KETOVATE CREAM

Indications

• Endogenous Cushing's syndrome
• Cushing's disease
• Topical treatment of fungal infections (limited to specific formulations)

Dosage

Children: For paediatric dosing, refer to the BNF for Children

Adults: For Cushing's syndrome, the maximum dose is 200 mg daily with concurrent use of cobicistat-boosted regimens. The dosing should be adjusted based on patient response and liver enzyme levels.

Mechanism of action

Ketoconazole interacts with 14-alpha-sterol demethylase, a cytochrome P-450 enzyme essential for converting lanosterol to ergosterol. This inhibition results in reduced ergosterol levels in the fungal cell membrane, compromising its integrity and function. The metabolic blockage also leads to the accumulation of toxic sterol precursors, which further disrupt cellular processes. Ketoconazole's fungistatic properties prevent the growth and spread of fungal cells by altering cellular membranes and increasing membrane permeability.

Pharmacodynamics

As a fungistatic agent, ketoconazole halts growth in fungal cells, preventing their proliferation. It primarily targets the ergosterol biosynthesis pathway, which is crucial for maintaining fungal cell membrane integrity. This mechanism leads to increased membrane fluidity, impairing membrane-bound enzyme systems and resulting in growth inhibition of fungal pathogens.

Pharmacokinetics

Ketoconazole is well absorbed when taken orally, but its absorption can be affected by gastric pH. It undergoes extensive hepatic metabolism, primarily via cytochrome P450 enzymes, leading to various metabolites. The drug has a half-life of approximately 2-8 hours, but this can vary based on dose and individual metabolism. Ketoconazole is excreted mainly through the feces, with some renal excretion of unchanged drug.

Contra-indications

• Acquired QTc prolongation
• Acute porphyrias
• Congenital QTc prolongation
• Cushing's syndrome

Adverse effects

• Dizziness
• Flushing
• Hyperglycaemia
• Diarrhoea
• Gastrointestinal discomfort
• Nausea
• Vomiting
• Skin reactions
• Allergic conditions
• Alopecia
• Angioedema
• Asthenia
• Drowsiness
• Headache
• Thrombocytopenia
• Fever
• Hepatic disorders
• Taste alteration
• Appetite abnormality
• Arthralgia
• Dry mouth
• Epistaxis
• Flatulence
• Fontanelle bulging
• Gynaecomastia
• Hot flush
• Insomnia
• Increased intracranial pressure
• Malaise
• Myalgia
• Nervousness
• Papilloedema
• Paraesthesia
• Peripheral oedema
• Photophobia
• Photosensitivity reaction
• Tongue discolouration

Interactions

• Severe: phenobarbital decreases ketoconazole concentration
• Severe: primidone decreases ketoconazole concentration
• Severe: rifamycins increase ketoconazole concentration
• Severe: rifabutin increases ketoconazole concentration
• Severe: nevirapine decreases ketoconazole exposure
• Severe: rifampicin decreases ketoconazole exposure
• Moderate: anti-androgens increase ketoconazole exposure
• Moderate: darolutamide increases ketoconazole exposure
• Moderate: coumarins increase anticoagulant effect
• Moderate: warfarin increases anticoagulant effect

Precautions

• High dosage may cause proximal myopathy
• Avoid in chronic therapy
• Pre-treatment liver enzymes should not exceed 2 times the normal upper limit
• Risk of adrenal insufficiency

Pregnancy

Manufacturer advises avoid-teratogenic in animal

Indications

• Skin disinfection
• Preparation of skin before injections
• Cleansing minor wounds

Dosage

Children: Apply to the skin as required; consult product literature for specific guidance.

Adults: Apply to the skin as required for disinfection.

Mechanism of action

Alcohol exerts its antiseptic effect by denaturing proteins, disrupting cell membranes, and dehydrating microbial cells, leading to cell lysis and death.

Pharmacodynamics

Alcohol has broad-spectrum antimicrobial activity, effective against bacteria, fungi, and viruses. Its efficacy is influenced by concentration, with higher concentrations generally being more effective.

Pharmacokinetics

Alcohol is rapidly absorbed through the skin and mucous membranes. It is metabolized primarily in the liver, with a half-life that varies based on the individual's metabolic rate and the amount consumed.

