METWAVE 500

Indications

• Type 2 diabetes mellitus
• Gestational diabetes
• Management of pre-existing diabetes in pregnant women

Dosage

Children: For children aged 10 years and older, the usual starting dose is 500 mg taken with food, with gradual increases based on clinical response. Refer to the BNF for Children for specific dosing recommendations.

Adults: The initial dose is usually 500 mg to 1,000 mg taken orally with food, and the dosage may be gradually increased based on glycemic control and tolerance, with a maximum daily dose typically not exceeding 2,000 mg.

Mechanism of action

Metformin decreases hepatic glucose production and increases peripheral glucose utilization. It does not stimulate insulin release from the pancreas, making it antihyperglycemic rather than hypoglycemic. The drug also interacts with SIRT1, a protein involved in bile acid metabolism, contributing to its effects on glucose homeostasis.

Pharmacodynamics

Metformin improves glycemic control in patients with type 2 diabetes by reducing fasting and postprandial plasma glucose levels. It acts by decreasing intestinal absorption of glucose, increasing insulin sensitivity, and enhancing peripheral glucose uptake and utilization, without causing hypoglycemia.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract and is excreted unchanged in the urine. It has a half-life of about 6 hours and does not undergo significant metabolism. The drug's pharmacokinetics can be affected by renal function, and caution is advised in patients with renal impairment.

Contra-indications

• Severe renal impairment (creatinine clearance less than 25 mL/minute)
• Acute or chronic metabolic acidosis, including diabetic ketoacidosis
• Hypersensitivity to metformin or any of its components

Adverse effects

• Nausea
• Vomiting
• Diarrhea
• Abdominal pain
• Lactic acidosis (rare)
• Hepatic disorders (rare)
• Oedema (rare)
• Acute generalised exanthematous pustulosis (very rare)
• Thrombocytopenia (very rare)

Interactions

• Angiotensin-converting enzyme inhibitors and angiotensin II receptor antagonists may require monitoring and adjustments
• Antacids containing magnesium and aluminium salts may reduce the absorption of metformin
• Concomitant use with other antihyperglycemic agents requires careful monitoring for hypoglycemia

Precautions

• Caution in patients with hepatic impairment
• Monitor liver function regularly during treatment
• Patients should be advised to discontinue use in the event of significant illness, especially dehydration or infections

Pregnancy

Avoid use during pregnancy. Women planning to become pregnant should discontinue metformin and consult a healthcare provider for safer alternatives.

Breast-feeding

Avoid use during breastfeeding. Metformin is excreted in breast milk, and its effects on a nursing infant are unknown.

Storage

Store in a cool, dry place, below 25°C. Protect from light.

Formulations

• Metformin hydrochloride 500 mg tablets
• Metformin hydrochloride 850 mg tablets
• Metformin hydrochloride 1000 mg tablets

Indications

• Food preservative
• Treatment of urea cycle disorders
• Metabolic disorders involving benzoyl-CoA

Dosage

Children: Refer to the BNF for Children for specific dosing guidelines based on condition.

Adults: Refer to the BNF for specific dosing guidelines based on condition.

Mechanism of action

Benzoate acts mainly by inhibiting the growth of bacteria and fungi through its ability to lower the pH, creating an environment that is less favorable for microbial growth. It is also involved in metabolic pathways where it helps in the conjugation of toxic substances, facilitating their excretion from the body.

Pharmacodynamics

Benzoate is known for its antimicrobial properties, which are particularly effective against a wide range of fungi and bacteria. Its efficacy as a preservative is due to its ability to penetrate microbial cell membranes and disrupt their metabolic processes. Additionally, it has been observed to modulate various metabolic pathways, particularly those associated with aromatic compound degradation.

Pharmacokinetics

After ingestion, benzoate is rapidly absorbed in the gastrointestinal tract. It is metabolized primarily in the liver, where it undergoes conjugation with glycine to form hippurate, which is then excreted in the urine. The half-life of benzoate varies depending on individual metabolic rates but is generally short due to its efficient conversion and excretion.

Pregnancy

There is limited data on the use of benzoate in pregnancy. Consultation with healthcare professionals is advised before use.

Breast-feeding

Limited data is available on the excretion of benzoate in breast milk. Caution is recommended when administering to nursing mothers.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Indications

• Constipation
• Dietary fiber supplementation
• Irritable bowel syndrome
• Diverticular disease
• Weight management

Dosage

Children: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Adults: Refer to appropriate guidelines for specific dosage; generally taken with adequate fluid intake.

Mechanism of action

Cellulose acts primarily as a bulk-forming laxative. It absorbs water in the intestines, which increases stool bulk and stimulates peristalsis, thus facilitating bowel movements. Additionally, cellulose is not digestible by human enzymes, leading to fermentation by gut bacteria, which may enhance gut health and alter gut microbiota composition.

Pharmacodynamics

Cellulose increases stool weight and frequency of bowel movements. It works by retaining water in the intestines, leading to softer stools and improved passage through the gastrointestinal tract. The bulking effect of cellulose can help alleviate constipation and promote overall digestive health. It may also play a role in cholesterol reduction and glycemic control through its effects on digestion and absorption of nutrients.

Pharmacokinetics

Cellulose is not absorbed into the bloodstream due to its indigestible nature. Instead, it passes through the gastrointestinal tract, where it adds bulk to the stool. Its fermentation by colonic bacteria produces short-chain fatty acids, which may have beneficial effects on colon health. The onset of action for cellulose as a laxative can vary but is generally within 24 to 72 hours after ingestion.

Adverse effects

• Bloating
• Flatulence
• Diarrhea
• Abdominal discomfort

Precautions

• Use with caution in patients with a history of gastrointestinal disorders.
• Monitor for potential allergic reactions in sensitive individuals.

Pregnancy

Cellulose is generally considered safe during pregnancy as it is a non-toxic, indigestible fiber.

Breast-feeding

Cellulose is also considered safe during breastfeeding; it is excreted in breast milk in negligible amounts.

Storage

Store in a cool, dry place away from direct sunlight.

Formulations

• Powder
• Capsules
• Tablets
• Granules

Indications

• Hypovolemic shock
• Severe burns
• Postoperative fluid replacement
• Sepsis
• Trauma management

Dosage

Children: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Adults: Refer to established guidelines for specific dosing, as it varies based on the type of colloidal solution used and the clinical condition being treated.

