in the presence of water, with no significant metabolic pathways or excretion processes, given its large molecular structure. The duration of action is primarily influenced by the formulation and the concentration used.

Pregnancy

Hydroxypropylcellulose is generally considered safe for use during pregnancy as it is not systemically absorbed. However, it should be used only when clearly needed.

Breast-feeding

Hydroxypropylcellulose is not absorbed systemically and is considered safe for use during breastfeeding.

Storage

Store in a cool, dry place, away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Ophthalmic solutions
• Topical gels
• Oral capsules
• Powders for reconstitution

Indications

• Lactose intolerance
• As a filler or excipient in pharmaceutical formulations

Dosage

Children: Refer to the BNF for Children for specific dosing information based on age and clinical context.

Adults: Refer to the BNF for specific dosing information based on clinical context.

Mechanism of action

Lactose is metabolized in the intestine by the enzyme lactase into its constituent monosaccharides, glucose and galactose. In individuals with lactase deficiency, unabsorbed lactose passes into the colon, where it is fermented by bacteria, leading to gas production and osmotic effects that contribute to diarrhea.

Pharmacodynamics

The pharmacodynamics of lactose are primarily related to its effects on gastrointestinal function. In healthy individuals, lactose is effectively broken down into glucose and galactose, which are absorbed and utilized for energy. In individuals with lactose intolerance, the unabsorbed lactose can cause osmotic diarrhea and colonic fermentation, leading to discomfort and symptoms associated with lactose intolerance.

Pharmacokinetics

Lactose is not absorbed in the gastrointestinal tract until it is hydrolyzed into glucose and galactose by lactase. The absorption of glucose and galactose occurs in the small intestine. The half-life is not applicable as lactose is not typically administered as a medication but is rather ingested as a natural component of food. Its metabolism primarily occurs in the intestine.

Adverse effects

• Bloating
• Diarrhea
• Abdominal pain
• Flatulence

Precautions

• Use with caution in patients with lactose intolerance.
• Consider potential for gastrointestinal upset in sensitive individuals.

Pregnancy

Lactose is generally considered safe for use during pregnancy. However, consult a healthcare professional for individual advice.

Breast-feeding

Lactose is safe to use while breastfeeding, as it is a natural sugar present in breast milk.

Storage

Store in a cool, dry place, away from direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Syrup

Dosage

Children: Refer to specific drug formulations and their respective dosing guidelines.

Adults: Refer to specific drug formulations and their respective dosing guidelines.

Mechanism of action

The mechanism of action for any specific material will depend on the particular active ingredient or excipient in question. For active pharmaceutical ingredients, mechanisms can range from receptor binding and enzyme inhibition to modulation of ion channels, depending on the therapeutic goal. Excipients may serve various roles such as stabilizers, fillers, or binders, facilitating the delivery of the active drug.

Pharmacodynamics

Pharmacodynamics varies widely among different materials. For active ingredients, it reflects their interaction with biological systems, including dose-response relationships and the time course of therapeutic effects. This may involve receptor activation, signal transduction pathways, or metabolic pathways influencing physiological responses. For excipients, pharmacodynamic effects are usually minimal but can affect the release and absorption profiles of the active ingredient.

Pharmacokinetics

Pharmacokinetics of materials, especially active ingredients, involves the study of absorption, distribution, metabolism, and excretion (ADME). Factors influencing pharmacokinetics include the route of administration, formulation characteristics, and patient-specific variables such as age, weight, and organ function. For excipients, their impact on pharmacokinetics is often related to their role in formulation, such as altering the absorption of the active drug.

Indications

• Type 2 diabetes mellitus
• Polycystic ovary syndrome (PCOS)

Dosage

Children: The

Adults: The usual starting dose of metformin for adults is 500 mg taken orally twice a day or 850 mg once daily, with gradual increases based on tolerance and blood glucose levels. The maximum recommended daily dose is 2000-3000 mg, depending on the formulation used.

Mechanism of action

Metformin decreases blood glucose levels by decreasing hepatic glucose production (gluconeogenesis), decreasing intestinal absorption of glucose, and increasing insulin sensitivity, which enhances peripheral glucose uptake and utilization. It is known to inhibit mitochondrial complex I activity, leading to increased AMP:ATP ratios that activate AMP-activated protein kinase (AMPK), a key regulator of glucose metabolism. This activation results in reduced hepatic glucose output and improved cellular glucose uptake.