Contra-indications

• Concomitant use with lithium
• Regular use in neonates
• Patients with severe burns when diathermy has been preceded by application of alcoholic skin disinfectants

Adverse effects

• Eye erythema
• Punctate keratitis
• Cytotoxicity
• Eye discolouration

Interactions

• Increases risk of visual disturbances with antiepileptics
• Increases concentration with methylphenidate
• Increases risk of facial flushing and skin irritation with topical pimecrolimus
• Increases concentration with retinoids
• Increases concentration with acitretin
• Increases risk of facial flushing and skin irritation with topical tacrolimus
• Decreases antidiuretic effect with vasopressin

Precautions

• Avoid regular application to inflamed or broken skin or mucosa
• Avoid broken skin
• Flammable

Pregnancy

Sufficient iodine may be absorbed to affect the fetal thyroid in the second and third trimester.

Breast-feeding

Avoid regular or excessive use.

Storage

Store in a cool, dry place away from heat and direct sunlight.

Formulations

• Betadine 2.5% dry powder spray
• Industrial methylated spirit
• Povidone-Iodine 25 mg per 1 gram

Indications

• Bacterial infections
• Pneumonia
• Meningitis
• Syphilis
• Endocarditis
• Skin and soft tissue infections

Dosage

Children: Paediatric dosing for benzylpenicillin is determined by the child's weight and the severity of the infection. Refer to the BNF for Children for specific dosing guidelines.

Adults: The usual adult dose for benzylpenicillin varies based on the type and severity of the infection. It is generally administered via intramuscular or intravenous routes. For severe infections, doses may range from 1 to 4 million units every 4 to 6 hours.

Mechanism of action

Benzylpenicillin exerts its antibacterial effects by inhibiting the synthesis of bacterial cell walls. It binds to penicillin-binding proteins (PBPs) located inside the bacterial cell wall, disrupting the transpeptidation process, which is crucial for cross-linking peptidoglycan layers. This inhibition leads to cell lysis and death of the bacteria.

Pharmacodynamics

Benzylpenicillin demonstrates time-dependent bactericidal activity, meaning its effectiveness is related to the duration of time the drug concentration remains above the minimum inhibitory concentration (MIC) for the target bacteria. It has a narrow spectrum of activity, primarily targeting Gram-positive cocci and some Gram-negative rods.

Pharmacokinetics

Benzylpenicillin is typically administered parenterally due to poor oral absorption. It is rapidly distributed throughout the body and can penetrate various tissues, including the central nervous system during inflammation. The drug is primarily eliminated by renal excretion, with a half-life of approximately 30 minutes to 1 hour in healthy individuals. Dosage adjustments may be necessary in patients with renal impairment.

Interactions

• leflunomide+benzylpenicillin: Unknown (increases exposure)
• nitisinone+benzylpenicillin: Unknown (increases exposure)
• teriflunomide+benzylpenicillin: Unknown (increases exposure)

Pregnancy

Benzylpenicillin is generally considered safe to use during pregnancy, as it is a penicillin antibiotic and has a long history of use.

Breast-feeding

Benzylpenicillin is excreted in breast milk in small amounts, but it is not expected to have adverse effects on a nursing infant.

Storage

Store in a cool, dry place, protected from light. Reconstituted solutions should be used promptly or stored in a refrigerator and used within a limited time frame.

Formulations

• Benzylpenicillin injection

Indications

• Dry skin conditions
• Atopic dermatitis
• Psoriasis
• Eczema
• Skin hydration enhancement

Dosage

Children: Refer to the BNF for Children for specific dosing recommendations based on age and condition.

Adults: Refer to the specific product monograph, as dosing may vary based on formulation and condition being treated.

Mechanism of action

Cetomacrogol acts as a surfactant, reducing the surface tension between different substances. This property facilitates the formation of emulsions and enhances the solubility of hydrophobic substances in aqueous solutions. By providing a barrier on the skin, it helps to prevent transepidermal water loss, thereby maintaining skin hydration.

Pharmacodynamics

The pharmacodynamic properties of cetomacrogol are characterized by its ability to improve the consistency and stability of emulsions, allowing for better delivery of topical agents. Its moisturizing effects help to alleviate symptoms associated with dry skin conditions, such as scaling, itching, and cracking.