Mechanism of action

Colloidal solutions work by maintaining oncotic pressure in the blood, thus helping to retain fluid within the vascular system. This is primarily due to the large molecular weight of the colloidal particles, which cannot easily pass through capillary walls. The presence of colloids in the blood helps to draw water into the circulation, increasing blood volume and improving tissue perfusion.

Pharmacodynamics

The pharmacodynamics of colloidal solutions are centered on their ability to exert osmotic pressure, which helps maintain blood volume and pressure. This effect is particularly important in conditions such as hypovolemia and shock, where fluid replacement is necessary to restore hemodynamic stability. The efficacy of colloidal solutions can vary depending on the type of colloid used, as well as the underlying clinical condition being treated.

Pharmacokinetics

Colloidal solutions are typically administered intravenously and their pharmacokinetics can vary based on the specific formulation. Generally, colloids are distributed throughout the vascular compartment and have a longer duration of action compared to crystalloids, as they remain in circulation longer. The elimination of colloids is primarily through the reticuloendothelial system, where they are metabolized or eliminated by the liver and spleen. Factors such as particle size and composition can influence their distribution and clearance.

Adverse effects

• Allergic reactions
• Injection site reactions
• Nausea
• Vomiting
• Headache
• Fever

Precautions

• Use with caution in patients with known allergies to any component of the formulation
• Monitor for signs of hypersensitivity during administration
• Consider volume overload in patients with cardiac or renal impairment

Pregnancy

The safety of colloidal solutions during pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

It is not known whether colloidal solutions are excreted in human milk. Caution should be exercised when administering to breastfeeding mothers.

Storage

Store at room temperature, protect from light, and do not freeze. Keep out of reach of children.

Formulations

• Colloidal silver
• Colloidal gold
• Colloidal iron
• Other metal colloids

Indications

• Used as a disintegrant in tablet formulations
• Enhances the bioavailability of active pharmaceutical ingredients

Dosage

Children: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Adults: Refer to the specific formulation guidelines, as dosage will vary based on the active ingredient and formulation type.

Mechanism of action

Croscarmellose sodium works by swelling and absorbing water when it comes into contact with gastrointestinal fluids. This swelling leads to the rapid disintegration of the tablet or capsule matrix, facilitating the release and absorption of the active pharmaceutical ingredients.

Pharmacodynamics

Croscarmellose sodium is classified as a superdisintegrant. Its ability to rapidly disintegrate solid dosage forms can significantly enhance the dissolution rate of the active ingredient, which is crucial for achieving therapeutic effects in a timely manner.

Pharmacokinetics

Croscarmellose sodium is not absorbed in the gastrointestinal tract and does not exert pharmacological effects in the body. It is considered non-toxic and is excreted unchanged. Its main role is as an excipient, influencing the formulation's characteristics rather than the pharmacokinetics of the active ingredients.

Precautions

• Use with caution in patients with known hypersensitivity to croscarmellose or its components.

Pregnancy

Safety in pregnancy has not been established. Use only if clearly needed.

Breast-feeding

Caution is advised when using during breastfeeding, as safety has not been established.

Storage

Store in a cool, dry place, away from moisture and heat.

Formulations

• Powder
• Granules

Indications

• Ethylene glycol poisoning
• Metabolic acidosis due to glycolate accumulation

Dosage

Adults: Refer to the BNF for specific dosing guidance in cases of eth

Mechanism of action

Glycollate is produced during the metabolic breakdown of ethylene glycol. The toxicity associated with ethylene glycol arises from its conversion to glycolic acid, leading to an accumulation of glycolate and other metabolites. This metabolic pathway results in metabolic acidosis and potential renal damage due to the accumulation of toxic metabolites. The exact elimination kinetics of glycolate and the associated metabolites are not fully understood, but their presence in the body contributes to the toxicological profile observed during ethylene glycol poisoning.

Pharmacodynamics

The pharmacodynamics of glycollate involves its contribution to the toxic effects seen in ethylene glycol metabolism. Glycollate, along with glycolic acid, can lead to metabolic acidosis, affecting the body's acid-base balance. The compound induces diuresis, but this effect is transient, and the accumulation of glycolate can have deleterious effects on renal function and overall metabolic status. The clinical implications of glycollate toxicity necessitate prompt identification and treatment to mitigate its effects.

Pharmacokinetics

The pharmacokinetics of glycollate are characterized by its formation through the metabolism of ethylene glycol. After administration, ethylene glycol reaches peak plasma levels within 2 hours, while glycolate peaks between 4-6 hours. The elimination half-life of ethylene glycol is approximately 1.7 hours in rats and 3.4 hours in dogs. Renal excretion plays a significant role in the elimination of both ethylene glycol and glycolate, with approximately 20-30% and 5% of the dose excreted renally, respectively. The metabolic pathways for glycollate suggest a slower rate of elimination compared to ethylene glycol.

Dosage

Children: Dosage depends on specific hydrophobic drugs; refer to relevant pharmacology texts or prescribing information.

Adults: Dosage depends on specific hydrophobic drugs; refer to relevant pharmacology texts or prescribing information.

Mechanism of action

Hydrophobic interactions are fundamental in biochemistry and pharmacology, influencing how drugs interact with biological membranes and proteins. Drugs with hydrophobic properties can penetrate lipid membranes more readily, facilitating their absorption and distribution within the body. This property also aids in the binding of drugs to their target receptors, particularly in the case of hydrophobic drugs interacting with lipid-embedded receptors.

Pharmacodynamics

Hydrophobic drugs often exhibit a high affinity for lipid environments, which can enhance their therapeutic effects. Their actions can be influenced by their ability to partition into cell membranes, affecting the pharmacological response. The degree of hydrophobicity can impact the drug's potency, efficacy, and duration of action, as well as its potential for side effects due to interactions with cellular components.

Pharmacokinetics

The pharmacokinetics of hydrophobic drugs are characterized by their absorption, distribution, metabolism, and excretion (ADME). Hydrophobic drugs typically have a higher volume of distribution due to their affinity for tissues with high lipid content. They may be metabolized in the liver via cytochrome P450 enzymes, and their clearance can vary based on their hydrophobicity, influencing half-life and dosing regimens.

Pregnancy

Hydrophobic substances may affect drug absorption and distribution, which can vary in pregnant individuals. Consult specific drug guidelines for safety.

Breast-feeding

Hydrophobic compounds may have limited transfer into breast milk, but caution is advised. Consult specific drug guidelines for safety.

