Resmed Chlorhexidine Gluconate 0,2% Mouthwash

Indications

• Oral hygiene
• Skin antisepsis
• Bladder irrigation
• Urological surgery
• Management of infections associated with indwelling urinary catheters

Mechanism of action

Chlorhexidine's antimicrobial effects arise from its ability to disrupt microbial cell membranes. The positively charged chlorhexidine molecule interacts with negatively charged phosphate groups on microbial surfaces, compromising cell integrity and causing leakage of intracellular materials. This interaction allows chlorhexidine to enter the cell, precipitate cytoplasmic components, and ultimately induce cell death. At lower concentrations, chlorhexidine acts as a bacteriostatic agent, causing leakage of substances like potassium and phosphorus, while at higher concentrations, it exerts bactericidal effects.

Pharmacodynamics

Chlorhexidine exhibits broad-spectrum antimicrobial activity, effective against a variety of bacteria, yeasts, and viruses. Its action is dose-dependent, with lower concentrations (0.02%-0.06%) providing bacteriostatic effects, while higher concentrations (>0.12%) are bactericidal. Pharmacokinetic studies indicate that about 30% of chlorhexidine remains in the mouth after rinsing, allowing for slow release into oral fluids. This property, known as 'substantivity', helps prevent microbial colonization on surfaces like dentine, although prolonged use can lead to staining of oral surfaces.

Pharmacokinetics

Chlorhexidine is retained in the oral cavity at approximately 30% following rinsing, with a slow release into saliva. The pharmacokinetics of chlorhexidine indicate a high affinity for binding to tissues, which prolongs its antimicrobial action. The systemic absorption of chlorhexidine is minimal when used topically or as a rinse, making it safe for localized use. The elimination half-life and metabolism details are not well documented due to its primarily topical application.

Adverse effects

• Mucosal irritation
• Burning sensation
• Staining of teeth and oral surfaces
• Allergic reactions

Precautions

• Use with caution in patients with a history of hypersensitivity to chlorhexidine
• May cause irritation; discontinue if severe irritation occurs
• Staining may occur with prolonged use, particularly with oral formulations

Pregnancy

Chlorhexidine is generally considered safe for use during pregnancy; however, caution is advised and pregnant individuals should consult healthcare providers.

Breast-feeding

Chlorhexidine is considered safe during breastfeeding, but it is advisable to consult a healthcare provider.

Storage

Store at room temperature, away from light and moisture. Keep out of reach of children.

Formulations

• Irrigation solution (0.02% and 0.05%)
• Capsules (various strengths)
• Catheter maintenance solution (1:5000)
• Topical solutions for oral hygiene

Indications

• Use as a preservative in pharmaceutical formulations
• Antimicrobial agent in cosmetic and food products
• Potential use in the management of inflammatory conditions due to salicylate biosynthesis

Dosage

Children: Refer to the BNF for Children for appropriate dosing information.

Adults: Refer to the specific product guidelines and BNF for appropriate dosing information.

Mechanism of action

Hydroxybenzoate functions primarily as a preservative by inhibiting the growth of microorganisms. It exerts its effects through the disruption of microbial cell metabolism, thereby preventing spoilage and degradation. The compound is involved in various biosynthetic pathways, including the production of salicylates, which possess anti-inflammatory properties.

Pharmacodynamics

Hydroxybenzoate displays antimicrobial activity against a range of bacteria and fungi. Its efficacy is influenced by factors such as pH and concentration, with higher concentrations generally leading to greater antimicrobial effects. The compound may also exhibit antioxidant properties, contributing to its protective effects in various formulations.

Pharmacokinetics

The pharmacokinetics of hydroxybenzoate involves its absorption, distribution, metabolism, and excretion. It is readily absorbed when applied topically or ingested. Once in the system, it is metabolized primarily in the liver, with metabolites excreted through the urine. The elimination half-life may vary based on the formulation and route of administration.