Pharmacokinetics

Cetomacrogol is not systemically absorbed when applied topically, as it primarily acts at the site of application. Its pharmacokinetic profile is characterized by local action with minimal risk of systemic effects. Due to its emulsifying properties, it enhances the penetration of active ingredients in topical formulations without significant metabolic transformation.

Pregnancy

There are no known adverse effects in pregnancy. However, it is advisable to use only when clearly needed.

Breast-feeding

Cetomacrogol is generally considered safe to use during breastfeeding, but consult a healthcare professional before use.

Storage

Store in a cool, dry place, away from direct light.

Formulations

• Cream
• Ointment
• Emulsion

Indications

• Dry skin
• Eczema
• Psoriasis
• Skin irritation
• Cosmetic formulations

Dosage

Children: Refer to specific product formulations and guidelines, as doses may vary based on the formulation type and intended use.

Adults: Refer to specific product formulations and guidelines, as doses may vary based on the formulation type and intended use.

Mechanism of action

Cetyl acts primarily as a surfactant, reducing the surface tension between different phases in formulations. This property facilitates the even distribution of active ingredients, improving their absorption and efficacy. Additionally, its emollient quality forms a protective layer on the skin, preventing transepidermal water loss and enhancing hydration.

Pharmacodynamics

The pharmacodynamics of cetyl are characterized by its ability to act as an emollient, which helps to soften and soothe the skin. By forming a lipid barrier, it can help to mitigate skin irritation and dryness, making it particularly useful in formulations intended for sensitive or damaged skin. Its surfactant properties also allow for better integration of other ingredients, potentially enhancing their therapeutic effects.

Pharmacokinetics

Cetyl is not extensively absorbed through the skin when used topically; its primary role is localized at the site of application. Its fatty nature allows it to remain on the skin's surface, providing prolonged emollient effects. It is generally considered safe for topical use, with low systemic absorption and minimal risk of systemic side effects.

Pregnancy

Cetyl is generally considered safe for use during pregnancy, but it is advisable to consult a healthcare provider before use.

Breast-feeding

Cetyl is considered safe during breastfeeding, but it is recommended to consult a healthcare provider.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Cetyl alcohol
• Cetyl palmitate

Indications

• Solvent in pharmaceutical formulations
• Moisturizer and humectant in topical applications
• Potential use in the management of drug solubility issues

Dosage

Children: Refer to specific formulations and clinical guidelines, as dosing varies widely based on the application and formulation.

Adults: Refer to specific formulations and clinical guidelines, as dosing varies widely based on the application and formulation.

Mechanism of action

Glycols, particularly propylene glycol, act as humectants, which help to retain moisture in formulations. They can also enhance the solubility of drugs, aiding in their absorption when used as excipients. Propylene glycol is metabolized in the liver to lactate and subsequently to glucose, providing a source of energy when utilized in metabolic pathways.

Pharmacodynamics

The pharmacodynamics of glycols involve their ability to modulate the viscosity of solutions and enhance the solubility of other compounds. Propylene glycol can also facilitate the absorption of other drugs when used in formulations. It exhibits a low toxicity profile when used appropriately, but excessive systemic exposure can lead to metabolic acidosis and other adverse effects.

Pharmacokinetics

Glycols are rapidly absorbed when administered intravenously or orally. Propylene glycol is metabolized primarily in the liver, with a half-life varying based on the dose and individual metabolism. Renal excretion plays a role in the elimination of metabolites. Accumulation can occur in individuals with impaired liver or kidney function, necessitating careful monitoring of dosing in such populations.

Pregnancy

The safety of glycol in pregnancy is not well established. Consult healthcare professionals before use.

Breast-feeding

Glycol's effects during breastfeeding are not well characterized. Caution is advised.

Storage

Store in a cool, dry place away from direct sunlight and moisture.

Indications

• Used as an emulsifying agent in pharmaceutical formulations
• Used in food products for texture and stability
• May be indicated in topical preparations to enhance drug absorption

Dosage

Children: Refer to specific product guidelines as doses can vary widely based on formulation and intended use.