Storage

Store in a cool, dry place away from light. Specific storage conditions may vary by formulation.

Indications

• Anxiety disorders
• Nausea and vomiting
• Allergic conditions
• Preoperative sedation
• Pruritus

Dosage

Children: Refer to the BNF for Children for appropriate dosing recommendations based on age and weight.

Adults: Refer to the BNF for specific dosing guidelines based on the indication and patient characteristics.

Mechanism of action

Hydroxyzine works by antagonizing the H1 histamine receptors, leading to a reduction in the effects of histamine in the body. This action helps alleviate symptoms of allergic reactions and promotes sedation. Additionally, it may exert effects on serotonin and adrenergic receptors, which could contribute to its anxiolytic properties. Hydroxyzine is also involved in various metabolic pathways, including selenium metabolism and the degradation of reactive oxygen species.

Pharmacodynamics

The pharmacodynamic effects of hydroxyzine include sedation, anxiolysis, and reduction of allergic symptoms. Its sedative effects can make it useful in managing anxiety and inducing sleep, while its antihistaminic properties help to relieve symptoms such as itching and rashes associated with allergic reactions. The onset of action is typically within 15 to 30 minutes when taken orally, with peak effects occurring within 1 to 2 hours.

Pharmacokinetics

Hydroxyzine is well absorbed from the gastrointestinal tract, with peak plasma concentrations occurring approximately 2 hours after oral administration. It is extensively metabolized in the liver, with metabolites, including cetirizine, possessing their own therapeutic effects. Hydroxyzine has a half-life of approximately 20 hours, allowing for once or twice daily dosing. It is primarily excreted in the urine, with less than 1% of the unchanged drug found in urine.

Interactions

• hydroxyzine+antiepileptics: Severe (increases risk of overheating and dehydration)
• hydroxyzine+zonisamide: Severe (increases risk of overheating and dehydration)
• hydroxychloroquine+penicillamine: Severe (increases risk of haematological toxicity)
• hydroxychloroquine+agalsidase alfa: Unknown (decreases effects)
• hydroxychloroquine+agalsidase beta: Unknown (decreases exposure)
• hydroxychloroquine+oral cholera vaccine: Unknown (decreases efficacy)
• live vaccines+hydroxy carbamide: Unknown (increases risk of generalised infection (possibly life-threatening))
• lanthanum+hydroxychloroquine: Unknown (decreases absorption)
• macrolides+hydroxychloroquine: Unknown (increases risk of serious cardiovascular adverse effects)
• hydroxychloroquine+remdesivir: Unknown (decreases effects)

Pregnancy

Safety in pregnancy has not been established. Use only if the potential benefit justifies the potential risk to the fetus.

Breast-feeding

Use with caution. Hydroxychloroquine is excreted in breast milk, and effects on the infant are unknown.

Storage

Store in a cool, dry place, protected from light. Keep out of reach of children.

Formulations

• Tablets
• Oral solution

Indications

• Use as a preservative in pharmaceutical formulations
• Antimicrobial agent in cosmetic and food products
• Potential use in the management of inflammatory conditions due to salicylate biosynthesis

Dosage

Children: Refer to the BNF for Children for appropriate dosing information.

Adults: Refer to the specific product guidelines and BNF for appropriate dosing information.

Mechanism of action

Hydroxybenzoate functions primarily as a preservative by inhibiting the growth of microorganisms. It exerts its effects through the disruption of microbial cell metabolism, thereby preventing spoilage and degradation. The compound is involved in various biosynthetic pathways, including the production of salicylates, which possess anti-inflammatory properties.

Pharmacodynamics

Hydroxybenzoate displays antimicrobial activity against a range of bacteria and fungi. Its efficacy is influenced by factors such as pH and concentration, with higher concentrations generally leading to greater antimicrobial effects. The compound may also exhibit antioxidant properties, contributing to its protective effects in various formulations.

Pharmacokinetics

The pharmacokinetics of hydroxybenzoate involves its absorption, distribution, metabolism, and excretion. It is readily absorbed when applied topically or ingested. Once in the system, it is metabolized primarily in the liver, with metabolites excreted through the urine. The elimination half-life may vary based on the formulation and route of administration.

Pregnancy

There is limited information available regarding the safety of hydroxybenzoate during pregnancy. Consult a healthcare provider for advice.

Breast-feeding

It is unclear if hydroxybenzoate is excreted in human milk. Consult a healthcare provider before use.

Storage

Store in a cool, dry place, away from direct sunlight. Keep out of reach of children.

Indications

• Nutritional support
• Source of carbohydrates
• Dietary fiber source
• Animal feed

Dosage

Children: As with adults, there are no specific dosing recommendations for maize for children. It can be introduced into the diet in age-appropriate forms and quantities, keeping in mind the overall dietary balance.

Adults: There are no specific dosing recommendations for maize as it is typically consumed as part of a balanced diet. It can be included in daily meals in various forms such as whole kernels, flour, or as part of dishes.

Mechanism of action

Maize primarily acts as a source of energy due to its high carbohydrate content. The complex carbohydrates in maize are broken down into glucose, which is then utilized by the body for energy production. It also contributes to dietary fiber intake, which can aid in digestive health and regulation of blood sugar levels.

Pharmacodynamics

The consumption of maize influences blood glucose and insulin levels due to its carbohydrate content. It has a relatively low glycemic index when consumed in whole form, which can help in managing blood sugar levels. The dietary fiber present in maize can also promote satiety and aid in weight management.

Pharmacokinetics

The digestion of maize begins in the mouth with salivary amylase breaking down starches into simpler sugars. In the stomach and small intestine, enzymes further break down these carbohydrates. The resultant glucose is absorbed into the bloodstream, where it is transported to cells for energy production. The absorption rate can vary based on the form of maize consumed (e.g., whole kernels versus processed forms).

Pregnancy

Maize is generally considered safe for consumption during pregnancy as it is a staple food and provides essential nutrients.

Breast-feeding

Maize is safe to consume while breastfeeding and can provide important nutrients to both the mother and the infant.

Storage

Store in a cool, dry place, away from moisture and pests. Properly sealed containers can help prolong shelf life.

Formulations

• Whole maize grains
• Maize flour (cornmeal)
• Maize starch
• Maize oil

Indications

• Type 2 diabetes mellitus
• Polycystic ovary syndrome (PCOS)

Dosage

Children: The

Adults: The usual starting dose of metformin for adults is 500 mg taken orally twice a day or 850 mg once daily, with gradual increases based on tolerance and blood glucose levels. The maximum recommended daily dose is 2000-3000 mg, depending on the formulation used.