Pregnancy

There is limited information available regarding the safety of hydroxybenzoate during pregnancy. Consult a healthcare provider for advice.

Breast-feeding

It is unclear if hydroxybenzoate is excreted in human milk. Consult a healthcare provider before use.

Storage

Store in a cool, dry place, away from direct sunlight. Keep out of reach of children.

Indications

• Allergic conditions
• Autoimmune diseases
• Asthma and chronic obstructive pulmonary disease (COPD)
• Certain cancers (e.g., leukemia, lymphoma)
• Skin conditions (e.g., dermatitis)
• Inflammatory bowel disease
• Multiple sclerosis exacerbations
• Severe infections requiring immunosuppression

Dosage

Children: Refer to BNF for Children for specific dosing; doses vary significantly based on the child's age, weight, and condition being treated.

Adults: Refer to BNF for specific dosing; typically, initial doses range from 4 to 48 mg depending on the severity of the condition.

Mechanism of action

Methylprednisolone exerts its effects by binding to glucocorticoid receptors, leading to the modulation of gene expression. This interaction influences the transcription of anti-inflammatory proteins while suppressing the expression of pro-inflammatory genes, ultimately resulting in reduced inflammation and immune response.

Pharmacodynamics

The pharmacodynamic effects of methylprednisolone are characterized by its ability to decrease inflammation, suppress the immune response, and affect carbohydrate metabolism. Therapeutic doses lead to various systemic effects, including modification of leukocyte distribution and inhibition of cytokine production.

Pharmacokinetics

Methylprednisolone is well absorbed after oral administration, with a bioavailability of approximately 50%. It has a volume of distribution that reflects extensive tissue binding. The drug is metabolized primarily in the liver through conjugation and reduction, and its metabolites are excreted in urine. The half-life varies based on the route of administration but is generally around 18 to 36 hours.

Adverse effects

• Increased blood pressure
• Hyperglycemia
• Weight gain
• Mood changes
• Insomnia
• Gastrointestinal disturbances
• Increased susceptibility to infections

Interactions

• methylphenidate+apraclonidine: Severe (decreases effects)
• methylthioninium chloride+bupropion: Severe (increases risk of severe hypertension)
• methylphenidate+linezolid: Severe (increases risk of elevated blood pressure)
• rasagiline+methylphenidate: Severe (increases risk of a hypertensive crisis)
• mao-inhibitors+methylphenidate: Severe (increases risk of a hypertensive crisis)
• dronedarone+methylprednisolone: Moderate (increases exposure)
• miconazole+methylprednisolone: Moderate (increases concentration)
• antifungals, azoles+methylprednisolone: Moderate (increases exposure)
• crizotinib+methylprednisolone: Moderate (increases exposure)

Precautions

• Use with caution in patients with hypertension
• Monitor blood glucose levels in diabetic patients
• Consider potential for infection risk due to immunosuppression
• Evaluate for psychiatric effects in susceptible individuals

Pregnancy

Corticosteroids may be used during pregnancy if the potential benefit justifies the risk to the fetus. Careful monitoring is advised.

Breast-feeding

Corticosteroids are excreted in breast milk; caution is advised. Monitor the infant for potential effects.

Storage

Store in a cool, dry place, away from light. Keep out of reach of children.

Formulations

• Tablets
• Injectable solutions
• Topical preparations

Mechanism of action

Methylsulphate functions as a methylating agent, transferring a methyl group to nucleophiles. This process involves the formation of a sulfonium ion, which is highly reactive and can readily react with nucleophilic sites on various substrates, leading to methylation reactions.

Pharmacodynamics

The pharmacodynamics of methylsulphate is primarily related to its role as a methylating agent in biochemical reactions. It can alter the structure and function of biological molecules, potentially affecting cellular processes and signaling pathways. However, detailed pharmacodynamic studies specific to therapeutic use are limited.