Adults: Refer to specific product guidelines as doses can vary widely based on formulation and intended use.

Mechanism of action

Monostearate functions primarily as a surfactant. It reduces the surface tension between components in a mixture, allowing for better emulsification of oils and water. This action enhances the dispersion of active ingredients and improves their absorption in the gastrointestinal tract.

Pharmacodynamics

As an emulsifier, monostearate facilitates the formation of stable emulsions, which can lead to improved drug delivery and absorption. Its ability to enhance solubility of lipophilic compounds can result in increased bioavailability of certain drugs, making them more effective.

Pharmacokinetics

Monostearate is generally considered non-toxic and is metabolized by the body through hydrolysis into glycerol and stearic acid. It is poorly absorbed in the gastrointestinal tract due to its large molecular structure, and any absorbed amounts may be further metabolized or excreted. The onset and duration of action depend on the formulation in which it is used.

Pregnancy

Monostearate is generally considered safe for use during pregnancy, but it is important to consult with a healthcare provider for personalized advice.

Breast-feeding

Monostearate is typically regarded as safe during breastfeeding, but a healthcare provider should be consulted to ensure no adverse effects on the infant.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Monostearate powder
• Monostearate capsules
• Monostearate ointment

Indications

• Constipation
• Dry skin
• Skin irritation

Dosage

Children: Refer to specific guidelines and prescribing information for paediatric dosing.

Adults: Refer to specific guidelines and prescribing information for adult dosing.

Mechanism of action

Paraffin acts as a lubricating agent in the gastrointestinal tract. It coats the stool and the intestinal walls, which helps to ease the passage of feces by reducing friction. This action promotes bowel movements and alleviates constipation. When used topically, it forms a barrier on the skin, which helps to retain moisture and protect against irritants.

Pharmacodynamics

Paraffin has a low viscosity and surface tension, which allows it to spread easily over surfaces. Its lubricating properties facilitate the movement of stool through the intestines, while its emollient properties help in maintaining skin hydration and barrier function. The onset of action for oral administration typically occurs within 6 to 8 hours, making it effective in treating occasional constipation.

Pharmacokinetics

Paraffin is not absorbed systemically when ingested; it remains in the gastrointestinal tract and is excreted unchanged in the feces. After oral administration, it acts locally in the intestines without significant systemic effects. When used topically, it remains on the skin surface and does not penetrate deeply, providing a protective layer without altering systemic pharmacokinetics.

Adverse effects

• Abdominal cramps
• Diarrhea
• Nausea
• Vomiting
• Lipid pneumonia (when aspirated)
• Electrolyte imbalances

Precautions

• Use with caution in patients with gastrointestinal obstruction
• Avoid in patients with a history of aspiration
• Monitor for signs of dehydration with prolonged use

Pregnancy

Use only if clearly needed. Consult a healthcare provider for advice.

Breast-feeding

Paraffin can be excreted in breast milk, use with caution.

Storage

Store at room temperature away from moisture and heat.

Formulations

• Liquid paraffin
• Soft paraffin (for topical use)

Indications

• Emulsifying agent in drug formulations
• Stabilizer for parenteral preparations
• Solubilizer for hydrophobic drug compounds
• Ingredient in topical formulations

Dosage

Children: Refer to specific product guidelines, as dosing varies based on formulation and intended use.

Adults: Refer to specific product guidelines, as dosing varies based on formulation and intended use.

Mechanism of action

Polysorbate functions primarily as an emulsifying agent. It reduces the surface tension between immiscible liquids, allowing them to mix more easily. This property is particularly useful in stabilizing emulsions and suspensions, facilitating the delivery of active pharmaceutical ingredients in various formulations.

Pharmacodynamics

Polysorbate does not exert pharmacological effects in the traditional sense, as it does not bind to specific receptors to elicit a physiological response. Instead, it plays a crucial role in modifying the physical properties of drug formulations, thereby enhancing drug delivery and absorption. Its ability to solubilize drugs enhances their bioavailability, particularly for poorly soluble compounds.

Pharmacokinetics

Polysorbate is generally considered to be non-toxic and is not absorbed to a significant extent when administered orally. It is metabolized by the liver and excreted primarily through the gastrointestinal tract. The pharmacokinetic profile may vary depending on the route of administration and the specific formulation in which it is used.