Mechanism of action

Metformin decreases blood glucose levels by decreasing hepatic glucose production (gluconeogenesis), decreasing intestinal absorption of glucose, and increasing insulin sensitivity, which enhances peripheral glucose uptake and utilization. It is known to inhibit mitochondrial complex I activity, leading to increased AMP:ATP ratios that activate AMP-activated protein kinase (AMPK), a key regulator of glucose metabolism. This activation results in reduced hepatic glucose output and improved cellular glucose uptake.

Pharmacodynamics

Metformin exerts its effects primarily by enhancing insulin sensitivity and reducing glucose production by the liver. Unlike sulfonylureas, which increase insulin secretion, metformin does not cause hyperinsulinemia. Its ability to lower fasting plasma glucose and glycosylated hemoglobin (HbA1c) levels makes it a cornerstone in the management of type 2 diabetes. Clinical studies have shown significant reductions in fasting plasma glucose and HbA1c levels in patients treated with metformin.

Pharmacokinetics

Metformin is absorbed from the gastrointestinal tract, with peak plasma concentrations typically occurring 2-3 hours after ingestion. It has a bioavailability of approximately 50-60% when administered orally. The drug is primarily eliminated unchanged by the kidneys, and its clearance is proportional to renal function. The half-life of metformin is about 6.5 hours. Accumulation may occur in cases of renal impairment, necessitating caution in patients with reduced renal function.

Adverse effects

• Gastrointestinal disturbances (nausea, vomiting, diarrhea)
• Lactic acidosis
• Vitamin B12 deficiency

Interactions

• dolutegravir+metformin: Moderate (increases exposure)
• cimetidine+metformin: Moderate (increases exposure)
• risdiplam+metformin: Moderate (increases concentration)
• vandetanib+metformin: Moderate (increases exposure)
• bictegravir+metformin: Unknown (increases exposure)
• guanfacine+metformin: Unknown (increases concentration)
• mexiletine+metformin: Unknown (affects exposure)
• pitolisant+metformin: Unknown (increases exposure)
• ribociclib+metformin: Unknown (increases exposure)

Precautions

• Renal impairment
• Dehydration
• Excessive alcohol intake

Pregnancy

Metformin is classified as a Category B medication. It is often used during pregnancy for managing gestational diabetes but should be administered under medical supervision.

Breast-feeding

Metformin is excreted in breast milk, but is generally considered safe for use during breastfeeding. Consult with a healthcare provider for specific guidance.

Storage

Store in a cool, dry place, away from direct light. Keep out of reach of children.

Formulations

• Tablets
• Extended-release tablets
• Oral solution

Indications

• Allergic conditions
• Autoimmune diseases
• Asthma and chronic obstructive pulmonary disease (COPD)
• Certain cancers (e.g., leukemia, lymphoma)
• Skin conditions (e.g., dermatitis)
• Inflammatory bowel disease
• Multiple sclerosis exacerbations
• Severe infections requiring immunosuppression

Dosage

Children: Refer to BNF for Children for specific dosing; doses vary significantly based on the child's age, weight, and condition being treated.

Adults: Refer to BNF for specific dosing; typically, initial doses range from 4 to 48 mg depending on the severity of the condition.

Mechanism of action

Methylprednisolone exerts its effects by binding to glucocorticoid receptors, leading to the modulation of gene expression. This interaction influences the transcription of anti-inflammatory proteins while suppressing the expression of pro-inflammatory genes, ultimately resulting in reduced inflammation and immune response.

Pharmacodynamics

The pharmacodynamic effects of methylprednisolone are characterized by its ability to decrease inflammation, suppress the immune response, and affect carbohydrate metabolism. Therapeutic doses lead to various systemic effects, including modification of leukocyte distribution and inhibition of cytokine production.

Pharmacokinetics

Methylprednisolone is well absorbed after oral administration, with a bioavailability of approximately 50%. It has a volume of distribution that reflects extensive tissue binding. The drug is metabolized primarily in the liver through conjugation and reduction, and its metabolites are excreted in urine. The half-life varies based on the route of administration but is generally around 18 to 36 hours.

Adverse effects

• Increased blood pressure
• Hyperglycemia
• Weight gain
• Mood changes
• Insomnia
• Gastrointestinal disturbances
• Increased susceptibility to infections

Interactions

• methylphenidate+apraclonidine: Severe (decreases effects)
• methylthioninium chloride+bupropion: Severe (increases risk of severe hypertension)
• methylphenidate+linezolid: Severe (increases risk of elevated blood pressure)
• rasagiline+methylphenidate: Severe (increases risk of a hypertensive crisis)
• mao-inhibitors+methylphenidate: Severe (increases risk of a hypertensive crisis)
• dronedarone+methylprednisolone: Moderate (increases exposure)
• miconazole+methylprednisolone: Moderate (increases concentration)
• antifungals, azoles+methylprednisolone: Moderate (increases exposure)
• crizotinib+methylprednisolone: Moderate (increases exposure)

Precautions

• Use with caution in patients with hypertension
• Monitor blood glucose levels in diabetic patients
• Consider potential for infection risk due to immunosuppression
• Evaluate for psychiatric effects in susceptible individuals

Pregnancy

Corticosteroids may be used during pregnancy if the potential benefit justifies the risk to the fetus. Careful monitoring is advised.

Breast-feeding

Corticosteroids are excreted in breast milk; caution is advised. Monitor the infant for potential effects.

Storage

Store in a cool, dry place, away from light. Keep out of reach of children.

Formulations

• Tablets
• Injectable solutions
• Topical preparations

Mechanism of action

Methylsulphate functions as a methylating agent, transferring a methyl group to nucleophiles. This process involves the formation of a sulfonium ion, which is highly reactive and can readily react with nucleophilic sites on various substrates, leading to methylation reactions.

Pharmacodynamics

The pharmacodynamics of methylsulphate is primarily related to its role as a methylating agent in biochemical reactions. It can alter the structure and function of biological molecules, potentially affecting cellular processes and signaling pathways. However, detailed pharmacodynamic studies specific to therapeutic use are limited.

Pharmacokinetics

There is limited information on the pharmacokinetics of methylsulphate, given its typical use as a reagent in laboratory settings rather than a clinical drug. When used in chemical reactions, its reactivity and transformation into other compounds would dictate its pharmacokinetic profile, which could vary significantly based on the specific context of use.