Pharmacodynamics

Metformin exerts its effects primarily by enhancing insulin sensitivity and reducing glucose production by the liver. Unlike sulfonylureas, which increase insulin secretion, metformin does not cause hyperinsulinemia. Its ability to lower fasting plasma glucose and glycosylated hemoglobin (HbA1c) levels makes it a cornerstone in the management of type 2 diabetes. Clinical studies have shown significant reductions in fasting plasma glucose and HbA1c levels in patients treated with metformin.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract, with peak plasma concentrations typically occurring 2-3 hours after ingestion. It has a bioavailability of approximately 50-60% when administered orally. The drug is primarily eliminated unchanged by the kidneys, and its clearance is proportional to renal function. The half-life of metformin is about 6.5 hours. Accumulation may occur in cases of renal impairment, necessitating caution in patients with reduced renal function.

Adverse effects

• Gastrointestinal disturbances (nausea, vomiting, diarrhea)
• Lactic acidosis
• Vitamin B12 deficiency

Interactions

• dolutegravir+metformin: Moderate (increases exposure)
• cimetidine+metformin: Moderate (increases exposure)
• risdiplam+metformin: Moderate (increases concentration)
• vandetanib+metformin: Moderate (increases exposure)
• bictegravir+metformin: Unknown (increases exposure)
• guanfacine+metformin: Unknown (increases concentration)
• mexiletine+metformin: Unknown (affects exposure)
• pitolisant+metformin: Unknown (increases exposure)
• ribociclib+metformin: Unknown (increases exposure)

Precautions

• Renal impairment
• Dehydration
• Excessive alcohol intake

Pregnancy

Metformin is classified as a Category B medication. It is often used during pregnancy for managing gestational diabetes but should be administered under medical supervision.

Breast-feeding

Metformin is excreted in breast milk, but is generally considered safe for use during breastfeeding. Consult with a healthcare provider for specific guidance.

Storage

Store in a cool, dry place, away from direct light. Keep out of reach of children.

Formulations

• Tablets
• Extended-release tablets
• Oral solution

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Dry skin conditions
• Cosmetic formulations
• Emollient in topical creams and lotions
• Emulsifying agent in pharmaceutical preparations

Dosage

Children: For pediatric use, refer to specific product formulations and guidelines, as dosing may vary based on the formulation and concentration.

Adults: Stearyl alcohol is used topically in various formulations. Specific dosing is typically determined by the formulation and intended use, refer to product guidelines for detailed instructions.

Mechanism of action

Stearyl alcohol functions primarily as an emollient and emulsifier. It aids in the formation of stable emulsions by reducing the surface tension between oil and water phases, allowing for the creation of creams and lotions. Its hydrophobic tail interacts with lipids, while the hydroxyl group can form hydrogen bonds with water, enhancing moisture retention in the skin.

Pharmacodynamics

Stearyl alcohol acts by providing a protective barrier on the skin, reducing transepidermal water loss and enhancing hydration. Its emollient properties make it effective in softening and smoothing the skin, which can alleviate dryness and improve the overall appearance of the skin. Additionally, it can enhance the delivery of other active ingredients in topical formulations.

Pharmacokinetics

Stearyl alcohol is not significantly absorbed systemically when applied topically. Its primary action is local to the site of application, where it exerts its emollient effects. The compound is metabolized in the body to various fatty acids and alcohols, and it is excreted primarily through the skin and gastrointestinal tract, with minimal systemic exposure.

Pregnancy

Stearyl is generally considered safe for use during pregnancy; however, specific formulations should be evaluated for their ingredients.