Adverse effects

• Allergic reactions
• Skin irritation
• Gastrointestinal disturbances

Precautions

• Use cautiously in patients with known allergies to polysorbates or related compounds
• Monitor for allergic reactions in susceptible individuals

Pregnancy

Polysorbate is generally considered safe for use during pregnancy, but consult with a healthcare provider for specific cases.

Breast-feeding

Polysorbate is considered safe during breastfeeding, but consult with a healthcare provider for individual advice.

Storage

Store at room temperature, away from direct sunlight and moisture.

Formulations

• Polysorbate 20
• Polysorbate 80

Indications

• Plant growth regulation
• Agricultural applications as a growth inhibitor

Dosage

Children: Not applicable.

Adults: Refer to the relevant agricultural guidelines for specific applications.

Mechanism of action

In an in vitro study, propylene acts as a plant growth inhibitor by inhibiting the oxidation of indole-3-acetic acid by peroxidase in the presence of superoxide anion radicals. This inhibition is linked to the activation of an iron complex (compound III) shuttle, which enhances the reaction rate between superoxide and peroxidase, ultimately affecting plant growth processes. Propylene is a less effective inhibitor compared to ethylene.

Pharmacodynamics

The pharmacodynamic effects of propylene are primarily observed in its role as a growth inhibitor in plants. By modulating the oxidation of phytohormones like indole-3-acetic acid, propylene can influence various growth responses in plants, potentially affecting processes such as cell elongation and division.

Pharmacokinetics

Information on the pharmacokinetics of propylene in humans is not well-documented, as its primary uses are industrial and agricultural. Its metabolism may be influenced by environmental factors, and its effects are primarily studied in the context of plant biology rather than human pharmacology.

Dosage

Children: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Adults: Refer to specific drug formulations and product labels as purified substances can vary widely in their use and dosing.

Mechanism of action

The mechanism of action for purified compounds varies widely depending on the specific substance. Generally, purified drugs exert their effects by interacting with specific biological targets, such as receptors, enzymes, or ion channels, leading to a desired therapeutic effect. This interaction can involve binding to receptors to activate or inhibit signaling pathways, modulating enzymatic activity, or altering physiological processes.

Pharmacodynamics

Pharmacodynamics describes the effects of a drug on the body and the relationship between drug concentration and effect. For purified drugs, this can involve dose-response relationships and the time course of their action. The purified form often enhances potency and reduces variability in response among patients, which can lead to more predictable therapeutic outcomes. The overall effect is determined by the drug's affinity for its target, the efficacy of the drug-receptor interaction, and the downstream signaling pathways activated as a result of this interaction.

Pharmacokinetics

Pharmacokinetics involves the absorption, distribution, metabolism, and excretion (ADME) of a drug. For purified substances, absorption can be more efficient due to the absence of impurities that may affect solubility or stability. Distribution may also be enhanced, leading to higher bioavailability. Metabolism can be influenced by the structure of the purified compound, as it may be metabolized more readily by liver enzymes. Excretion typically occurs through the kidneys or liver, depending on the molecular characteristics of the purified drug.

Pregnancy

Consult with a healthcare professional, as the safety of purified forms of medications during pregnancy may vary depending on the specific substance.

Breast-feeding

Consult with a healthcare professional, as the safety of purified forms of medications during breastfeeding may vary depending on the specific substance.

Storage

Store in a cool, dry place, away from light and moisture, and keep out of reach of children.

Dosage

Children: Refer to specific product information for dosing guidelines.

Adults: Refer to specific product information for dosing guidelines.

Pregnancy

Consult a healthcare professional before use. The effects of Soft during pregnancy are not well-documented.

Breast-feeding

Consult a healthcare professional before use. The safety of Soft during breastfeeding is not well-established.

Storage

Store in a cool, dry place away from direct sunlight.

Indications

• Emulsifying agent in topical formulations
• Stabilizing agent in oral drug formulations
• Food industry applications as an emulsifier
• Cosmetic formulations

Dosage

Children: Refer to specific formulation guidelines for dosage recommendations.

Adults: Refer to specific formulation guidelines for dosage recommendations.