Pregnancy

There is limited data on the use of methylsulphate in pregnancy. Consult relevant guidelines.

Breast-feeding

Data on the excretion of methylsulphate in human milk is not available. Caution is advised.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Used as an excipient in tablet formulations
• Used as a bulking agent in capsule formulations
• Used in food products as a thickener or stabilizer

Dosage

Children: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Adults: Refer to specific product guidelines as dosage will depend on the formulation and the active ingredients.

Mechanism of action

Microcrystalline cellulose acts as a non-digestible filler that enhances the flow properties of powders during the manufacturing of tablets and capsules. It does not have a direct pharmacological action on the body but ensures that the active ingredients are effectively delivered to the patient.

Pharmacodynamics

As a non-active ingredient, microcrystalline cellulose does not exert pharmacodynamic effects typical of active pharmaceutical ingredients. Its primary role is to provide a stable and consistent matrix for the drug, facilitating the release of the active compound once ingested.

Pharmacokinetics

Microcrystalline cellulose is not absorbed in the gastrointestinal tract; it passes through the digestive system largely unchanged. It adds bulk to the stool, which may aid in promoting regular bowel movements. The substance is excreted in feces, where it contributes to dietary fiber intake.

Pregnancy

Data regarding the use of microcrystalline cellulose during pregnancy is limited. It is advisable to consult with healthcare professionals before use.

Breast-feeding

Microcrystalline cellulose is considered safe during breastfeeding, as it is not absorbed systemically.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Tablet coating
• Granule coating
• Improvement of drug stability
• Taste masking
• Aesthetic enhancement of pharmaceuticals

Dosage

Children: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Adults: Dosage will depend on the specific formulation and active ingredients of the medication being coated. Refer to the specific product information for guidance.

Mechanism of action

Opadry functions primarily as a coating polymer that adheres to the surface of tablets or granules, creating a protective layer. This layer can control the release of the active ingredient and protect it from environmental factors such as moisture and light. The specific composition of Opadry can vary, but it typically includes film-forming agents, plasticizers, and colorants that work together to achieve the desired coating characteristics.

Pharmacodynamics

The pharmacodynamics of Opadry is largely focused on its physical and chemical properties rather than specific biological interactions. The coating alters the dissolution characteristics of the drug, potentially leading to modified release profiles. This can enhance drug bioavailability or control the release rate of the active ingredient, thereby impacting the therapeutic effect.

Pharmacokinetics

As a coating agent, Opadry itself is not absorbed into the systemic circulation and does not have pharmacokinetic properties related to absorption, distribution, metabolism, or excretion of an active pharmaceutical ingredient. Its impact on pharmacokinetics is indirect, as it affects how the active drug is released and absorbed in the gastrointestinal tract.

Pregnancy

Opadry is a film-coating agent, and specific studies on its effects during pregnancy are not well-documented. Generally, it is advisable to use medications cautiously during pregnancy. Consult a healthcare provider for guidance.

Breast-feeding

Limited data are available regarding the safety of Opadry during breastfeeding. It is recommended to consult a healthcare provider before use.

Storage

Store in a cool, dry place away from direct sunlight and moisture. Keep out of reach of children.

Formulations

• Opadry OY - a coating system for oral solid dosage forms
• Opadry II - a polymer-based coating system for tablet and capsule applications

Indications

• Topical antiseptic for skin disinfection
• Surgical scrubs and hand sanitizers
• Wound care management
• Pharmaceutical excipient in solid and liquid formulations

Dosage

Children: Refer to specific product guidelines for pediatric dosing recommendations, as doses can vary based on formulation and intended use.

Adults: Refer to specific product guidelines for dosing recommendations, as doses can vary based on the formulation and intended use.

Mechanism of action

Povidone acts by forming a complex with iodine when used as an antiseptic, which releases iodine slowly to exert its antimicrobial effect. The iodine disrupts microbial cell walls and interferes with protein synthesis, leading to cell death. Additionally, as a polymer, povidone can enhance drug solubility and stability by forming a hydrophilic matrix.

Pharmacodynamics

Povidone has a broad spectrum of antimicrobial activity against bacteria, viruses, and fungi. Its antiseptic properties are primarily due to the release of iodine, which is effective in reducing microbial load and preventing infection. The polymer's ability to bind to various substances allows it to be utilized in formulations that require improved stability and solubility.

Pharmacokinetics

Povidone is not absorbed systemically when applied topically, as it remains localized at the site of application. Its pharmacokinetics are largely dependent on the formulation and route of administration, with the polymer being metabolized by hydrolysis and excreted in urine as low-molecular-weight compounds. The release and activity of iodine are influenced by the concentration of povidone and the presence of organic matter.

Adverse effects

• Local irritation
• Allergic reactions
• Skin rashes
• Hypersensitivity reactions

Precautions

• Use with caution in patients with known allergies to iodine or povidone-iodine
• Avoid use in deep puncture wounds or serious burns

Pregnancy

Povidone is generally considered safe for use during pregnancy, but it is advisable to consult a healthcare professional before use.

Breast-feeding

Povidone is considered safe during breastfeeding, but it is recommended to consult a healthcare professional.

Storage

Store at room temperature, away from moisture and heat. Keep the container tightly closed.

Formulations

• Topical solution
• Ointment
• Surgical scrub
• Gauze impregnated with povidone-iodine

Indications

• Hyperthyroidism
• Graves' disease
• Thyroid storm

Dosage

Children: Refer to the BNF

Adults: The usual initial dose of propylthiouracil in adults is 300 mg per day, divided into 3 doses. The maintenance dose is typically 100-150 mg per day, adjusted based on thyroid function tests.

Mechanism of action

Propylthiouracil acts by inhibiting the enzyme thyroid peroxidase, which is involved in the iodination of tyrosine residues in thyroglobulin, a precursor of thyroid hormones. By blocking this enzyme, PTU reduces the production of thyroxine (T4) and triiodothyronine (T3), leading to decreased thyroid hormone levels in circulation. Additionally, PTU inhibits the conversion of T4 to T3 in peripheral tissues, further contributing to its antithyroid effects.

Pharmacodynamics

The pharmacodynamic effects of propylthiouracil are primarily centered around its ability to lower thyroid hormone levels, which helps alleviate symptoms of hyperthyroidism such as increased heart rate, weight loss, and anxiety. The onset of action can vary, but therapeutic effects may be observed within several weeks of initiation. Monitoring thyroid function tests is essential to assess the efficacy and adjust dosing as needed.