Breast-feeding

Stearyl can be used while breastfeeding, but it's recommended to consult a healthcare provider for specific concerns regarding topical applications.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Cream
• Ointment
• Lotion

Mechanism of action

Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Metformin has no significant effects on the secretion of glucagon, cortisol, growth hormone or somatostatin. Metformin reduces glucose levels primarily by decreasing hepatic glucose production and by increasing insulin action in muscle and fat. ... May decrease plasma glucose by reducing the absorption of glucose from the intestine. /Salt not specified/ Metformin potentiates the effect of insulin by mechanisms not fully understood. Metformin does not stimulate pancreatic beta cells to increase secretion of insulin; insulin secretion must be present for metformin to work properly. It is postulated that metformin decreases hepatic glucose production and improves insulin sensitivity by increasing peripheral glucose uptake and utilization. /Salt not specified/ People with Type 2 diabetes mellitus (T2DM) have reduced bone mineral density and an increased risk of fractures due to altered mesenchymal stem cell (MSC) differentiation in the bone marrow. This leads to a shift in the balance of differentiation away from bone formation (osteogenesis) in favour of fat cell development (adipogenesis). The commonly used anti-diabetic drug, metformin, activates the osteogenic transcription factor Runt-related transcription factor 2 (Runx2), which may suppress adipogenesis, leading to improved bone health. Here we investigate the involvement of the metabolic enzyme, AMP-activated protein kinase (AMPK), in these protective actions of metformin. The anti-adipogenic actions of metformin were observed in multipotent C3H10T1/2 MSCs, in which metformin exerted reciprocal control over the activities of Runx2 and the adipogenic transcription factor, PPARgamma, leading to suppression of adipogenesis. These effects appeared to be independent of AMPK activation but rather through the suppression of the mTOR/p70S6K signalling pathway. Basal AMPK and mTOR/p70S6K activity did appear to be required for adipogenesis, as demonstrated by the use of the AMPK inhibitor, compound C. This observation was further supported by using AMPK knockout mouse embryo fibroblasts (MEFs) where adipogenesis, as assessed by reduced lipid accumulation and expression of the adipogeneic transcription factor, C/EBPbeta, was found to display an absolute requirement for AMPK. Further activation of AMPK in wild type MEFS, with either metformin or the AMPK-specific activator, A769662, was also associated with suppression of adipogenesis. It appears, therefore, that basal AMPK activity is required for adipogenesis and that metformin can inhibit adipogenesis through AMPK-dependent or -independent mechanisms, depending on the cellular context.

Mechanism of action

Glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic peptide (GIP) are incretin hormones that regulate blood glucose levels and maintain glucose homeostasis. It is estimated that the activity of GLP-1 and GIP contribute more than 70% to the insulin response to an oral glucose challenge. They stimulate insulin secretion in a glucose-dependent manner via G-protein-coupled GIP and GLP-1 receptor signalling. In addition to their effects on insulin secretion, GLP-1 is also involved in promoting islet neogenesis and differentiation, as well as attenuating pancreatic beta-cell apoptosis. Incretin hormones also exert extra-pancreatic effects, such as lipogenesis and myocardial function. In type II diabetes mellitus, GLP-1 secretion is impaired, and the insulinotropic effect of GIP is significantly diminished. Vildagliptin exerts its blood glucose-lowering effects by selectively inhibiting dipeptidyl peptidase-4 (DPP-4), an enzyme that rapidly truncates and inactivates GLP-1 and GIP upon their release from the intestinal cells. DPP-4 cleaves oligopeptides after the second amino acid from the N-terminal end. Inhibition of DPP-4 substantially prolongs the half-life of GLP-1 and GIP, increasing the levels of active circulating incretin hormones. The duration of DPP-4 inhibition by vildagliptin is dose-dependent. Vildagliptin reduces fasting and prandial glucose and HbA1c. It enhances the glucose sensitivity of alpha- and beta-cells and augments glucose-dependent insulin secretion. Fasting and postprandial glucose levels are decreased, and postprandial lipid and lipoprotein metabolism are also improved.

Pharmacodynamics

Vildagliptin works to improve glycemic control in type II diabetes mellitus by enhancing the glucose sensitivity of beta-cells (β-cells) in pancreatic islets and promoting glucose-dependent insulin secretion. Increased GLP-1 levels leads to enhanced sensitivity of alpha cells to glucose, promoting glucagon secretion. Vildagliptin causes an increase in the insulin to glucagon ratio by increasing incretin hormone levels: this results in a decrease in fasting and postprandial hepatic glucose production. Vildagliptin does not affect gastric emptying. It also has no effects on insulin secretion or blood glucose levels in individuals with normal glycemic control. In clinical trials, treatment with vildagliptin 50-100 mg daily in patients with type 2 diabetes significantly improved markers of beta-cells, proinsulin to insulin ratio, and measures of beta-cell responsiveness from the frequently-sampled meal tolerance test. Vildagliptin has improves glycated hemoglobin (HbA1c) and fasting plasma glucose (FPG) levels.