Mechanism of action

Sorbitan acts primarily as a surfactant and emulsifier. Its amphiphilic nature allows it to reduce the surface tension between oil and water, thereby facilitating the formation and stabilization of emulsions. The hydrophilic part of the sorbitan molecule interacts with water, while the lipophilic part interacts with oils, promoting the mixing of immiscible liquids.

Pharmacodynamics

As an emulsifier, sorbitan enhances the bioavailability of lipophilic drugs by aiding their dispersion in aqueous environments. This property is particularly valuable in formulations where uniform distribution of active ingredients is critical for efficacy. Sorbitan may also impact the release profiles of drugs from emulsified formulations, potentially affecting the onset of action.

Pharmacokinetics

Sorbitan is generally considered to be poorly absorbed when administered orally, leading to minimal systemic exposure. Its primary role is local, serving as an excipient in formulations rather than as an active therapeutic agent. Due to its emulsifying properties, it may enhance the solubility and absorption of other drugs in the gastrointestinal tract, but the absorption characteristics of sorbitan itself are limited. Metabolism and excretion details specific to sorbitan are not well-documented, as it typically functions in a non-systemic capacity.

Pregnancy

Sorbitan has not been well studied in pregnant women. Use during pregnancy should be based on a risk-benefit assessment.

Breast-feeding

Sorbitan is generally considered safe during breastfeeding, however, there is limited data available.

Storage

Store at room temperature, away from moisture and heat. Keep container tightly closed.

Formulations

• Sorbitan monooleate
• Sorbitan monostearate
• Sorbitan tristearate

Indications

• Dry skin conditions
• Cosmetic formulations
• Emollient in topical creams and lotions
• Emulsifying agent in pharmaceutical preparations

Dosage

Children: For pediatric use, refer to specific product formulations and guidelines, as dosing may vary based on the formulation and concentration.

Adults: Stearyl alcohol is used topically in various formulations. Specific dosing is typically determined by the formulation and intended use, refer to product guidelines for detailed instructions.

Mechanism of action

Stearyl alcohol functions primarily as an emollient and emulsifier. It aids in the formation of stable emulsions by reducing the surface tension between oil and water phases, allowing for the creation of creams and lotions. Its hydrophobic tail interacts with lipids, while the hydroxyl group can form hydrogen bonds with water, enhancing moisture retention in the skin.

Pharmacodynamics

Stearyl alcohol acts by providing a protective barrier on the skin, reducing transepidermal water loss and enhancing hydration. Its emollient properties make it effective in softening and smoothing the skin, which can alleviate dryness and improve the overall appearance of the skin. Additionally, it can enhance the delivery of other active ingredients in topical formulations.

Pharmacokinetics

Stearyl alcohol is not significantly absorbed systemically when applied topically. Its primary action is local to the site of application, where it exerts its emollient effects. The compound is metabolized in the body to various fatty acids and alcohols, and it is excreted primarily through the skin and gastrointestinal tract, with minimal systemic exposure.

Pregnancy

Stearyl is generally considered safe for use during pregnancy; however, specific formulations should be evaluated for their ingredients.

Breast-feeding

Stearyl can be used while breastfeeding, but it's recommended to consult a healthcare provider for specific concerns regarding topical applications.

Storage

Store in a cool, dry place away from direct sunlight. Keep out of reach of children.

Formulations

• Cream
• Ointment
• Lotion

Indications

• Preservative in food and beverages
• Antioxidant agent
• Treatment of certain types of sulfite sensitivity

Dosage

Children: Refer to the BNF for Children for appropriate dosing information.

Adults: Refer to the specific product guidelines, as dosages may vary depending on the formulation and intended use.

Mechanism of action

Sulphite acts through various biochemical pathways, including the degradation of sulfoacetaldehyde and thiosulfate metabolism. It participates in the dissimilatory sulfate reduction process, converting sulfate to hydrogen sulfide, which is integral to sulfur cycling in the environment. Additionally, sulphites are involved in the degradation of tetrachloroethene and hypotaurine, highlighting their versatility in metabolic pathways.