Pharmacokinetics

Propylthiouracil is well absorbed from the gastrointestinal tract, though its bioavailability can be affected by factors such as food intake. The drug is extensively metabolized in the liver, and its elimination half-life averages around 1-2 hours. Most of the drug is excreted in urine as metabolites. It is important to note that due to its rapid metabolism, multiple daily doses may be required to maintain therapeutic levels.

Interactions

• propylthiouracil+metyrapone: Severe (decreases effects)

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Indications

• Silicosis
• Chronic obstructive pulmonary disease (COPD)
• Lung cancer associated with silica exposure

Dosage

Adults: Silica is not administered as a drug, but rather

Mechanism of action

Silica, particularly crystalline forms like quartz and cristobalite, can induce cytotoxicity and morphological transformation in cells. The cytotoxic effects are attributed to the presence of silanol groups and trace iron on the silica surface, which can generate reactive oxygen species. These interactions lead to cellular damage and transformation, suggesting multiple molecular mechanisms underlying silica's biological effects. The activity is sensitive to the silica's surface structure and composition, indicating that the biological response is a phenomenon originating from the silica's surface characteristics.

Pharmacodynamics

Silica's pharmacodynamic effects are largely related to its cytotoxic and transforming properties, particularly in lung tissue. The inhalation of crystalline silica can lead to the activation of inflammatory pathways, oxidative stress, and apoptosis in alveolar macrophages and epithelial cells. This can result in chronic inflammation, fibrosis, and ultimately, diseases such as silicosis and lung cancer. The degree of these effects varies based on the type of silica, its crystalline structure, and the presence of surface modifications.

Pharmacokinetics

The pharmacokinetics of silica is complex as it is not absorbed systemically when inhaled or ingested. Instead, inhaled silica particles can deposit in the alveolar region of the lungs, where they may persist for long periods. The body responds to silica exposure through inflammatory processes, and macrophages attempt to phagocytize silica particles. However, the persistence of these particles can lead to chronic lung conditions. Clearance mechanisms are inefficient, leading to prolonged retention in lung tissue.

Adverse effects

• Cytotoxicity
• Morphological transformation of cells
• Respiratory issues
• Silicosis
• Lung cancer

Precautions

• Use caution in occupational settings with silica dust exposure
• Regular monitoring of lung function in exposed individuals

Pregnancy

There is insufficient data on the effects of silica on pregnancy. It is advised to minimize exposure.

Breast-feeding

Limited data available; caution is advised due to potential respiratory effects.

Storage

Store in a cool, dry place, away from moisture and incompatible materials.

Formulations

• Crystalline silica
• Amorphous silica (diatomaceous earth)
• Silica gel

Indications

• Nutritional supplementation
• Energy source in enteral nutrition
• Excipient in pharmaceutical formulations

Dosage

Children: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Adults: Refer to specific guidelines or product inserts for dosing information, as it can vary based on the context of use.

Mechanism of action

Starch is broken down into glucose units by enzymes such as amylase during digestion. The glucose is then absorbed in the intestines and utilized for energy production in the body's cells. This pathway involves hydrolysis of the glycosidic bonds, converting starch into simpler sugars.

Pharmacodynamics

Starch primarily serves as an energy source. Its digestion and absorption lead to an increase in blood glucose levels, which provides energy for metabolic processes. In this context, it plays a crucial role in maintaining energy homeostasis in the body.

Pharmacokinetics

Starch is not absorbed in its polymeric form; it must first be enzymatically hydrolyzed into simpler sugars such as maltose and glucose. The digestion and absorption of starch occur predominantly in the small intestine, with glucose being readily absorbed into the bloodstream. The rate of absorption can vary depending on the type of starch and its physical form.

Adverse effects

• Allergic reactions
• Gastrointestinal discomfort
• Diarrhea
• Constipation

Precautions

• Use with caution in individuals with known allergies to starch or starch derivatives
• Monitor for gastrointestinal symptoms in patients with a history of digestive disorders

Pregnancy

Starch is generally considered safe for use during pregnancy. However, it should be consumed in moderation as part of a balanced diet.

Breast-feeding

Starch is deemed safe for nursing mothers when used in moderation as part of a balanced diet.

Storage

Store in a cool, dry place away from moisture and direct sunlight.

Formulations

• Powder
• Granules
• Tablets
• Suspensions

Indications

• Used as an excipient in drug formulations
• Pleurodesis for the management of recurrent pleural effusions

Dosage

Children: Refer to specific guidelines for paediatric use, as dosing may differ based on age and clinical condition.

Adults: Refer to specific guidelines for the appropriate dosage in pleurodesis and other applications, as it may vary based on clinical context.

Mechanism of action

Talc exhibits very good absorptive properties, allowing it to absorb moisture and other substances effectively. This characteristic is particularly useful in pharmaceutical formulations, where it may enhance the stability and texture of the drug product.

Pharmacodynamics

Talc's primary pharmacodynamic effect is its ability to act as an inert filler and bulking agent in pharmaceutical preparations. It does not have any intrinsic pharmacological activity but serves to improve the physical properties of formulations, such as flowability and compressibility.

Pharmacokinetics

Talc is not absorbed systemically when used as an excipient or in medical procedures. Its effects are local, and it remains in the site of application, where it functions primarily as a mechanical agent. The pharmacokinetics of talc in the context of its use in pleurodesis involves its ability to promote adhesion of the pleural surfaces, thereby preventing fluid accumulation.

Pregnancy

Talc is classified as a substance with minimal systemic absorption, but safety during pregnancy has not been well established. Consult relevant guidelines.

Breast-feeding

Talc is not expected to be absorbed in significant amounts; however, caution is advised and consult guidelines.

Storage

Store in a cool, dry place, away from direct sunlight.

Dosage

Children: Refer to the BNF for Children for appropriate paediatric dosing information.

Adults: Refer to the specific BNF guidelines for dosing information as it may vary based on the condition being treated.

Mechanism of action

The mechanism of action for White involves its interaction with specific biological pathways, leading to the desired pharmacological effects. The precise pathways may include modulation of receptor activity or alteration of enzyme function, although specific details are not provided.

Pharmacodynamics

Pharmacodynamics of White includes its effects on the body, including therapeutic effects and potential side effects. As a compound, it may exert its influence on multiple physiological systems, which can lead to changes in symptoms or disease progression.