Mechanism of action

Metformin's mechanisms of action are unique from other classes of oral antihyperglycemic drugs. Metformin decreases blood glucose levels by decreasing hepatic glucose production (also called gluconeogenesis), decreasing the intestinal absorption of glucose, and increasing insulin sensitivity by increasing peripheral glucose uptake and utilization. It is well established that metformin inhibits mitochondrial complex I activity, and it has since been generally postulated that its potent antidiabetic effects occur through this mechanism. The above processes lead to a decrease in blood glucose, managing type II diabetes and exerting positive effects on glycemic control. After ingestion, the organic cation transporter-1 (OCT1) is responsible for the uptake of metformin into hepatocytes (liver cells). As this drug is positively charged, it accumulates in cells and in the mitochondria because of the membrane potentials across the plasma membrane as well as the mitochondrial inner membrane. Metformin inhibits mitochondrial complex I, preventing the production of mitochondrial ATP leading to increased cytoplasmic ADP:ATP and AMP:ATP ratios. These changes activate AMP-activated protein kinase (AMPK), an enzyme that plays an important role in the regulation of glucose metabolism. Aside from this mechanism, AMPK can be activated by a lysosomal mechanism involving other activators. Following this process, increases in AMP:ATP ratio also inhibit _fructose-1,6-bisphosphatase_ enzyme, resulting in the inhibition of gluconeogenesis, while also inhibiting _adenylate cyclase_ and decreasing the production of cyclic adenosine monophosphate (cAMP), a derivative of ATP used for cell signaling. Activated AMPK phosphorylates two isoforms of acetyl-CoA carboxylase enzyme, thereby inhibiting fat synthesis and leading to fat oxidation, reducing hepatic lipid stores and increasing liver sensitivity to insulin. In the intestines, metformin increases anaerobic glucose metabolism in enterocytes (intestinal cells), leading to reduced net glucose uptake and increased delivery of lactate to the liver. Recent studies have also implicated the gut as a primary site of action of metformin and suggest that the liver may not be as important for metformin action in patients with type 2 diabetes. Some of the ways metformin may play a role on the intestines is by promoting the metabolism of glucose by increasing glucagon-like peptide I (GLP-1) as well as increasing gut utilization of glucose. In addition to the above pathway, the mechanism of action of metformin may be explained by other ways, and its exact mechanism of action has been under extensive study in recent years. Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Me

Pharmacodynamics

**General effects** Insulin is an important hormone that regulates blood glucose levels. Type II diabetes is characterized by a decrease in sensitivity to insulin, resulting in elevations in blood glucose when the pancreas can no longer compensate. In patients diagnosed with type 2 diabetes, insulin is unable to exert adequate effects on tissues and cells (i.e. insulin resistance) and insulin deficiency may also be present. Metformin reduces hepatic production of glucose, decreases the intestinal absorption of glucose, and enhances insulin sensitivity by increasing both peripheral glucose uptake and utilization. In contrast with drugs of the sulfonylurea class, which lead to hyperinsulinemia, the secretion of insulin is unchanged with metformin use. **Effect on fasting plasma glucose (FPG) and Glycosylated hemoglobin (HbA1c)** HbA1c is an important periodic measure of glycemic control used to monitor diabetic patients. Fasting plasma glucose is also a useful and important measure of glycemic control. In a 29-week clinical trial of subjects diagnosed with type II diabetes, metformin decreased the fasting plasma glucose levels by an average of 59 mg/dL from baseline, compared to an average increase of 6.3 mg/dL from baseline in subjects taking a placebo. Glycosylated hemoglobin (HbA1c) was decreased by about 1.4% in subjects receiving metformin, and increased by 0.4% in subjects receiving placebo only.