Pharmacodynamics

The pharmacodynamics of sulphite involves its reactivity as a reducing agent and its ability to form complexes with various organic molecules. This property allows sulphite to function as an antioxidant, scavenging free radicals and preventing oxidative damage. However, excessive exposure to sulphite can lead to adverse effects, particularly in susceptible individuals, where it may provoke hypersensitivity reactions.

Pharmacokinetics

The pharmacokinetics of sulphite in humans are not extensively characterized, but it is known to be rapidly absorbed and metabolized. Once ingested, sulphite can be oxidized to sulfate, which is then excreted in urine. The metabolism and elimination of sulphite are influenced by factors such as liver function, individual susceptibility, and dietary intake. The half-life of sulphite in the body is relatively short, necessitating regular intake for sustained effects.

Pregnancy

There is limited data on the safety of sulphites in pregnancy. Caution is advised.

Breast-feeding

Limited data available; consult a healthcare provider for specific advice regarding breastfeeding.

Storage

Store in a cool, dry place, away from direct sunlight and moisture.

Dosage

Children: Refer to the BNF for Children for appropriate paediatric dosing information.

Adults: Refer to the specific BNF guidelines for dosing information as it may vary based on the condition being treated.

Mechanism of action

The mechanism of action for White involves its interaction with specific biological pathways, leading to the desired pharmacological effects. The precise pathways may include modulation of receptor activity or alteration of enzyme function, although specific details are not provided.

Pharmacodynamics

Pharmacodynamics of White includes its effects on the body, including therapeutic effects and potential side effects. As a compound, it may exert its influence on multiple physiological systems, which can lead to changes in symptoms or disease progression.

Pharmacokinetics

Pharmacokinetics of White involves its absorption, distribution, metabolism, and excretion. Understanding these parameters can help predict how the drug behaves in the body, including onset of action and duration of effect. Detailed pharmacokinetic data is not specified.

Mechanism of action

Ethanol affects the brain’s neurons in several ways. It alters their membranes as well as their ion channels, enzymes, and receptors. Alcohol also binds directly to the receptors for acetylcholine, serotonin, GABA, and the NMDA receptors for glutamate. The sedative effects of ethanol are mediated through binding to GABA receptors and glycine receptors (alpha 1 and alpha 2 subunits). It also inhibits NMDA receptor functioning. In its role as an anti-infective, ethanol acts as an osmolyte or dehydrating agent that disrupts the osmotic balance across cell membranes. ... Ethanol is known to affect a large number of membrane proteins that participate in signaling pathways such as neurotransmitter receptors, enzymes, and ion channels, and there is extensive evidence that ethanol interacts with a variety of neurotransmitters. The major actions of ethanol involve enhancing the inhibitory effects of gamma-aminobutyric acid (GABA) at GABAa receptors and blockade of the N-methyl-D-aspartate (NMDA) subtype of glutamate, an excitatory amine acid (EAA) receptor. Animal studies indicate that the acute effects of ethanol result from competitive inhibition of glycine binding to NMDA receptor and disruption of glutamatergic neurotransmission by inhibiting the response of the NMDA receptor. Persistent glycine antagonism and attenuation of glutamatergic neurotransmission by chronic ethanol exposure results in tolerance to ethanol by enhancing EAA neurotransmission and NMDA receptor upregulation. The latter appears to involve selective increases in NMDA R2B subunit concentrations and other molecular changes in specific brain loci. The abrupt withdrawal of ethanol thus produces a hyperexcitable state that leads to the ethanol withdrawal syndrome and excitotoxic neuronal death. GABA-mediated inhibition, which normally acts to limit excitation, is eliminated during ethanol withdrawal syndrome and further intensifies this excitation. In addition, NMDA receptors function to inhibit the release of dopamine in the nucleus accumbens and mesolimbic structures, which modulate the reinforcing action of addictive xenobiotics such as ethanol. By inhibiting NMDA receptor activity, ethanol could increase dopamine release from the nucleus accumbens and ventral tegmental area and could thus create dependence. Chronic ethanol administration also results in tolerance, dependence, and an ethanol withdrawal syndrome, mediated, in part, by desensitization and or downregulation of GABAa receptors. The development of alcoholic ketoacidosis (AKA) requires that a combination of physical and physiologic events occur. The normal response to starvation and depletion of hepatic glycogen stores is for amino acids to be converted to pyruvate. Pyruvate can serve as a substrate for gluconeogenesis, be converted to acetyl-CoA, which can enter the Krebs cycle or can be utilized in various biosynthetic pathways (eg, fatty acid, ketone bodies, cholesterol, and acetylcholine) ... Ethanol metabolism generates NADH, resulting in an excess of reducing potential. This high redox state favors the conversion of pyruvate to lactate, diverting pyruvate from being a substrate for gluconeogenesis. To compensate for the lack of normal metabolic substrates, the body mobilizes fat from adipose tissue and increased fatty acid metabolism as an alternative source of energy. This response is mediated by a decrease in insulin and an increased secretion of glucagon, catecholamines, growth hormone, and cortisol. Fatty acid metabolism results in the formation of acetyl-CoA and it combines with the excess acetate that is generated from ethanol metabolism to form acetoacetate. Most of the acetoacetate is reduced to beta-hydroxybutyrate due to the excess reducing potential or high redox state of the cell. Volume depletion interferes with the renal elimination of acetoacetate and beta-hydroxybutyrate, and contributes to the acidosis. An elevated lactate concentration may result from shunting from pyruvate or