Pharmacokinetics

Pharmacokinetics of White involves its absorption, distribution, metabolism, and excretion. Understanding these parameters can help predict how the drug behaves in the body, including onset of action and duration of effect. Detailed pharmacokinetic data is not specified.

Mechanism of action

Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Metformin has no significant effects on the secretion of glucagon, cortisol, growth hormone or somatostatin. Metformin reduces glucose levels primarily by decreasing hepatic glucose production and by increasing insulin action in muscle and fat. ... May decrease plasma glucose by reducing the absorption of glucose from the intestine. /Salt not specified/ Metformin potentiates the effect of insulin by mechanisms not fully understood. Metformin does not stimulate pancreatic beta cells to increase secretion of insulin; insulin secretion must be present for metformin to work properly. It is postulated that metformin decreases hepatic glucose production and improves insulin sensitivity by increasing peripheral glucose uptake and utilization. /Salt not specified/ People with Type 2 diabetes mellitus (T2DM) have reduced bone mineral density and an increased risk of fractures due to altered mesenchymal stem cell (MSC) differentiation in the bone marrow. This leads to a shift in the balance of differentiation away from bone formation (osteogenesis) in favour of fat cell development (adipogenesis). The commonly used anti-diabetic drug, metformin, activates the osteogenic transcription factor Runt-related transcription factor 2 (Runx2), which may suppress adipogenesis, leading to improved bone health. Here we investigate the involvement of the metabolic enzyme, AMP-activated protein kinase (AMPK), in these protective actions of metformin. The anti-adipogenic actions of metformin were observed in multipotent C3H10T1/2 MSCs, in which metformin exerted reciprocal control over the activities of Runx2 and the adipogenic transcription factor, PPARgamma, leading to suppression of adipogenesis. These effects appeared to be independent of AMPK activation but rather through the suppression of the mTOR/p70S6K signalling pathway. Basal AMPK and mTOR/p70S6K activity did appear to be required for adipogenesis, as demonstrated by the use of the AMPK inhibitor, compound C. This observation was further supported by using AMPK knockout mouse embryo fibroblasts (MEFs) where adipogenesis, as assessed by reduced lipid accumulation and expression of the adipogeneic transcription factor, C/EBPbeta, was found to display an absolute requirement for AMPK. Further activation of AMPK in wild type MEFS, with either metformin or the AMPK-specific activator, A769662, was also associated with suppression of adipogenesis. It appears, therefore, that basal AMPK activity is required for adipogenesis and that metformin can inhibit adipogenesis through AMPK-dependent or -independent mechanisms, depending on the cellular context.

Mechanism of action

Ethylene glycol toxicity results from its metabolism to glycolic acid and other toxic metabolites. The accumulation of glycolate and the elimination kinetics of ethylene glycol and its metabolites are not well understood, so studies with male Sprague-Dawley rats and mixed breed dogs have been carried out. Ethylene glycol was administered by gavage to rats and dogs which were placed in metabolic cages for urine and blood sample collection at timed intervals. The peak plasma level of ethylene glycol occurred at 2 hr after dosing and that of glycolate between 4-6 hr. The rate of ethylene glycol elimination was somewhat faster in rats with a half-life of 1.7 hr compared to 3.4 hr in dogs. The maximum plasma level of glycolate was greater in rats although the pattern of accumulation was similar to that in dogs. Glycolate disappeared from the plasma at the same time as ethylene glycol, suggesting a slower rate of elimination of the metabolite than that of ethylene glycol. Renal excretion of ethylene glycol was an important route for its elimination accounting for 20-30% of the dose. Renal excretion of glycolate represented about 5% of the dose. Ethylene glycol induced an immediate, but short lived diuresis compared to that in control rats. Minimal clinical effects (mild acidosis with no sedation) were noted at these doses of ethylene glycol (1-2 g/kg) in both rats and dogs. The results indicate that the toxicokinetics of ethylene glycol and glycolate were similar in both species. The effect of 0.35 to 0.8 mmol/kg glycolic acid and 1.0 to 4.4 mmol/kg sodium glycolate on cyclopropane-epinephrine induced cardiac arrhythmias was examined using dogs. Doses of 0.35 to 0.5 mmol/kg glycolic acid increased the duration of arrhythmias in the 13 dogs tested, whereas doses >0.5 mmol/kg decreased or totally eliminated the arrhythmias in each of 11 dogs. Depression was observed for many of the dogs at higher doses. Sodium glycolate was much less effective in decreasing the arrhythmias, with 3 mmol/kg being required and its action being transient.

Mechanism of action

Metformin's mechanisms of action are unique from other classes of oral antihyperglycemic drugs. Metformin decreases blood glucose levels by decreasing hepatic glucose production (also called gluconeogenesis), decreasing the intestinal absorption of glucose, and increasing insulin sensitivity by increasing peripheral glucose uptake and utilization. It is well established that metformin inhibits mitochondrial complex I activity, and it has since been generally postulated that its potent antidiabetic effects occur through this mechanism. The above processes lead to a decrease in blood glucose, managing type II diabetes and exerting positive effects on glycemic control. After ingestion, the organic cation transporter-1 (OCT1) is responsible for the uptake of metformin into hepatocytes (liver cells). As this drug is positively charged, it accumulates in cells and in the mitochondria because of the membrane potentials across the plasma membrane as well as the mitochondrial inner membrane. Metformin inhibits mitochondrial complex I, preventing the production of mitochondrial ATP leading to increased cytoplasmic ADP:ATP and AMP:ATP ratios. These changes activate AMP-activated protein kinase (AMPK), an enzyme that plays an important role in the regulation of glucose metabolism. Aside from this mechanism, AMPK can be activated by a lysosomal mechanism involving other activators. Following this process, increases in AMP:ATP ratio also inhibit _fructose-1,6-bisphosphatase_ enzyme, resulting in the inhibition of gluconeogenesis, while also inhibiting _adenylate cyclase_ and decreasing the production of cyclic adenosine monophosphate (cAMP), a derivative of ATP used for cell signaling. Activated AMPK phosphorylates two isoforms of acetyl-CoA carboxylase enzyme, thereby inhibiting fat synthesis and leading to fat oxidation, reducing hepatic lipid stores and increasing liver sensitivity to insulin. In the intestines, metformin increases anaerobic glucose metabolism in enterocytes (intestinal cells), leading to reduced net glucose uptake and increased delivery of lactate to the liver. Recent studies have also implicated the gut as a primary site of action of metformin and suggest that the liver may not be as important for metformin action in patients with type 2 diabetes. Some of the ways metformin may play a role on the intestines is by promoting the metabolism of glucose by increasing glucagon-like peptide I (GLP-1) as well as increasing gut utilization of glucose. In addition to the above pathway, the mechanism of action of metformin may be explained by other ways, and its exact mechanism of action has been under extensive study in recent years. Metformin is widely used to treat hyperglycemia. However, metformin treatment may induce intrahepatic cholestasis and liver injury in a few patients with type II diabetes through an unknown mechanism. Here we show that metformin decreases SIRT1 protein levels in primary hepatocytes and liver. Both metformin-treated wild-type C57 mice and hepatic SIRT1-mutant mice had increased hepatic and serum bile acid levels. However, metformin failed to change systemic bile acid levels in hepatic SIRT1-mutant mice. Molecular mechanism study indicates that SIRT1 directly interacts with and deacetylates Foxa2 to inhibit its transcriptional activity on expression of genes involved in bile acids synthesis and transport. Hepatic SIRT1 mutation elevates Foxa2 acetylation levels, which promotes Foxa2 binding to and activating genes involved in bile acids metabolism, impairing hepatic and systemic bile acid homeostasis. Our data clearly suggest that hepatic SIRT1 mediates metformin effects on systemic bile acid metabolism and modulation of SIRT1 activity in liver may be an attractive approach for treatment of bile acid-related diseases such as cholestasis. Metformin is antihyperglycemic, not hypoglycemic. It does not cause insulin release from the pancreas and does not cause hypoglycemia, even in large doses. Me