Pharmacokinetics

There is limited information on the pharmacokinetics of methylsulphate, given its typical use as a reagent in laboratory settings rather than a clinical drug. When used in chemical reactions, its reactivity and transformation into other compounds would dictate its pharmacokinetic profile, which could vary significantly based on the specific context of use.

Pregnancy

There is limited data on the use of methylsulphate in pregnancy. Consult relevant guidelines.

Breast-feeding

Data on the excretion of methylsulphate in human milk is not available. Caution is advised.

Storage

Store in a cool, dry place, away from direct sunlight.

Indications

• Hyperthyroidism
• Graves' disease
• Thyroid storm

Dosage

Children: Refer to the BNF

Adults: The usual initial dose of propylthiouracil in adults is 300 mg per day, divided into 3 doses. The maintenance dose is typically 100-150 mg per day, adjusted based on thyroid function tests.

Mechanism of action

Propylthiouracil acts by inhibiting the enzyme thyroid peroxidase, which is involved in the iodination of tyrosine residues in thyroglobulin, a precursor of thyroid hormones. By blocking this enzyme, PTU reduces the production of thyroxine (T4) and triiodothyronine (T3), leading to decreased thyroid hormone levels in circulation. Additionally, PTU inhibits the conversion of T4 to T3 in peripheral tissues, further contributing to its antithyroid effects.

Pharmacodynamics

The pharmacodynamic effects of propylthiouracil are primarily centered around its ability to lower thyroid hormone levels, which helps alleviate symptoms of hyperthyroidism such as increased heart rate, weight loss, and anxiety. The onset of action can vary, but therapeutic effects may be observed within several weeks of initiation. Monitoring thyroid function tests is essential to assess the efficacy and adjust dosing as needed.

Pharmacokinetics

Propylthiouracil is well absorbed from the gastrointestinal tract, though its bioavailability can be affected by factors such as food intake. The drug is extensively metabolized in the liver, and its elimination half-life averages around 1-2 hours. Most of the drug is excreted in urine as metabolites. It is important to note that due to its rapid metabolism, multiple daily doses may be required to maintain therapeutic levels.

Interactions

• propylthiouracil+metyrapone: Severe (decreases effects)

Mechanism of action

Chlorhexidine’s broad-spectrum antimicrobial effects are due to its ability to disrupt microbial cell membranes. The positively charged chlorhexidine molecule reacts with negatively charged phosphate groups on microbial cell surfaces - this reaction both destroys the integrity of the cell, allowing leakage of intracellular material, and allows chlorhexidine to enter the cell, causing precipitation of cytoplasmic components and ultimately cell death. The specific means of cell death is dependent on the concentration of chlorhexidine - lower concentrations are bacteriostatic and result in leakage of intracellular substances such as potassium and phosphorous, whereas higher concentrations are bactericidal and cause cytoplasmic precipitation.

Pharmacodynamics

Chlorhexidine is a broad-spectrum antimicrobial with demonstrated activity against both gram-positive and gram-negative bacteria, yeasts, and viruses. Antimicrobial activity is dose-dependent - chlorhexidine is bacteriostatic at lower concentrations (0.02%-0.06%) and bactericidal at higher concentrations (>0.12%). Pharmacokinetic studies of oral chlorhexidine rinses indicate that approximately 30% of the active ingredient is retained in the mouth following rinsing, which is subsequently slowly released into oral fluids. This ability to adsorb to dentine, shared with tetracycline antibiotics such as [doxycycline], is known as "substantivity" and is the result of chlorhexidine's positive charge - it is likely that this substantivity plays at least some role in chlorhexidine's antimicrobial activity, as its persistence on surfaces such as dentine prevent microbial colonization. Dental chlorhexidine rinses may result in staining of oral surfaces, such as teeth. This effect is not ubiquitous and appears to be more significant with extended therapy (i.e. up to 6 months) - nevertheless, patients for whom oral staining is unacceptable should use chlorhexidine rinse with caution and for the shortest effective interval. Allergic reactions to chlorhexidine have been associated with the development of anaphylaxis.