Pharmacodynamics

Alcohol produces injury to cells by dehydration and precipitation of the cytoplasm or protoplasm. This accounts for its bacteriocidal and antifungal action. When alcohol is injected in close proximity to nerve tissues, it produces neuritis and nerve degeneration (neurolysis). Ninety to 98% of ethanol that enters the body is completely oxidized. Ethanol is also used as a cosolvent to dissolve many insoluble drugs and to serve as a mild sedative in some medicinal formulations. Ethanol also binds to GABA, glycine, NMDA receptors and modulates their effects. Ethanol is also metabolised by the hepatic enzyme alcohol dehydrogenase.

Mechanism of action

Ketoconazole interacts with 14-α-sterol demethylase, a cytochrome P-450 enzyme necessary for the conversion of lanosterol to ergosterol. This results in inhibition of ergosterol synthesis and increased fungal cellular permeability due to reduced amounts of ergosterol present in the fungal cell membrane. This metabolic inhibition also results in accumulation of 14α-methyl-3,6-diol, a toxic metabolite. The increase in membrane fluidity is also thought to produce impairment of membrane-bound enzyme systems as components become less closely packed. Ketoconazole blocks the synthesis of ergosterol, a key component of the fungal cell membrane, through the inhibition of cytochrome P-450 dependent enzyme lanosterol 14alpha-demethylase responsible for the conversion of lanosterol to ergosterol in the fungal cell membrane. This results in an accumulation of methylated sterol precursors and a depletion of ergosterol within the cell membrane thus weakening the structure and function of the fungal cell membrane. Like other azole antifungal agents, ketoconazole presumably exerts its antifungal activity by altering cellular membranes, resulting in increased membrane permeability, secondary metabolic effects, and growth inhibition. Although the exact mechanism of action of ketoconazole has not been fully determined, it has been suggested that the fungistatic activity of the drug may result from interference with ergosterol synthesis, probably via inhibition of C-14 demethylation of sterol intermediates (e.g., lanosterol). The fungicidal activity of ketoconazole at high concentrations may result from a direct physiochemical effect of the drug on the fungal cell membrane.

Pharmacodynamics

Ketoconazole, similarly to other azole antifungals, is a fungistatic agent which causes growth arrest in fungal cells thereby preventing growth and spread of the fungus throughout the body.

Mechanism of action

In an in vitro study of the mechanism of action of ethylene as a plant growth inhibitor, the effects of ethylene and some of its analogs, including propylene, on the oxidation of indole-3-acetic acid were examined. Ethylene and its analogs inhibited the oxidation of indole-3-acetic acid by peroxidase under conditions where the iron complex (compound III, an oxy-ferrous complex of peroxidase) shuttle was activated. Inhibition occurred only in the presence of the superoxide anion radical 02(-). Spectral and kinetic data indicated that ethylene and its analogs enhanced the rate of reaction of 02(-) with peroxidase; ie, the iron complex (compound III) shuttle, resulting in the formation of compound III. Propylene was a less effective inhibitor than ethylene.