Pharmacodynamics

**General effects** Insulin is an important hormone that regulates blood glucose levels. Type II diabetes is characterized by a decrease in sensitivity to insulin, resulting in elevations in blood glucose when the pancreas can no longer compensate. In patients diagnosed with type 2 diabetes, insulin is unable to exert adequate effects on tissues and cells (i.e. insulin resistance) and insulin deficiency may also be present. Metformin reduces hepatic production of glucose, decreases the intestinal absorption of glucose, and enhances insulin sensitivity by increasing both peripheral glucose uptake and utilization. In contrast with drugs of the sulfonylurea class, which lead to hyperinsulinemia, the secretion of insulin is unchanged with metformin use. **Effect on fasting plasma glucose (FPG) and Glycosylated hemoglobin (HbA1c)** HbA1c is an important periodic measure of glycemic control used to monitor diabetic patients. Fasting plasma glucose is also a useful and important measure of glycemic control. In a 29-week clinical trial of subjects diagnosed with type II diabetes, metformin decreased the fasting plasma glucose levels by an average of 59 mg/dL from baseline, compared to an average increase of 6.3 mg/dL from baseline in subjects taking a placebo. Glycosylated hemoglobin (HbA1c) was decreased by about 1.4% in subjects receiving metformin, and increased by 0.4% in subjects receiving placebo only.

Mechanism of action

...Some quartz and cristobalite dusts (crystalline) as well as the diatomaceous earths (amorphous), but not the pyrogenic amorphous silica, were cytotoxic and induced morphological transformation of SHE cells in a concentration-dependent manner. The ranking in cytotoxicity was different from that in transforming potency, suggesting two separate molecular mechanisms for the two effects. The cytotoxic and transforming potencies were different from one dust to another, even among the same structural silicas. The type of crystalline structure (quartz vs cristobalite) and the crystalline vs biogenic amorphous form did not correlate with cytotoxic or transforming potency of silica dusts. Comparison of cellular effects induced by original and surface modified samples revealed that several surface functionalities modulate cytotoxic and transforming potencies. The cytotoxic effects appeared to be related to the distribution and abundance of silanol groups and to the presence of trace amounts of iron on the silica surface. Silica particles with fractured surfaces and/or iron-active sites, able to generate reactive oxygen species, induced SHE cell transformation. The results show that the activity of silica at the cellular level is sensitive to the composition and structure of surface functionalities and confirm that the biological response to silica is a surface originated phenomenon. In vivo exposure of rat lungs to crystalline silica either by intratracheal instillation or by inhalation results in an increase in mRNA levels for inducible nitric oxide synthase (iNOS) in bronchoalveolar lavage cells (BALC), elevated nitric oxide (.NO) production by BALC, and an increase in .NO-dependent chemiluminescence (CL) from alveolar macrophages (AM). Induction of iNOS message occurs in both AM and polymorphonuclear leukocytes (PMN) harvested from silica-exposed lungs but is not significantly elevated in lavaged lung tissue. This review presents characteristics of simple and complicated coal workers' pneumoconiosis (CWP) as well as pathologic indices of acute and chronic silicosis by summarizing results of in vitro, animal, and human investigations. These results support four basic mechanisms in the etiology of CWP and silicosis: a) direct cytotoxicity of coal dust or silica, resulting in lung cell damage, release of lipases and proteases, and eventual lung scarring; b) activation of oxidant production by pulmonary phagocytes, which overwhelms the antioxidant defenses and leads to lipid peroxidation, protein nitrosation, cell injury, and lung scarring; c) activation of mediator release from alveolar macrophages and epithelial cells, which leads to recruitment of polymorphonuclear leukocytes and macrophages, resulting in the production of proinflammatory cytokines and reactive species and in further lung injury and scarring; d) secretion of growth factors from alveolar macrophages and epithelial cells, stimulating fibroblast proliferation and eventual scarring. Results of in vitro and animal studies provide a basis for proposing these mechanisms for the initiation and progression of pneumoconiosis. Data obtained from exposed workers lend support to these mechanisms. /The authors/ reported previously that freshly fractured silica (FFSi) induces activator protein-1 (AP-1) activation through extracellular signal-regulated protein kinases (ERKs) and p38 kinase pathways. In the present study, the biologic activities of FFSi and aged silica (ASi) were compared by measuring their effects on the AP-1 activation and phosphorylation of ERKs and p38 kinase. The roles of reactive oxygen species (ROS) in this silica-induced AP-1 activation were also investigated. FFSi-induced AP-1 activation was four times higher than that of ASi in JB6 cells. FFSi also caused greater phosphorylation of ERKs and p38 kinase than ASi. FFSi generated more ROS than ASi when incubated with the cells as measured by electron spin resonance (ESR). Studies using ROS-sensitive dyes and

Mechanism of action

It has very good absorptive properties.